| Poster session |
| Applications |
| PREPARATION OF BI(PB)-SR-CA-CU-O SUPERCONDUCTOR WITH NANO CO3O4 ADDITIONN.J.Azman (University Kebangsaan Malaysia) |
| FABRICATION AND PHOTOCATALYTIC ACTIVITY OF TIO2 COMPOSITE PHOTOCATALYST FILM BY MECHANICAL COATING TECHNIQUE AND HIGH-TEMPERATURE OXIDATIONY.Lu (Chiba University) |
| USE OF BANANA FIBRE IN INJECTION ‐ MOULDED PARTS FOR THE AUTOMOTIVE SECTORL.Suárez (Universidad De Las Palmas De Gran Canaria) |
| INFLUENCE OF REINFORCEMENT GEOMETRY ON THE ELASTIC BEHAVIOUR OF PARTICLE-REINFORCED COMPOSITESJ.Toribio (University Of Salamanca) |
| INFLUENCE OF ADDITION POWDERS WITH DIFFERENT MORPHOLOGY TO MGB2 SUPERCONDUCTING CERAMICD.Batalu (Pollitehnica University Of Bucharest) |
| THICK CARBON FIBRE REINFORCED COMPOSITE MATERIALS: INVESTIGATION OF AN INDUSTRIAL CASE-STUDYL.Giorgini (University Of Bologna) |
| PREPARATION OF CROSSLINKED POLYVINYLPYRROLIDONE NANOCOMPOSITES AND INVESTIGATION OF THEIR ADSORPTION KINETICSG.Esiyok ukuser (Istanbul Kultur University) |
| RESONANT FATIGUE TESTING OF FULL-SCALE COMPOISTE HELICOPTER ROTOR BLADESY.J.Kee (Korea Aerospace Research Institute) |
| INNVIN - INNOVATIVE MATERIALS SOLUTIONS FOR TRANSPORT, ENERGY AND BIOMEDICAL SECTORS BY STRENGTHENING INTEGRATION AND ENHANCING RESEARCH DYNAMICS OF KMM-VIN |
| Ceramic Matrix Composites |
| STEEL FIBERS EFFECT IN BENDING AND COMPRESSIVE STRENGTH ENHANCEMENT OF GEOPOLYMER COMPOSITER.Polat (Atatürk University) |
| THE EFFECT OF PARAMETERS ON PHYSICAL AND STRENGTH PROPERTIES OF COMPOSITES WITH LOW CEMENT CASTABLEE.Karamian (Iaun) |
| Concrete and Cementitious composites |
| BOND BEHAVIOR OF GFRP BARS EMBEDDED IN FIBER REINFORCED CONCRETEJ.Lee (Sungkyunkwan University) |
| ANALYSIS OF FIBER-CONCRETE INTERFACE IN CEMENT MATRIX COMPOSITESR.Caratin (Ipen-cnen/sp) |
| PARTICLE REINFORCED POLYMER COMPOSITE'S STAIN RESISTANCE FACTORSA.Aruniit (Tallinn University Of Technology) |
| DETERMINATION OF MATERIAL PARAMETERS OF A TEXTILE REINFORCED CEMENTITIOUS COMPOSITE EXPOSED TO HIGH TEMPERATURES USING AN INVERSE METHODJ.Blom (Vrije Universiteit Brussel) |
| PULL-OUT MICRO-MECHANISM FOR FIBERS IN CONCRETEA.Krasnikovs (Riga Technical University) |
| NON LINEAR MICROMECHANICAL MODELLING OF HEMP CONCRETESS.Mom (Dalembert) |
| RETROFIT OF CONCRETE COLUMNS |
| NEW GFRP BARS AS INTERNAL REINFORCEMENT IN CONCRETE STRUCTURESA.I.Almerich (Universidad Politecnica De Valencia) |
| Damage and fracture |
| OFF-AXIS PROPERTIES OF WOVEN GFRP UNDER CONSTANT TENSILE LOAD IN HYDROTHERMAL ENVIRONMENTH.Kawada (Waseda University) |
| FRACTURE THOUGHNESS OF NANOMODIFIED EPOXY RESINS AND GLASS REINFORCED LAMINATESM.Santi (Università Degli Studi Di Padova) |
| INVESTIGATION OF IN-PLANE COMPRESSIVE BEHAVIOUR IN UNSYMMETRICAL COMPOSITE HONEYCOMB SANDWICH PANELSP.H.Nash (Loughborough University) |
| DAMAGE SENSING IN FIBRE-REINFORCED COMPOSITES USING CARBON NANOTUBE NETWORKS BY SPRAY COATINGH.Zhang (Queen Mary, University Of London) |
| ANALYSIS OF COMPOSITES WITH RIGID REINFORCEMENTS BY THE BOUNDARY ELEMENT METHODR.Gorski (Silesian University Of Technology) |
| Durability and ageing |
| SYNTHESIS AND CHARACTERIZATION OF TB DOPED SIO2 THIN FILM BY SOL-GEL PROCESS FOR PHOSPHORSK.J.Jeong (Changwon National University) |
| DURABILITY ANALYSIS OF MWNT NANOCOMPOSITES THROUGH DYNAMIC MECHANICAL TESTINGS.P.Zaoutsos (Technological Educational Institute Of Larissa) |
| DURABILITY OF POLYIMIDE TO TITANIUM BONDSM.Akram (Delft University Of Technology) |
| Health monitoring |
| APPLICATION OF ACOUSTIC NDT METHOD TO DETECT DAMAGE ON COMPOSITE STRUCTURESY.Ballesteros (Universidad Pontificia Comillas) |
| 3D DELAMINATION PATCH DETECTION IN LAMINATE COMPOSITES WITH AN NOVEL NDE TECHNIQUEY.Xu (Harbin Institute Of Technology Shenzhen Graduate School) |
| TEMPERATURE AND STRAIN EFFECTS DISCRIMINATION INTO COMPOSITE MATERIALS WITH EMBEDDED DUAL TYPE I-IA FIBRE BRAGG GRATINGSC.Chluda (Umons) |
| SHAPE ESTIMATION AND HEALTH MONITORING OF COMPOSITE WIND TURBINE BLADE USING DISTRIBUTED FBG SENSORSH.Bang (Korea Institute Of Energy Research) |
| INTEGRITY MONITORING OF COMPOSITE PATCH REPAIRS USING FIBER BRAGG GRATING SENSORSC.S.Shin (National Taiwan University) |
| Low cost technologies |
| A LOW COST FABRICATION ROUTE FOR CONTINUOUS CARBON FIBER REINFORCED ZRC-BASED COMPOSITES |
| Metal matrix composites |
| FABRICATION OF IN-SITU AL/TIC COMPOSITES IN LIQUID ALUMINUM BY THERMALLY ACTIVATED REACTION METHODJ.M.Lee (Korea Institute Of Materials Science ) |
| FABRICATION OF CNT-REINFORCED ALUMINUM MATRIX COMPOSITE ROD BY HYDROSTATIC EXTRUSION METHODG.S.Cho (Korea Institutue Of Industrial Technology) |
| FABRICATION OF NANO CABONS REINFORCED METAL MATRIX COMPOSITES BY LIQUID PRESSING PROCESSS.Lee (Korea Institute Of Materials Science) |
| WEAR CHARACTERIZATION OF CNF/AL COMPOSITES FABRICATED BY LIQUID PROCESSINGJ.H.Han (Chungnam National University) |
| GROWTH BEHAVIOR OF CU/AL INTERMETALLIC COMPOUNDS BY A MULTI-PASS OF HYDROSTATIC EXTRUSION |
| TENSILE PROPERTIES AND MICROSTRUCTURE OF SIC FIBRE REINFORCED MULTI METAL MATRIX COMPOSITESJ.Gussone (German Aerospace Center) |
| IN-SITU MANUFACTURING OF ALUMINUM-ALUMINUM NITRIDE CASTABLE NANOCOMPOSITE MATERIALSM.M.Makhlouf (Worcester Polytechnic Institute) |
| RECIPROCATING SLIDING SPEED EFFECT ON THE TRIBOLOGICAL PROPERTIES OF SICP REINFORCED NI MMCS DEPOSITED BY ELECTROPLATING H.GÜl (Duzce University) |
| EFFECT OF COPPER PARTICLE SIZE ON PROPERTIES OF CU-AL2O3 COMPOSITES I.Altinsoy (Sakarya University) |
| TURNING MACHINABILITY OF SHORT POTASSIUM TITANATE FIBER REINFORCED ALUMINUM ALLOY COMPOSITESK.Asano (Kinki University) |
| SELECTION OF PARAMETERS OF THE MANUFACTURING PROCESS OF COMPOSITES ALMMC / CF BY GPI ‐ COMPOSITION OF MATRIX ALLOYM.Dyzia (Silesian University Of Technology) |
| CONSOLIDATION AND PROPERTIES OF CU-TIC COMPOSITE BY REDUCTION SINTERING AND COLD EXTRUSION PROCESSH.L.Vu (Hanoi University Of Science And Technology) |
| SINTERING AND DIELECTRIC STUDIES OF TI DOPED AL-ZR OXIDE COMPOSITES |
| FORMATION OF MICROSTRUCTURE OF AL-CU-FE ALLOY WITH QUASICRYSTALLINE PHASES DURING MECHANICAL MILLINGP.Y.Bryantsev (National University Of Science And Technology "misis") |
| THIN FILM CARBON AND NITROGEN BASED NANOCOMPOSITES ON TI6AL4V ALLOYF.Cerny (Czech Technical University In Prague) |
| PREPARATION AND CHARACTERIZATION OF AN ALUMINUM DIBORIDE/ALUMINUM COMPOSITER.Orban (Eotvos Lorand University) |
| DIELECTRIC PROPERTIES OF CARBON BLACK COPOLYMERL.C.Costa (University Of Aveiro) |
| EFFECT OF HYBRID REINFORCEMENT ON CRACK INITIATION AND PROPAGATION MECHANISM IN METAL MATRIX COMPOSITES DURING LOW CYCLE FATIGUEA.A.Iqbal (Saitama University) |
| EFFECT OF SELECTED CASTING METHODS ON MICROSTRUCTURAL CHARACTERISTIC OF PARTICLE REINFORCED ALUMINIUM MATRIX COMPOSITESA.J.Dolata (Silesian University Of Technology) |
| Probabilistic approaches and design |
| EFFECTS OF MATRIX CRACKING ON THE ESTIMATION OF OPERATIONAL LIMITS OF FRP LAMINATESL.F.Sánchez-heres (Chalmers University Of Technology) |
| ADVANCED OPTIMIZATION OF COMPOSITE STRUCTURES INCORPORATING STRENGTH, DAMAGE, ROBUSTNESS & RELIABILITYK.Indermuehle (Dassault Systemes Simulia) |
| THE VIRTUAL TEST PIPELINE - CHARACTERISATION, GENERATION AND SIMULATION OF WOVEN TEXTILE COMPOSITES |
| PROBABILISTIC METHODS FOR THE ANALYSIS OF RANDOM STRESS AND STRAIN FIELDS IN 2D AND 3D MATRIX-INCLUSION COMPOSITES AND HIGH-POROUS BIOMATERIALS, BONES AND METALLIC FOAMSA.V.Kislitsyn (Perm National Research Polytechnic University) |
| Processing and manufacturing technologies |
| FORMABILITY EVALUATION OF NON-CRIMP CARBON FABRICSK.Kanazawa (Doshisha University) |
| EXPERIMENTAL DETERMINATION AND NUMERICAL MODELLING OF PROCESS INDUCED STRAINS AND RESIDUAL STRESSES IN THICK GLASS/EPOXY LAMINATEM.W.Nielsen (Technical University Of Denmark) |
| COMPUTATIONAL FLUID DYNAMICS SIMULATION FOR WIND PRESSURE OF COMPOSITE RADOME DURING INSTALLATION PROCESSL.L.Tong (Harbin Engineering University ) |
| MICROWAVE CURING OF LONG FIBRE REINFORCED COMPOSITED IN AN OPEN ANTENNA SYSTEM E.Diaz (Aimplas) |
| A NEW VACUUM INFUSION TECHNOLOGY: PULSE INFUSION V.Antonucci (Cnr) |
| Composite impact design |
| ON THE POTENTIAL OF FINE STEEL FIBRES TO CREATE STIFF BUT TOUGH POLYMER COMPOSITESY.Mosleh (Ku Leuven) |
| A NUMERICAL APPROACH FOR ANALYZING POST-IMPACT BEHAVIOR OF COMPOSITE LAMINATE UNDER IN-PLANE COMPRESSIONC.Chen (University Of Toulouse - Isae) |
| DISCRETE PLY MODELLING OF LOW VELOCITY IMPACT AND COMPRESSION AFTER IMPACT IN UNIDIRECTIONAL LAMINATED COMPOSITESS.Rivallant (Isae) |
| SIMULATION AND TESTING OF A POLYPROPYLENE-GLASS FIBRE REINFORCED COMPOSITE UNDER HIGH STRAIN RATE COMPRESSION LOADINGA.Martin (Ecole Centrale De Nantes) |
| Applications |
| SYNTHESIS OF FINE-DISPERSED YTTRIUM-ALUMINUM GARNET AL5Y3O12 VIA SOL-GEL TECHNIQUEN.T.Kuznetsov (N,s.kurnakov Institute Of General Fnd Injrganic Chemistry) |
| (THERMALLY INDUCED VIBRATION OF COMPOSITE FLEXIBLE SOLAR PANELS OF SATELLITE)S.M.Hamza-cherif (University Of Tlemcen ) |
| SYNTHESIS OF FINE-DISPERSED YTTRIUM-ALUMINUM GARNET AL5Y3O12 VIA SOL-GEL TECHNIQUEN.T.Kuznetsov (N,s.kurnakov Institute Of General Fnd Injrganic Chemistry) |
| (THERMALLY INDUCED VIBRATION OF COMPOSITE FLEXIBLE SOLAR PANELS OF SATELLITE)S.M.Hamza-cherif (University Of Tlemcen ) |
| COMPOSITE NANOFIBERS OF ELECTROACTIVE POLYMERS PREPARED VIA ELECTROSPINNINGN.J.Pinto (University Of Puerto Rico - Humacao) |
| POLYMER MODIFIED LOESS WITH IN-SITU POLYMERIZATION FOR REMOVING CATION DYESR.Wang (Norwest Normal University) |
| POLYURETHANE COMPOSITES WITH THE ADDITION OF GRAPHITE WITH DIFFERENT DEGREES OF EXPANSIONK.Pietrzak (Warsaw University Of Technology) |
| NANO CRYSTALLINE ZNO THIN FILMS REINFORCED WITH MWCNT BASED BUCKYPAPERS AS NEGATIVE ELECTRODES FOR LITHIUM ION BATTERIESM.O.Guler (Sakarya University) |
| (EFFECT OF SPEW GEOMETRY ON STRESS OF ADHESIVE JOINT FOR WIND TURBINE BLADE)Y.Ji (Pohang University Of Science And Technology) |
| MICROWAVE-ASSISTED HOMOPOLYMERIZATION OF EPOXY RESINS AND THEIR THERMAL PROPERTIESL.Zang (Karlsruhe Institute Of Technology (kit)) |
| IN-PLANE BEHAVIOUR OF TUFF MASONRY STRENGTHENED WITH INORGANIC MATRIX-GRID COMPOSITES IN DIAGONAL COMPRESSIONI.Iovinella (University Of Naples) |
| PRELIMINARY RESULTS OF AN EXPERIMENTAL AND COMPUTATIONAL ANALYSIS ON THE BEHAVIOR OF WEB-FLANGE JUNCTIONS OF GFRP PULTRUDED PROFILES SUBJECTED TO CONCENTRATED LOADSL.Feo (University Of Salerno) |
| IMPROVING MICRO-CT ACCURACY ON FEATURE EXTRACTION THROUGH IMAGE UPSCALINGL.Sorrentino (Università Degli Studi Federico Ii) |
| CHARACTERIZATION OF SHORT FIBER REINFORCED POLYPROPYLENE COMPOSITESM.Jerabek (Borealis Polyolefine Gmbh) |
| LAMINATE CHARACTERIZATION OF FIBER-REINFORCED POLYMER COMPOSITES BY MICRO-COMPUTED TOMOGRAPHY M.Mühlstädt (Friedrich-schiller-university) |
| Composites from renewable resources |
| NANO-SCALE PATTERNING OF COMPOSITE RESINS USING UV IMPRINTING TECHNIQUE |
| Durability and enviromental effects |
| INTERNAL STRAIN MEASUREMENT OF GLASS-POLYESTER COMPOSITES UNDER HYGRO-THERMAL AGEING TEST USING FIBER BRAGG GRATINGSF.Jacquemin (Universitè De Nantes) |
| INTRODUCTION OF RARE EARTH ELEMENTS TO REPLACE SILICON IN THE USUAL COMPOSITION OF ULTRA-HIGH-TEMPERATURE CERAMICSF.Rebillat (University Bordeaux 1) |
| EFFECT OF UPTAKE BEHAVIOUR ON TENSILE PROPERTIES OF FLAX FIBRE REINFORCED COMPOSITESJ.G.Moothoo (Laboratoire Prisme) |
| Fire behavior and fire retardance/resistance of polymer composites |
| FIREPROOF SILICONE SEALANTS FOR SHIPBUILDINGA.Borriello (National Research Council Of Italy) |
| Textile composites |
| DRAWING OF COMPOUND POLYMERIC FIBERSJ.I.Ramos (Universidad De Malaga) |
| EFFECT OF YARN NUMBER ON THE STRENGTH AND FAILURE ENVELOPES OF NON-CRIMP GLASS FIBER COMPOSITESK.Bilge (Sabanci University ) |
| TEXTILE BASED METAL SANDWICHES AND METAL-MATRIX-COMPOSITES REINFORCED WITH 3D WIRE STRUCTURES. PART II: JOINING TECHNOLOGY AND INTERFACE MODIFICATION FOR MMC S.Kaina (Tu Dresden) |
| Nanocomposites |
| MODELLING OF THE ELASTIC PROPERTIES OF NANOPARTICLE FILLED RESINSA.Pontefisso (University Of Padova) |
| Processing and manufacturing |
| FILAMENT WOUND PRODUCTS MADE WITH THERMOPLASTIC MATRIX TOWPREGSJ.F.Silva (Isep) |
| PROCESSING OF CONTINUOUS FIBRE REINFORCED THERMOPLASTICSJ.P.Nunes (Minho University) |
| INVESTIGATION OF THE STRENGTH AND FAILURE ENVELOPES OF NON-CRIMP GLASS FIBER REINFORCED THERMOPLASTIC COMPOSITES BASED ON IN-SITU POLYMERIZED CYCLIC OLIGOMERSG.Baser (Itu , Institute Of Science ) |
| A NEW METHOD FOR CONTINUOUS PRODUCTION OF RAMIE YARN REINFORCED COMPOSITES H.Kim (Yamaguchi University) |
| INFLUENCE OF MANUFACTURING PROCESS OVER MECHANICAL PROPERTIES OF DISCONTINUOUS CARBON/EPOXY COMPOSITES REALIZED BY INJECTION-TRANSFERT.Poumadère (Institut Clèment Ader) |
| EFFECT OF THICKNESS ON THE INTERFACIAL STRENGTH OF LAYER BY LAYER IN SITU UV CURINGI.Tena (Mondragon Unibertsitatea) |
| MICROWAVE CURING OF RTM PRODUCED POLYMER MATRIX COMPOSITESS.Maenz (Friedrich Schiller University Jena) |
| POLYESTER BASED NANOCOMPOSITES AS MATRIX FOR LIGHTWEIGHT REINFORCED COMPOSITESL.Sorrentino (Cnr ) |
| PREPARATION OF ORGANICALLY MODIFIED CACO3 AND ITS USE IN THE MANUFACTURE OF POLYPROPYLENE COMPOSITESS.Ozay (Marmara University) |
| Smart Materials & composite structures |
| EFFECTS OF THE CONFIGURATION OF THE SMA BASED FML ON MORPHING BEHAVIOUR |
| Health Monitoring |
| SHM APPLICATION ON SANDWICH PANELS WITH NOMEX HONEYCOMB CORE AND ALUMINIUM SKINS SUBJECTED TO LOW VELOCITY IMPACTSA.Manes (Politecnico Di Milano) |
| ESTIMATION OF THE PROBABILITY OF CRITICAL DAMAGE USING BAYESIAN THEOREM AT THE DELAMINATION IDENTIFICATION VIA THE EPCMA.Iwasaki (Gunma University) |
| INFLUENCE OF ABSORBED WATER IN CFRP LAMINATES ON EMBEDDED FBG SENSORSS.Takeda (Japan Aerospace Exploration Agency) |
| FLEXURAL BEHAVIOR OF SMART COMPOSITE MATERIALS - EFFECTS ON FBGS SIGNALSGS |
| INTERLAMINAR PHOTOELASTIC HEALTH MONITORING OF ADHESIVE JOINTS AND COMPOSITE STRUCTURES FOR EXTENDED ENDURANCE STRENGTH (INTERPHACE)C.Taudt (University Of Applied Sciences Zwickau) |
| Thermal methods for composite materials |
| FRACTAL DIMENSION NANOSTRUCTURE OF POINT ROBOT LASER HARDENED MATERIALS GGG 70 AND GGG 70 L M.Babič (Emo-orodjarna D.o.o.) |
