|
FESTE |
HOFFMAN |
PERLA |
WELLES |
|
Session Th1.3 |
Session Th1.4 |
Session Th1.5 |
Session Th1.6 |
|
Complex materials for self-healing, regeneration and structural remodeling |
G.S. Bio-based composites 3 |
T.S. Graphene-based Polymer Nanocomposites: Production, Properties and Applications |
T.S. Probabilistic approach of behaviour and breaking of composites and structures |
| 8.30 |
8.50 |
EFFECT OF HEALING AGENT-LOADED MICROCAPSULES ON THE MECHANICAL PROPERTIES OF SELF-HEALING EPOXY COMPOSITESA.Czeller (Budapest University Of Technology And Economics) |
EXPERIMENTAL INVESTIGATION INTO VOID CONTENT AND MECHANICAL PROPERTIES OF CURED FLAX/EPOXY PREPREGS S.Phillips (Mcgill University) |
UNDERSTANDING THE PROPERTY ENHANCEMENT MECHANISMS IN EXFOLIATED GRAPHITE NANOPLATELETS REINFORCED POLYMER NANOCOMPOSITES K.Kalaitzidou (Georgia Institute Of Technology) |
A 3D FINITE ELEMENT ANALYSIS OF STATIC STRESS CONCENTRATIONS AROUND A BROKEN FIBREY.Swolfs (Kuleuven) |
| 8.50 |
9.10 |
SELF-HEALING BEHAVIOUR OF IONOMERS AND IONOMER COMPOSITES UNDER BALLISTIC IMPACT TESTS AT DIFFERENT SPEEDSA.M.Grande (Politecnico Di Milano) |
EFFECT OF YARN STRUCTURE ON MECHANICAL PROPERTIES OF TWISTED YARNS AND GREEN COMPOSITES REINFORCED WITH TWISTED YARNR.Nakamura (Nihon University) |
TENSILE MECHANICAL PROPERTIES OF EMBEDDED SINGLE, BI- AND TRI- LAYER GRAPHENE FLAKES INTO A POLYMER SUBSTRATE G.Tsoukleri (Forth/ Ice_ht - Un. Of Patras) |
THREE-DIMENSIONAL ANALYSIS USING PROBABILISTIC MULTISCALE APPROACHES FOR PREDICTING MACROSCOPIC MECHANICAL BEHAVIOURS AND FAILURE STRENGTH IN UNIDIRECTIONAL CARBON FIBRE-REINFORCED EPOXY COMPOSITESB.Patamaprohm (Centre Des MatEriaux, Ecole Des Mines De Paris) |
| 9.10 |
9.30 |
COMPUTER SIMULATION OF STRUCTURAL REMODELING AND HEALING OF BONER.Weinkamer (Max Planck Institute Of Colloids And Interfaces) |
COMPOSITES BASED ON POLY(BUTYLENE SUCCINATE) (PBS) AND LIGNOCELLULOSIC FIBERSN.Bartolucci (University Of Bologna) |
FRACTURE TOUGHNESS AND THERMO-MECHANICAL PROPERTIES OF FEW LAYER GRAPHENE /EPOXY NANO-COMPOSITESS.Chandrasekaran (Technische Universitat Hamburg-harburg) |
PROBABILISTIC SIMULATION FOR FAILURE ANALYSIS OF TEXTILE-REINFORCED COMPOSITESM.Thieme (Tu Dresden) |
| 9.30 |
9.50 |
BIOMIMICRY OF MECHANOTRANSDUCTION IN THE REMODELLING OF ADVANCED FIBRE REINFORCED COMPOSITESR.S.Trask (University Of Bristol) |
DEVELOPMENT OF HEAT RESISTANT BIODEGRADABLE POLYMER MADE FROM PLAT.Tabi (Budapest University Of Technology And Economics) |
PROCESSING AND PROPERTIES OF SELF-ALIGNED GRAPHENE/EPOXY NANOCOMPOSITESN.Yousefi (The Hong Kong University Of Science And Technology) |
PROBABILISTIC THERMO-CHEMICAL ANLAYSIS OF A PULTRUDED COMPOSITE RODI.Baran (Technical University Of Denmark (dtu)) |
| 9.50 |
10.10 |
MECHANOCHEMICAL APPROACHES TO AUTONOMIC REMODELING AND REGENERATIONJ.Moore (University Of Illinois ) |
CHARACTERISATION OF THE MECHANICAL PERFORMANCE OF NATURAL FIBRES FOR LIGHTWEIGHT AUTOMOTIVE APPLICATIONS. J.L.Rudeiros-fernández (University Of Strathclyde) |
GRAPHENE MODIFIED ELECTROSPUN PVA NANOFIBROUS MEMBRANES FOR GLUCOSE OXIDASE IMMOBILIZATIONC.M.Wu (Fengchia University) |
STUDY OF MICROSTRUCTURE EFFECT ON THE MECHANICAL PROPERTIES OF HETEROGENEOUS MATERIALS BY USING STATISTICAL CONTINUUM THEORYA.Makradi (Crp Henri Tudor) |
| 10.10 |
10.30 |
|
|
|
|
| 10.30 |
11.15 |
PLenary Lecture 4: Lightweight Construction In Automotive : The Lamborghini Aventador
Luciano De Oto (Lamborghini)
Palazzo del Cinema |
|
Session Th2.3 |
Session Th2.4 |
Session Th2.5 |
Session Th2.6 |
|
Complex materials for self-healing, regeneration and structural remodeling |
G.S. Bio-based composites 4 |
T.S. Graphene-based Polymer Nanocomposites: Production, Properties and Applications |
G.S. Applications 1 - Materials and Structures |
| 11.20 |
11.40 |
MOLECULAR DESIGN RULES FOR BLAST-RESISTANT HONEYCOMB STRUCTURESM.Doherty (University Of California Santa Barbara) |
VISCOELASTIC PROPERTIES OF BIODEGRADABLE CELLULOSE DIACETATE NANOCOMPOSITES CONTAINING SILICA NANOPARTICLE SURFACE-MODIFIED WITH CELLULOSE ACETATE BUTYRATE M.Aliakbarnia (Islamic Azad Univ.science And Research Branch) |
OPTIMIZATION OF THE REINFORCEMENT OF POLYMER-BASED NANOCOMPOSITES WITH GRAPHENER.J.Young (University Of Manchester) |
CHARACTERIZATION OF MECHANICAL PROPERTIES OF POLYMER CONCRETE USING MIXTURE DESIGN OF EXPERIMENTS |
| 11.40 |
12.00 |
SCALING RELATIONSHIPS FOR BIO-INSPIRED BRICK AND MORTAR SYNTHETIC COMPOSITES M.Begley (University Of California, Santa Barbara) |
BIOBASED POLYMERS AND COMPOSITESR.Wool (University Of Delaware) |
SPRAYING LAYER-BY-LAYER POLY(VINYL ALCOHOL) - GRAPHENE OXIDE NANOCOMPOSITESC.Sellam (Queen Mary University Of London) |
EXPERIMENTS ON LAMINATED PLATE WITH EXTENSION/TWIST COUPLINGR.D.Reveillon (Femto-st) |
| 12.00 |
12.20 |
|
FABRICATION METHOD AND MECHANICAL PROPERTIES OF CARBON/CARBON COMPOSITES WITH BACTERIAL CELLULOSEY.Ozawa (Fukushima University) |
PREPARATION OF GRAPHENE OXIDE REINFORCED POLY (METHYL METHACRYLATE) NANOCOMPOSITESS.Morimune (Kobe University) |
BUCKLING ANALYSIS OF VARIABLE ANGLE TOW COMPOSITE PLATES USING DIFFERENTIAL QUADRATURE METHODG.Raju (Univesity Of Bristol) |
| 12.20 |
12.40 |
|
DEVELOPMENT OF NEW APPROACH BASED ON RAMAN SPECTROSCOPY TO STUDY THE DISPERSION OF EXPANDED GRAPHITE IN POLY(LACTIDE)A.Laachachi (Crp Henri Tudor) |
POLYDOPAMINE EMBEDDED REDUCED GRAPHENE OXIDE PAPERJ.H.Byun (Korea Institute Of Materials Science) |
|
| 12.40 |
13.00 |
|
WOVEN FLAX FABRIC FIBER REINFORCED IN-SITU POLYMERIZED POLY(BUTYLENE TEREPHTHALATE) COMPOSITES PRODUCED BY RTM C.M.Romão (Faculty Of Egineering Of University Of Porto ) |
|
HEATING SHAPE MEMORY POLYMERS IN ALTERNATIVE WAYS: MICROWAVE AND DIRECT ELECTRICAL HEATING.M.Fabré (Katholieke Universiteit Leuven) |
| 14.15 |
14.45 |
|
|
Keynote lecture 8: Current & future evolution of Airbus composite structures
Francois Pons (AIRBUS – France) |
|
|
Session Th3.3 |
Session Th3.4 |
Session Th3.5 |
Session Th3.6 |
|
Complex materials for self-healing, regeneration and structural remodeling |
G.S. Bio-based composites 5 |
G.S. Multiscale modelling: Nanocomposites |
G.S. Multifunctional composites 1 |
| 14.50 |
15.10 |
|
CYCLIC FATIGUE BEHAVIOR OF WOVEN HEMP/EPOXY COMPOSITE: DAMAGE ANALYSISD.S.De vasconcellos (Institut Pprime) |
MULTISCALE MODELING OF HYGROTHERMAL BEHAVIOR OF EPOXY-BASED NANOCOMPOSITESM.Cho (Seoul National University) |
RESEARCH ACTIVITIES ON NANO-MATERIALS AND ELECTROMAGNETIC PROTECTION OF COMPOSITES AERONAUTICAL STRUCTURESV.Quero lopez (Eads-casa Airbus Military) |
| 15.10 |
15.30 |
|
BACTERIAL CELLULOSE AS THE BINDER FOR NATURAL FIBRE PREFORMS TO PRODUCE GREEN NANOCOMPOSITESK.Y.Lee (Imperial College London) |
EFFECT OF CARBON NANOTUBES (CNT) ON THE THERMAL CONDUCTIVITY OF NANOCOMPOSITES USING A NEW RVE APPROACHA.M.Arif (King Fahd University Of Petroleum ) |
CHARACTERIZATION OF CARBON NANOTUBE DOPED CARBON FIBER PREPREG LAMINATEJ.Engström (Swerea Sicomp Ab) |
| 15.30 |
15.50 |
|
MECHANICAL BEHAVIOR OF SUNFLOWER STEM FOR BIO-COMPOSITE APPLICATIONSJ.D.Mathias (Irstea) |
TRACING THE SUPERIOR THERMO-MECHANICAL PROPERTIES IN NANOCOMPOSITES OF CROSSLINKED FILLERS AND INTERFACES: MOLECULAR POINT OF VIEW E.Ozden-yenigun (Sabanci University) |
COMPARISON OF ADDITIVE AND REACTIVE PHOSPHORUS-BASED FLAME RETARDANTS IN CARBON FIBRE REINFORCED EPOXY RESIN COMPOSITESB.Szolnoki (Budapest University Of Technology And Economics) |
| 15.50 |
16.10 |
|
TOOTH ENAMEL AS A SMART BIOCOMPOSITE FOR FRACTURE RESISTANCE H.Chai (Tel Aviv University) |
|
SWITCHABLE FIBER REINFORCED STRUCTURES - FROM SMART MATERIALS TO COMPONENTSM.Gurka (Institute Fur Verbundwerkstoffe Gmbh) |
| 16.10 |
16.30 |
|
MULTIFUNCTIONAL LIGHTWEIGHT BIO-NANOCOMPOSITE STRUCTURESS.Iannace (National Research Council Of Italy) |
|
DESIGN OPTIMIZATION AND FABRICATION OF CARBON NANOTUBE AND GRAPHENE NANOPLATELET BASED MULTISCALE COMPOSITES FOR EMI SHIELDINGJ.R.Gnidakouong ngouanom (Ulsan National Institute Of Science And Technology) |
| 16.30 |
16.50 |
|
|
|
|
|
Session Th4.3 |
Session Th4.4 |
Session Th4.5 |
Session Th4.6 |
|
Complex materials for self-healing, regeneration and structural remodeling |
|
G.S. Ceramic matrix: Modelling and applications |
G.S. Multifunctional composites 2 |
| 16.50 |
17.10 |
|
|
OXIDE-CARBON REFRACTORIES: CERAMIC MATRIX COMPOSITES FOR HIGH TEMPERATURE APPLICATIONS DURING TREATMENT OF MOLTEN STEELG.Lenz e silva (Sao Paulo University) |
INSITU SAXS/WAXS STUDY OF THE DEVELOPING PROCESS OF GEOPOLYMER STRUCTURESS.Zorica (University Centre For Professional Studies) |
| 17.10 |
17.30 |
|
|
VALIDATION OF PY-C CHEMICAL VAPOUR DEPOSITION AND INFILTRATION PROCESS CODESF.Burgio (Enea ) |
EFFECT OF THE SHEAR CORRECTION FUNCTION IN THE FGM BEAMS MODAL ANALYSIS.J.Hrabovsky (Slovak University Of Tecnnology) |
| 17.30 |
17.50 |
|
|
MODELLING OF THE EVOLUTION OF THE FAILURE PROBABILITY OF A SELF-HEALING CERAMIC MATRIX COMPOSITEE.Baranger (Lmt-cachan) |
INTEGRATION AND EVALUATION OF MECHANICAL AND ELECTRICAL JOINTS IN FUNCTION-INTEGRATIVE TEXTILE REINFORCED THERMOPLASTIC COMPOSITESA.Winkler (Technische Universität Dresden) |
| 17.50 |
18.10 |
|
|
EFFECT OF ALN CONTENT ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF BN-BASED COMPOSITESZ.Tian (Harbin Institute Of Technology) |
|
| 18.10 |
18.30 |
|
|
|
|
