| Poster session |
| Applications |
| THE COVALENT GRAFTING OF ORGANIC AND BIOMOLECULES TO CARBON SURFACES USING AROMATIC DIAZONIUM SALTS AND PREPARATION OF ORGANO-MODIFIED CARBON COMPOSITE MATERIALSM.E.Trusova (National Reasearch Tomsk Polytechnic University) |
| Bio Based Composites |
| DEVELOPMENT OF BIO-BASED COMPOSITES FROM WASTE VEGETABLEST.Kimura (Kyoto Institute Of Technology) |
| PLA-NANOCOMPOSITE FILM FOR PACKAGING APPLICATIONS N.Jiratumnukul (Chulalongkorn University) |
| PREPARATION OF NANOCLAY REINFORCED HDPE/WOOD FLOUR FOAMES VIA INJECTION MOLDING A.V.Tabrizy (Islamic Azad University) |
| ELASTOMERIC NANOCOMPOSITES: POTENTIAL OF CHITIN AND CELLULOSE NANOCRYSTALS AS REINFORCING PHASEP.M.Visakh (Mahatma Gandhi University) |
| STUDY OF LIGNIN NANOPARTICLE-REINFORCED PHENOLIC COMPOSITE FOAMS FORMULATION USING AN EXPERIMENTAL DESIGNM.Oliet (University Complutense Of Madrid) |
| FORMATION AND CHARACTERIZATION OF SINGLE-LAYERED WOVEN ABACA/UNSATURATED POLYESTER COMPOSITEL.E.Polinga (University Of The Philippines) |
| EVALUATING THE INFLUENCE OF CHEMICAL MODIFICATION ON FLAX YARNR.Rajan (Tampere University Of Technology) |
| DEVELOPMENTS TOWARDS A MORE SUSTAINABLE ROTATIONAL MOULDING PROCESSZ.Ortega (Universidad De Las Palmas De Gran Canaria) |
| COMPLEX SHAPE FORMING OF A NEW GENERATION OF FLAX WOVEN AND NON-CRIMPED FABRICSP.Ouagne (University Orleans) |
| INFLUENCE OF DIFFERENT PROCESSING TECHNIQUES ON THE THERMAL PROPERTIES OF POLY(L-LACTIDE)/OLIVE STONE FLOUR COMPOSITESS.Perinović (Faculty Of Chemistry And Technology) |
| EFFECT OF ELECTRON BEAM IRRADIATION ON PROPERTIES OF POLY(LACTIC ACID) AND KENAF/POLY(LACTIC ACID) BIOCOMPOSITES IN THE PRESENCE OF TRIALLYL ISOCYANURATE AS MULTI-FUNCTIONAL MONOMERD.Cho (Kumoh National Institute Of Technology) |
| DEVELOPING OF MEDICAL MATERIALS ON THE BASIS OF BIOLOGICAL POLYMERSD.K.Garmaeva (North-easterm Federal University Named After M.k.ammosov) |
| A MOLECULAR MODELLING APPROACH FOR DESIGNING POLY(VINYL-ALCOHOL)-CHITOSAN MEMBRANES FOR CLINICAL USE WITH TAILORED TRANSPORT PROPERTIES |
| CHICKEN FEATHERS BASED COMPOSITES: A LIFE CYCLE ASSESSMENTG.Molins (Universitat Politecnica De Catalunya) |
| A STUDY ON THE OPEN HOLE TENSION OF THE UNIDIRECTIONAL FLAX YARN REINFORCED COMPOSITESK.B.Cheng (Feng Chia University) |
| RELEVANCE OF PROCESSING PARAMETERS AND STRUCTURE OF LAYERED SILICATE BIONANOCOMPOSITES ON THEIR FINAL APPLICATION PROPERTIES M.Iturrondobeitia (Euitib, University Of Basque Country, Bilbao, Spain) |
| PREPARATION AND PROPERTIES OF PLA NANOCOMPOSITES WITH INORGANIC NANOFILLERS AND CELLULOSE FIBRESK.Piekarska (The Centre Of Molecular And Macromolecular Studies Of Polish Academy Of Sciences ) |
| EXPERIMENTAL AND NUMERICAL CHARACTERIZATION OF COMPOSITE MATERIALS WITH LONG NATURAL JUTE FIBERSJ.L.Esteves (Inegi-institute Of Mechanical Engeneering And Industrial Management) |
| BIOPOLYETHYLENE/CURAUA FIBER COMPOSITES |
| COMPOSITES BASED ON RECYCLED POLY (ETHYLENE TEREPHTHALATE) (PET) AND SISAL |
| PHYSICO-MECHANICAL PROPERTIES AND DIMENSIONAL STABILITY OF NATURAL FIBRE COMPOSITES FABRICATED FROM POLYETHYLENE WASTE AND WALNUT SHELLSK.Salasinska (Warsaw University Of Technology) |
| INVESTIGATION ON MICROBIAL RESISTANCE OF POLYMER COMPOSITES CONTAINING LIGNOCELLULOSIC RAW MATERIALS J.Walentowska (Institute Of Natural Fibres ) |
| EFFECT OF ENZYMATIC TREATMENT ON TOXICITY OF LIGNOCELLULOSIC COMPOSITESJ.Batog (Institute Of Natural Fibres ) |
| MECHANICAL PROPERTIES OF WOVEN NATURAL FIBER REINFORCED COMPOSITESR.Sepe (A-technology S.p.a.) |
| MICROSTRUCTURAL ANALYSIS AND MECHANICAL BEHAVIOUR OF BAMBOO FIBRESL.Osorio (Katholieke Universiteit Leuven) |
| FABRICATION AND MECHANICAL PROPERTIES OF 3D JUTE FABRICS REINFORCED COMPOSITES J.Chen (Vanung University) |
| MECHANICAL BEHAVIOUR OF NATURAL FIBRE REINFORCED THERMOPLASTIC BRAIDED COMPOSITE RODSS.Parveen (University Of Minho, Campus De Azurem) |
| Ceramic matrix composites |
| A NEW PUSH-OUT PROCEDURE FOR THE EVALUATION OF INTERFACIAL PROPERTIES OF SIC/SIC COMPOSITESM.A.Herbreteau (Lcts) |
| TOWARD HIGH TEMPERATURE TOUGH CERAMICSI.Hussainova (Tallinn University Of Technology) |
| EFFECT OF CU POWDER ADDITION ON THERMOELECTRIC PROPERTIES OF CU/TIO2-X COMPOSITEK.Sagara (Chiba University) |
| PROCESSING GLASS-CERAMIC MATRIX COMPOSITES BY LIQUID MOULDING: CHARACTERISATION OF THE RHEOLOGY OF A RESIN DERIVED FROM A GEOPOLYMERIC SYSTEMA.Farrugia (Institut Clement Ader) |
| MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF ALUMINA-BASED COMPOSITES (ZTA) FOR INDUSTRIAL PRODUCTIONC.Rabache (Ecole Centrale De Paris) |
| MICROSTRUCTURE AND ELECTROCONDUCTIVITY OF TIN-AL2O3 COMPOSITES PREPARED BY HOT-PRESSING Z.H.Yang (Harbin Institute Of Technology ) |
| EFFECT OF H-BN ON THE MECHANICAL AND DIELECTRIC PROPERTIES OF POROUS H-BN/SI3N4 COMPOSITE CERAMICS PREPARED BY GEL CASTINGJ.S.Wang (Harbin Institute Of Technology) |
| EFFECT OF NUCLEATION TEMPERATURE AND TIME ON CRYSTALLIZATION BEHAVIOR OF ZIRCONIA/ ZIRCON ADDED BOROSILICATE GLASS M.Hasanuzzaman (Dublin City University) |
| PIEZEOELCTRIC-POLYMER COMPOSITES PROCESSED BY INK-JET PRINTING TECHNOLOGYD.Kuscer (Jozef Stefan Institute) |
| HIGH STRAIN RESPONSE AND DEFORMATION MECHANISMS IN KINKING NONLINEAR ELASTIC SOLIDS: MN+1AXN PHASE TERNARY CERAMICSN.C.Goulbourne (University Of Michigan) |
| Damage and fracture |
| FATIGUE PROPERTIES OF THE CELL 3D COMPOSITE STRUCTURE BY TENSION AND SHEAR LOADINGJ.Had (Ctu In Prague) |
| DELAMINATION STUDYING IN POLYMER COMPOSITES REINFORCED BY GLASS FIBER IN BALLISTIC IMPACTM.J.Khoshgoftar (Tarbiat Modares University) |
| Durability and ageing |
| DURABILITY ANALYSIS PROCESS FOR VULCANIZED RUBBER COMPONENTC.S.Woo (Korea Institute Of Machinery ) |
| Hybrid composites |
| INTERFACE CHARGE TRANSFER IN POLYPYRROLE COATED LSMO MAGNETIC NANOPARTICLESO.Pana (Natl. Inst. For Isotopic And Molec. Technol.) |
| MECHANICAL AND DEVELOPMENT PROPERTIES OF SINTERED COPPER-ALUMINA COMPOSITE MATERIALS FROM MECHANICALLY ALLOYED POWDERS J.W.Kaczmar (Politechnika WrocÅ,awska) |
| CHARACTERISTICS OF THE CERAMIC SHEET HYBRID BIOCOMPOSITEY.J.Yoo (Korea Institute Of Energy Reseach) |
| PROPERTIES OF THERMOPLASTIC FIBRE METAL LAMINATES (FML)K.Schulze (Dlr) |
| THE MECHANICAL PROPERTIES AND FAILURE ANALYSIS OF SELECTED FIBRE METAL LAMINATESJ.Bieniaś (Lublin University Of Technology) |
| PREPARATION AND ANTIBACTERIAL PROPERTIES OF ORGANIC-INORGANIC POLYMER HYBRIDS USING NANO-TIO2B.G.Min (Kumoh National Institute Of Technology) |
| MORPHOLOGY AND MECHANICAL PROPERTIES OF URETHANE LINK POLYDIMETHYLSILOXANE/PERLITE MICROSPHERE COMPOSITESM.Y.Jo (Inha University) |
| HARD TISSUE FORMATION IN SPONGES BY BONE MARROW CELLS SUSPENDED IN AN ALGINATE GEL |
| POLYOLEFINS - POLYHEDRAL OLIGOMERIC SILSESQUIOXANES (POSS) NANOCOMPOSITES: MECHANICAL PROPERTIES, MORPHOLOGY AND THERMAL BEHAVIOURM.Grala (Centre Of Molecular And Macromolecular Studies Polish Academy Of Sciences) |
| Interfaces and interphases |
| SURFACE MODIFICATION OF POLYESTER FILM BY SILANE TREATMENT FOR INORGANIC LAYER ADHESION IMPROVEMENTA.Cammarano (Imast) |
| MICROSTRUCTURE AND BONDING STRENGTH OF CARBON NANOTUBES DIRECTLY GROWN ON CARBON FIBER SUBSTRATEK.Kim (Seoul National University) |
| FROM POLYMERIZATION WASTES TO INTERFACIAL AGENTS: ATACTIC POLYPROPYLENE BASED ADDITIVES AS INTERFACIAL MODIFIERS IN MULTIPHASE MATERIALS BASED ON POLYPROPYLENEJ.M.Garcia-martinez (Ictp/csic) |
| STUDY OF THE INJECTION FLOW OF GLASS FIBER REINFORCED PBT AND ITS INFLUENCE ON THE SURFACE ROUGHNESS OF THE INJECTED PARTS AND THE STEEL MOLD WALLSI.J.Martinez-mateo (Universidad Politecnica De Cartagena) |
| ESTIMATION OF INTERFACIAL PROPERTIES OF VARIOUS CARBON FIBER EPOXY COMPOSITES USING MOLECULAR MODELLING AND SIMULATIONSI.Sadiq (Beihang University) |
| MICROSTRUCTURE OF THE MAGNESIUM ALLOY ZRE1-GLASSY CARBON COMPOSITE INTERFACE |
| EFFECT OF THE COUPLING AGENT ON THE ADHESION OF PHASES IN CERAMIC-ELASTOMER COMPOSITESITLEP.Chabera (Warsaw University Of Technology) |
| Joint and bearing behaviour |
| DEVELOPMENT AND MECHANICAL PROPERTIES OF OPEN-HOLED CFRP WITH NON-CUT FIBERSJ.Noda (Yamaguchi University) |
| Life cycle analysis and sustainability |
| MULTIPLE CRITERIA DECISION MAKING INTEGRATED WITH MECHANICAL MODELING OF DRAPING FOR MATERIAL SELECTION OF TEXTILE COMPOSITESA.Mosavi (University Of Debrecen, Faculty Of Informatics ) |
| Multifunctional composites |
| PCM USING PARAFFIN/EXFOLIATED GRAPHITE COMPOSITES AS ENERGY SAVING BUILDING MATERIALS FOR THERMAL COMFORTS.Kim (Soongsil University) |
| MULTIFERROIC BEHAVIOR ON SYMMETRIC AND NONSYMMETRIC HETEROSTRUCTURES BASED ON PB(ZR0.2 TI0.8)O3 - COFE2O4C.Dragoi (National Institute Of Materials Physics) |
| FUNCTIONALIZED GRAPHENE STABLY DISPERSIBLE IN WATER AND POLY(VINYL ALCOHOL) |
| Multiscale modelling |
| NANOSTRUCTURED FLUORO-CARBIDE (CFX) THIN FILMS: DEPOSITION GUIDED BY AN ORIGINAL THORETICAL CONCEPTG.K.Gueorguiev (Linkoping University) |
| MULTISCALE MODELING OF SHORT-FIBER REINFORCED COMPOSITESV.Müller (Karlruhe Intitute Of Technology) |
| THE INFLUENCE OF MORPHOLOGY AND TOPOLOGY OF REINFORCEMENTS ON THERMO-ELASTIC PROPERTIES OF COMPOSITES: APPLICATION TO ELECTRONIC COMPONENTSS.Ben khlifa (Ecole Nationale D Ingenieurs De Metz (enim)) |
| MODELING OF THE ELASTIC RESPONSE AND STRUCTURAL OPTIMIZATION OF CARBON/CARBON COMPOSITESR.Piat (Karlsruhe Institute Of Technology) |
| NUMERICAL CHARACTERIZATION OF RANDOM GLASS FIBRE COMPOSITE MATERIALI.Ioannou (University Of Sheffield) |
| Nanocomposites |
| IN-SITU MONITORING OF THE CURING OF POLYSILOXANE/ORGANOCLAY NANOCOMPOSITES, BASED ON ADDITION TYPE ELASTOMERSS.P.Vasilakos (Ntua) |
| FRACTAL ANALYSIS OF SURFACES COMPRISING HIERARCHICAL STRUCTURESA.A.Ponomareva (Etu) |
| STRUCTURAL AND MORPHOLOGICAL STUDIES OF CNT/TIO2 NANOCOMPOSITE FOR DYE-SENSITIZED SOLAR CELL APPLICATION H.Abdullah (Universiti Kebangsaan Malaysia ) |
| FACILE PREPARATION OF POLYMER-GRAPHITE NANOSHEETS COMPOSITES WITH HIGH DIELECTRIC CONSTANT AND LOW LOSS FACTOR |
| RELATIONSHIPS BETWEEN ELECTRICAL, MECHANICAL PROPERTIES AND MORPHOLOGY OF PC/CNT COMPOSITESS.G.Pardo (University Of A Coruna) |
| STRUCTURE, ELASTIC AND ELECTRICAL PROPERTIES OF POLYETHYLENE (PE) / CARBON NANOTUBE (CNT) NANOCOMPOSITESJ.Zicans (Riga Technical University) |
| THE PROPERTIES OF BUTADIENE-ACRYLONITRILE RUBBER NBR FILLED WITH MODIFIED LAYERED FILLERSM.Lipinska (Technical University Of Lodz) |
| STUDIES ON MAGNETITE AND SEMICONDUCTORS BASED CORE-SHELL NANOPARTICLESM.V.Stefan (National Institute For Research And Development Of Isotopic And Molecular Technologies) |
| SYNTHESIS, CHARACTERIZATION, AND PROTEIN IMMOBILIZATION STUDY OF PHEMA GRAFTED HYDROXYAPATITE NANOCRYSTALS VIA SURFACE INITIATED RADICAL POLYMERIZATIONL.G.Bach (Pukyong National University) |
| FEW LAYER GRAPHENES DECORATED WITH SILVER NANOPARTICLES C.Trapalis (Ncsr Demokritos) |
| PHOTODEGRADATION AND CHARACTERIZATION OF POLY(ETHYLENE OXIDE) / MONTMORILLONITE COMPOSITE FILMS.P.C.Lombardo (Universidade De Sao Paulo) |
| SILICONE RESINS FILLED WITH ALUMINA NANOPARTICLES FOR IMPREGNATION OF ELECTRICAL MOTORS E.Amendola (Cnr-italy's National Council Of Research) |
| NANOMODIFIED MATERIAL TO ORTHESIS MANUFACTURINGM.G.Carvalho (Ufmg) |
| ELECTRON TRANSPORT INSIDE NANOPOROUS ZNO-BASED DYE-SENSITIZED SOLAR CELLH.Abdullah (Universiti Kebangsaan Malaysia) |
| STUDY ON CORROSION PROTECTION AND CONDUCTIVE NANOCOMPOSITE LAYERS (EPOXY RESIN/ MWCNTS) BASED DIP-COATING ON MG ALLOY AM50Y.Jung (Cho-nbuk National University) |
| PREPARATION AND APPLICABILITY OF EVOH/TIO2 NANOCOMPOSITES PREPARED BY SIMPLE SAPONIFICATION METHODM.Y.Jo (Inha University) |
| SUPERCAPACITANCE OF SINGLE-WALLED CARBON NANOTUBE-POLYANILINE COMPOSITESA.Pruna (Universidad Politecnica De Valencia, Spain) |
| IN-SITU SENSING OF ELASTIC AND PLASTIC DEFORMATION BEHAVIOR IN EPOXY-BASED STRAIN SENSOR USING VERTICALLY ALIGNED CARBON NANOTUBE GROWN ON SICW.Li (Ecole Centrle De Paris) |
| HOW DO NANOPARTICLES INFLUENCE ON PHYSICAL-MECHANICAL PROPERTIES OF CARBON FIBERS |
| DEVELOPMENT OF NANOCLAY REINFORCED PA6/HDPE NANOCOMPOSITESH.Hargitai (Széchenyi István Universityy) |
| FABRICATION AND EVALUATION OF CARBON NANOTUBE/ALUMINA COMPOSITES BY PERCURSOR METHODK.Shirasu (Tohoku University) |
| CNT-AL METAL MATRIX NANOCOMPOSITESS.Simões (Cemuc) |
| ELECTRICAL, AND DYNAMIC MECHANICAL PROPERTIES OF MWCNTS/EPOXY COMPOSITE FOR HIGH PERFORMANCE AEROSPACE APPLICATIONSM.Raimondo (Università Di Salerno) |
| ON THE EFFECT OF NON-COVALENT INTERACTIONS OVER THE DISPERSION STATE OF CARBON NANOTUBES IN EPOXY RESINS: FROM SUSPENSIONS TO CURED EPOXY/CNT NANOCOMPOSITESS.C.Schulz (Technical University Hamburg-harburg) |
| APPLICATION OF CARBON NANOTUBES AND NEWLY DEVELOPED COUPLING AGENTS IN DIFFERENT POLYMERIC MATERIALS |
| NANOCOMPOSITES BASED ON POLY(VINYL ALCOHOL)/MULTI-WALLED CARBON NANOTUBES FOR POTENTIAL APPLICATION AS BIOMATERIALSJ.C.Cruz santos (Ufmg) |
| EFFECT OF CNT ON THE MECHANICAL PROPERTIES OF MELT SPUN PET/CNT NANOCOMPOSITE FIBERSS.A.Furquan (King Fahd University Of Petroleum And Minerals) |
| COMPOSITES BASED ON NANOSIZED HIGHLY EXFOLIATED GRAPHITEE.D.Grayfer (Nikolaev Institute Of Inorganic Chemistry, Siberian Branch Of Russian Academy Of Sciences) |
| PERCOLATION PHENOMENA OF MODIFIED EXPANDED GRAPHITES IN TPU AND PP COMPOSITESJ.Pionteck (Leibniz Institute Of Polymer Research Dresden) |
| EFFECTS OF REDUCTION AND SIZE OF GRAPHENE ON MECHANICAL AND ELECTRICAL PROPERTIES OF GRAPHENE OXIDE PAPERSJ.K.Kim (Hong Kong University Of Science And Technology) |
| GRAPHENE-WRAPPED ELECTROCONDUCTIVE HYBRID SPHERESS.Lee (Kist) |
| IN-PLANE SHEAR PROPERTIES OF MULTISCALE HYBRID F-MWCNTS / LONG CARBON FIBRES / EPOXY LAMINATESG.Vargas (University Of The Basque Country) |
| THE ROLE OF SILICON DOPED CARBON POWDER ON THE FORMATION ß-SIC WHISKERS NANO SIZED IN SILICON-CARBON-RESOLE COMPOSITE MATERIALSH.Amini (Islamic Azad University ) |
| VISCOELASTIC PROPERTIES OF BIODEGRADABLE CELLULOSE DIACETATE NANOCOMPOSITES CONTAINING SILICA NANOPARTICLE SURFACE-MODIFIED WITH CELLULOSE ACETATE BUTYRATE M.Aliakbarnia (Islamic Azad Univ.science And Research Branch) |
| FINITE ELEMENT PREDICTION OF MECHANICAL PROPERTIES OF PLAIN WEAVE CARBON FABRIC AND CARBON NANOTUBES REINFORCED NANOCOMPOSITEJ.Song (Changwon National University) |
| Polymer matrix composites |
| CRYOGENIC THERMAL EXPANSION AND MECHANICAL PROPERTIES OF EPOXY RESIN MODIFIED WITH POLYDIMETHYLSILOXANEJ.W.Yi (Korea Institute Of Materials Science(kims)) |
| Repair technologies |
| STRUCTURAL TESTING AND REPAIR PROCEDURE OF FIBERGLASS COMPOSITE SECTIONS PRODUCED BY HAND LAYUP METHODA.Hassani baygi (Imperial College London) |
| Multiferroic-magnetoelectric composites |
| FAST SINTERED BIFEO3 SINGLE-PHASED CERAMICSG.S.Dias (Universidade Estadual De Maringa) |
| HR-TEM INVESTIGATIONS IN ADVANCED BIFEO3-PBTIO3 MULTIFERROIC MULTIFUNCTIONAL CERAMICSL.G.Silveira (Universidade Estadual De Maringà) |
| Thermal methods for composite materials |
| EFFECT OF FILLER TREATMENT ON THE THERMAL PROPERTIES OF COMPOSITES AND POLYMER BLENDSE.Govorcin bajsic (Faculty Of Chemical Engineering And Technology) |
| High performance matrices for structural composites |
| NANOCOMPOSITES BASED ON MULTICOMPONENT POLYMER MATRIX AND ARTIFICIAL DIAMOND NANOFILLERL.V.Karabanova (Institute Of Macromoleculare Chemistry Of Nas Of Ukraine) |
| SYNTHESIS OF A NEW BENZOXAZINE MONOMER FOR MMT/POLYBENZOXAZINES NANOCOMPOSITESC.Andronescu (University Politehnica Of Bucharest) |
