|
AMICI |
MANGANO |
MARTINELLI |
ROSSI DRAGO |
|
Session Th1.7 |
Session Th1.8 |
Session Th1.9 |
Session Th1.10 |
|
G.S. Mechanical and physical properties4 |
T.S. Sustainable Composites |
T.S. Thermal methods for composite materials |
G.S. Testing and characterization 1 |
| 8.30 |
8.50 |
MULTI-SCALE AND MULTI-PHYSICS COUPLED MODELING OF THE EVOLUTION OF INTERNAL STRESSES AND PART SHAPE OF CARBON-EPOXY COMPOSITESM.Hirsekorn (Onera) |
BIODEGRADABLE POLYVINYLALCOHOL BASED SINGLE POLYMER COMPOSITESA.Dorigato (University Of Trento) |
3D FINITE LAYER METHOD FOR THE ANALYSIS OF PIEZOELECTRICG.Akhras (Royal Military College Of Canada) |
ANALYSIS OF THE BEHAVIOUR OF WOOD AND WELDED WOOD UNDER TENSILE-SHEAR OUT-OF-PLANE LOADSC.J.Cognard (Ensta Bretagne) |
| 8.50 |
9.10 |
MODE I FRACTURE TOUGHNESS BEHAVIOUR OF EPOXY RESIN-CARBON FIBER COMPOSITES CURED BY IONISING RADIATION.G.Pitarresi (University Of Palermo) |
MELT DRIPPING AND FLAMMABILITY BEHAVIOUR OF BIODEGRADABLE NATURAL FIBRE - REINFORCED THERMOPLASTIC COMPOSITES B.K.Kandola (University Of Bolton) |
THERMOMECHANICAL ANALYSIS OF FATIGUE DEGRADATIONS IN CARBON EPOXY LAMINATESW.Ophélie (Ecole Centrale Nantes) |
EXPERIMENTAL AND NUMERICAL EVALUATION OF CRASH- AND IMPACT LOADED TEXTILE REINFORCED THERMOPLASTIC COMPONENTSA.Hornig (Tu Dresden) |
| 9.10 |
9.30 |
DESIGN AND FABRICATION OF CARBON FIBER REINFORCED COMPOSITE TRUSS CORE SANDWICH STRUCTURESL.Ma (Harbin Institute Of Technology) |
INVESTIGATION OF COMPETITIVE ADSORPTION OF FIBRE SIZING COMPONENTS: POSSIBILITIES OF ELECTROKINETICS C.Bellmann (Leibniz Institut Of Polymer Research Dresden) |
THERMAL ANALYSIS AND MECHANICAL CHARACTERIZATION OF GFRP JOINTSU.Galietti (Politecnico Di Bari) |
INVERSE IDENTIFICATION OF MESO-LEVEL MATERIAL PROPERTIES IN WOVEN FABRICS USING MULTI-OBJECTIVE OPTIMIZATIONM.Komeili (University Of British Columbia) |
| 9.30 |
9.50 |
EFFECT OF THE FILLER SHAPE ON THE PROPERTIES OF RIGID POLYURETHANE FOAMV.Yakushin (Latvian State Institute Of Wood Chemistry) |
MICROFIBRILLATED CELLULOSE REINFORCED GALACTOGLUCOMANNAN AND ARABINOXYLAN FILMSK.S.Mikkonen (University Of Helsinki) |
EFFECT OF FILLER TREATMENT ON THE THERMAL PROPERTIES OF COMPOSITES AND POLYMER BLENDSE.Govorcin bajsic (Faculty Of Chemical Engineering And Technology) |
BEHAVIOUR OF IMPACTED ASYMMETRIC SANDWICH SHELLS UNDER AXIAL COMPRESSIVE LOADINGE.Möhle (Technical University Braunschweig) |
| 9.50 |
10.10 |
MICROSTRUCTURE AND MECHANICAL PROPERTIES AT ELEVATED TEMPERATURES OF POLYCRYSTALLINE AL2O3-YAG-ZRO2 EUTECTIC-COMPOSITION COMPOSITESM.Jiménez-melendo (Universidad De Sevilla) |
EFFECT OF INTERFACIAL ADHESION ON MECHANICAL BEHAVIOUR OF BAMBOO FIBRE REINFORCED THERMOPLASTIC COMPOSITESC.A.Fuentes (Kuleuven) |
THE ROLE OF RESIDUAL THERMAL STRESS IN COMPOSITE INTERFACIAL STRENGTH BY A NOVEL SINGLE FIBRE TECHNIQUE L.Yang (University Of Strathclyde) |
INVESTIGATION IN MECHANICAL AND THERMAL PROPERTIES FOR THREE-DIMENSIONAL HOLLOW KNITTED FABRIC COMPOSITEA.Ohtani (Gifu University) |
| 10.10 |
10.30 |
|
|
|
|
| 10.30 |
11.15 |
PLenary Lecture 4: Lightweight Construction In Automotive : The Lamborghini Aventador
Luciano De Oto (Lamborghini)
Palazzo del Cinema |
|
Session Th2.7 |
Session Th2.8 |
Session Th2.9 |
Session Th2.10 |
|
G.S. Mechanical and physical properties 5 |
T.S. Sustainable Composites |
T.S. Thermal methods for composite materials |
G.S. Testing and characterization 2 |
| 11.20 |
11.40 |
DEVELOPMENT AND CHARACTERIZATION OF RENEWABLE SOURCE COMPOSITES TO REPLACE PETROL-BASED POLYMERS INTO INTERIOR DOOR TRIMSN.C.Loureiro (University Of Porto - Faculty Of Engineering) |
PREPARATION AND CHARACTERIZATION OF GREEN NANOCOMPOSITES BASED ON CELLULOSE NANOFIBRE AND NATURAL RUBBER LATEXE.Abraham (Cms College, Kottayam) |
INFLUENCE OF LOADING CASE ON DETECTABILITY OF DELAMINATIONS BY ACTIVE THERMOGRAPHYH.Schmutzler (Technische Universität Hamburg-harburg) |
AN INVESTIGATION INTO THE RELATIONSHIP BETWEEN INTRALAMINAR CRACK GROWTH AND DELAMINATION, LEADING TO COMPROMISED STRUCTURAL AND MECHANICAL PERFORMANCE.D.Mortell (University Of Limerick) |
| 11.40 |
12.00 |
SYNTHESIS OF NANOCOMPOSITES BASED ON FLUORINE CONTAINING EPOXY RESIN REINFORCED WITH SURFACTANT FUNCTIONALIZED MWCNTSC.M.Damian (University Politehnica Of Bucharest) |
HYBRID SUSTAINABLE NANOCOMPOSITES CONTAINING NANOCELLULOSE FIBRES AND CROSS-LINKED ALUMINOSILICATESB.Duchemin (Le Havre University) |
FATIGUE DAMAGE IN NOTCHED GFR COMPOSITES WITH THERMAL AND DIGITAL IMAGE MEASUREMENTS F.W.Panella (Università Del Salento) |
STATISTICAL ANALYSIS OF EFFECT OF POLYAMIDE VEIL LAYER ON QUALITY AND MECHANICAL PROPERTY OF VARTM CFRPY.Yoshida (Tokyo University Of Science) |
| 12.00 |
12.20 |
AN APPROACH FOR THE EXPLICIT DETERMINATION OF THE IN-SITU MODULUS OF MATRICES IN FIBRE REINFORCED PLASTICSA.Krimmer (Euros Gmbh) |
A PRELIMINARY STUDY OF PHYSICAL AND MECHANICAL PROPERTIES OF SUSTAINABLE HEMP FIBERS BASED COMPOSITE MATERIALS FOR BUILDING INSULATED WALLSS.Manzi (Università Di Bologna - Fac. Di Ingegneria) |
NON DESTRUCTIVE EVALUATION OF COMPOSITE MATERIALS WITH NEW THERMAL METHODSU.Galietti (Politecnico Di Bari) |
DETERMINATION OF ISOCHRONOUS CURVES OF CARBON/EPOXY COMPOSITES BY CREEP TESTSG.Marinucci (Nuclear Research Institute) |
| 12.20 |
12.40 |
RESIDUAL STRESSES OF CROSS-PLY LAMINATES AND THEIR EFFECT ON PLY STRENGTHJ.Eman (Swerea Sicomp Ab) |
NANCOCELLULOSE FIBERS AND OTHER NATURAL POLYMERS AS UNIQUE PIECES FOR THE DEVELOPMENT OF SUSTAINABLE COMPOSITES: A CONTRIBUTION@UA.PT C.Freire (Uiversity Of Aveiro) |
|
CRUCIFORM SPECIMEN DESIGN FOR BIAXIAL ANALYSIS OF COMPOSITEA.Rashedi (Nanyang Technological University) |
| 12.40 |
13.00 |
EXPERIMENTAL INVESTIGATION OF THERMAL CONDUCTIVITY OF COMPOSITESP.Mannberg (Swerea Sicomp) |
NUMERICAL AND EXPERIMENTAL INVESTIGATION ON WOODEN PROFILES WITH FIBER CONFINEMENTP.Haller (Technische Universität Dresden) |
|
USING THE INCREMENTAL HOLE-DRILLING TECHNIQUE FOR MEASURING RESIDUAL STRESSES IN FIBRE-REINFORCED POLYMER COMPOSITESJ.P.Nobre (University Of Coimbra) |
| 14.15 |
14.45 |
|
|
|
|
|
Session Th3.7 |
Session Th3.8 |
Session Th3.9 |
Session Th3.10 |
|
G.S. Mechanical and physical properties 6 |
G.S. Applications 2- Components and Structures |
G.S. FRP reinforced concrete |
G.S. Sandwich technologies |
| 14.50 |
15.10 |
STRENGTH OPTIMISATION OF ORTHOTROPIC PLATES THROUGH INVARIANT FORMULATION OF PHENOMENOLOGICAL FAILURE CRITERIAA.Catapano (Upmc Paris 6 And Crp Henri Tudor) |
DEVELOPMENT OF METEOROLOGICAL TOWERS USING ADVANCED COMPOSITE MATERIALSD.Polyzois (University Of Manitoba) |
ACTIVE REINFORCEMENT OF CYLINDRICAL RC COLUMNS WITH A FRP SHEET AND EXPANSIVE MICRO-CONCRETEL.Echevarria (Instituto De Ciencias De La Construcción Eduardo Torroja (ietcc-csic)) |
APPLYING THE SOLID-SHELL CONCEPT TO SANDWICH STRUCTURESJ.Wimmer (Rwth Aachen University) |
| 15.10 |
15.30 |
DYNAMICS OF AXIALLY LOADED AND PARTIALLY INTERACTING COMPOSITE BEAMSS.Grundberg (Umea University) |
STRENGTH/STIFFNESS QUALITY CONTROL OF FABRIC REINFORCED COMPOSITE IN THICK-WALLED BEARING RINGS S.B.Sapozhnikov (South Ural State University) |
MECHANICAL BEHAVIOR OF CFRP STRENGTHENED SHORT RC WALL SUBJECTED TO MONOTONIC AND CYCLIC LOAD TEST S.Qazi (Insa Lyon) |
C0 FE MODEL FOR THE ANALYSIS OF LAMINATED SOFT CORE SANDWICH PLATES A.Chakrabarti (Indian Institute Of Technology Roorkee) |
| 15.30 |
15.50 |
DYNAMICS OF PARTIALLY INTERACTING COMPOSITE BEAMSO.A.Hassan (Umea University) |
COMPRESSED HYDROGEN FORM-FITTED TANK L.Farines (Mahytec) |
FRP DEBONDING PREVENTION OF STRENGTHENED CONCRETE MEMBERS UNDER DYNAMIC LOAD USING SMART PIEZOELECTRIC MATERIALS (PZT)M.E.Voutetaki (Democritus University Of Thrace) |
HIGH ORDER ANALYTICAL AND 3D FINITE ELEMENT SOLUTION FOR BIAXIAL WRINKLING ANALYSIS OF COMPOSITE-FACED SANDWICH PLATES WITH SOFT COREM.M.Kheirikhah (Islamic Azad University, Qazvin Branch) |
| 15.50 |
16.10 |
MECHANICAL BEHAVIOR OF TUFTED COMPOSITEX.Zhang (Université De Technologie De Compiègne) |
FEASIBILITY STUDY OF A LIFTING WORK PLATFORM WITH ARMS MADE BY COMPOSITE MATERIALS.L.Solazzi (Università Di Brescia) |
EXPERIMENTAL ANALYSIS OF COMPOSITE TIMBRE-CONCRETE WALL ELEMENTO.A.Hassan (Umea University) |
VISCOELASTIC BEHAVIOR OF COMPOSITE SANDWICH BEAM IN BENDINGM.J.Cerny (Czech Technical University, Klokner Institute) |
| 16.10 |
16.30 |
UNDERSTANDING THE BUCKLING PHENOMENON OF COATINGSChristophe COUPEAU (Institut Pprimme, University of Poitiers, FRANCE) |
MECHANICAL BEHAVIOUR OF 700 BAR TYPE IV HIGH PRESSURE VESSEL: COMPARISON BETWEEN SIMULATIONS AND EXPERIMENTS THROUGH OSIRHYS IV PROJECTS.Villalonga (Cea) |
SHAKEDOWN LIMIT IN BRITTLE-MATRIX COMPOSITES WITH PLASTIC CRACK BRIDGING FIBERS UNDER COMBINED TRACTION-FLEXUREA.Spagnoli (University Of Parma) |
DESIGN OF LIGHT-WEIGHT SANDWICH PANELS FOR TRAILERSG.Allikas (Tallinn University Of Technology) |
| 16.30 |
16.50 |
|
|
|
|
|
Session Th4.7 |
Session Th4.8 |
Session Th4.9 |
Session Th4.10 |
|
|
G.S. Applications 3 - Components and Structures |
|
|
| 16.50 |
17.10 |
|
TIME DEPENDENT BEHAVIOUR OF GFRP PULTRUDED PROFILES AND POLYESTER PVC COATED FABRIC FOR BUILDING COMPOSITE ACTIVE TENSILE STRUCTURESG.Carra (Politecnico Di Milano) |
|
|
| 17.10 |
17.30 |
|
MODELLING THE INFLUENCE OF SPEED OF TESTING AND TEMPERATURE ON THE BEHAVIOUR OF POLYURETHANE FOAMSD.A.Apostol (University Politehnica Of Bucharest) |
|
|
| 17.30 |
17.50 |
|
MULTI-TOW SHEARING MECHANISM FOR HIGH-SPEED MANUFACTURING OF VARIABLE ANGLE TOW COMPOSITESB.C.Kim (University Of Bristol) |
|
|
| 17.50 |
18.10 |
|
EXPERIMENTAL ANALYSIS BY THERMOGRAPHY AND CONDUCTIVE HEAT FLUX SENSORS OF THE CURING STAGE OF COMPOSITE PARTS MADE BY RESIN INFUSION (RI). U.Pineda (Cardenal Herrera University) |
|
|
| 18.10 |
18.30 |
|
SELECTION OF WOVEN FABRIC COMPOSITES USING A MULTI-CRITERIA DECISION MAKING TECHNIQUE AND MESO-LEVEL FINITE ELEMENT SIMULATIONA.S.Milani (University Of British Columbia ) |
|
|
