|
MEZZALUNA |
MOSAICI 1 |
MOSAICI 2 |
TOM HANKS |
|
Session Th1.11 |
Session Th1.12 |
Session Th1.13 |
Session Th1.14 |
|
G.S. Nanocomposites: Applications |
T.S. Metal matrix composites |
G.S. Damage and fracture 7: mixed-mode loading |
G.S. Hygrothermal durability and ageing |
| 8.30 |
8.50 |
TOUGHENING POLYETHYLENE BY EXFOLIATED NATURAL CLAY NANOSHEETS D.Cai (Loughborough University ) |
ULTRASONIC STIRRING AS PRODUCTION PROCESS FOR NANOPARTICLE REINFORCED MAGNESIUM ALLOYS AND COMPRESSION CREEP RESPONSE OF ZE10 REINFORCED WITH CERIA NANOPARTICLESH.Dieringa (Helmholtz-zentrum Geesthacht) |
MODE-MIXITY IN BEAM-LIKE GEOMETRIES: LINEAR ELASTIC CASES AND LOCAL PARTITIONINGM.Conroy (University College Dublin) |
DURABILITY OF CFRP-CONCRETE BONDING IN A MARINE ENVIRONMENTM.Long (Laboratoire Genie Civil Et Geo-environnement (lgcge), Iut De BEthune) |
| 8.50 |
9.10 |
EPOXY NANOCOMPOSITE ADHESIVESA.Pegoretti (University Of Trento) |
AN INFLUENCE OF SIC CONTENT AT AL (ALMG) MATRIX COMPOSITES ON CREEP CHARACTERISTICSK.Makowska (Motor Transport Institute ) |
TESTING OF CARBON/EPOXY NCF STRENGTH UNDER MIXED IN-PLANE LOADINGR.Olsson (Swerea Sicomp Ab) |
WATER DIFFUSION IN COMPOSITE MATERIALS - INTERFACIAL PHENOMENA: EXPERIMENTAL, ANALYTICAL AND NUMERICAL APPROACHY.Joliff (Mapiem - Isitv) |
| 9.10 |
9.30 |
CONDUCTIVE STRUCTURAL ADHESIVE WITH LOW THERMAL EXPANSION COEFFICIENT FOR AEROSPACE APPLICATIONSS.V.Hoa (Concordia University) |
OXIDE-REINFORCED COMPOSITES WITH INTERMETALLIC MATRIX BASED ON NICKEL AND TITANIUM MONOALUMINIDESK.B.Povarova (A.a.baikov Institute Of Metallurgy And Matirials Science, Russian Academy Of Science) |
EVALUATION OF MODE I AND MODE II INTERFACIAL FRACTURE TOUGHNESS AND MATRIX TOUGHNESS IN FRP BY USING REAL-SIZE MODEL COMPOSITESK.Koiwa (Kobe University) |
MODELING CHALLENGES IN CYCLIC HYDROTHERMAL AGING OF AIRCRAFT LIGHTNING PROTECTIONSG.Lubineau (Cohmas/kaust) |
| 9.30 |
9.50 |
CONFINED POLYMERIC NANOWIRES INTO POROUS ALUMINA MATRIX AS COMPOSITE PIEZOELECTRIC MEMBRANE FOR SENSING APPLICATIONSV.Cauda (Italian Institute Of Technology) |
CREEP BEHAVIOR OF METAL MATRIX HEAT RESISTANT COMPOSITES REINFORCED WITH OXIDE FIBRESS.T.Mileiko (Institute Of Solid State Physics) |
AN EXPERIMENTAL INVESTIGATION OF MIXED-MODE TRANSLAMINAR FRACTURE OF CFRPM.J.Laffan (Imperial College London) |
THE EFFECTS OF MOISTURE AND PHYSICAL AGEING ON THE VICOELASTIC BEHAVIOUR OF A STRUCTURAL EPOXYR.M.Guedes (Inegi-instituto De Engenharia Mecanica E Gest. Industrial ) |
| 9.50 |
10.10 |
|
TEXTILE BASED METAL SANDWICHES AND METAL-MATRIX-COMPOSITES REINFORCED WITH 3D WIRE STRUCTURES. PART I: DEVELOPMENT AND REALISATION OF CELLULAR 3D WIRE STRUCTURESC.Sennewald (Tu Dresden) |
STUDY AND ANALYSIS OF MIXED MODE (I + II) CRACK PROPAGATION MECHANISMS OF 3D REINFORCED COMPOSITES ASSEMBLIES M.Stackler (Universitè De Technologie De Compiègne) |
THE LONG-TERM WATER ABSORPTION AND DESORPTION BEHAVIOUR OF CARBON-FIBRE / EPOXY COMPOSITESC.Arnold (Swansea University) |
| 10.10 |
10.30 |
|
|
PREDICTION OF CRACK PROPAGATION IN SANDWICH BEAMS UNDER FLEXURAL LOADING E.E.Theotokoglou (National Technical University Of Athens) |
|
| 10.30 |
11.15 |
PLenary Lecture 4: Lightweight Construction In Automotive : The Lamborghini Aventador
Luciano De Oto (Lamborghini)
Palazzo del Cinema |
|
Session Th2.11 |
Session Th2.12 |
Session Th2.13 |
Session Th2.14 |
|
G.S. Nanocomposites: Synthesis and functionalization 1 |
T.S. Metal matrix composites |
G.S. Damage and fracture 8: fatigue loading |
G.S. Estimation of durability and ageing |
| 11.20 |
11.40 |
MICROWAVE ASSIST FUNCTIONALIZATION OF MULTI WALLED CARBON NANOTUBESG.W.Lebrão (Ceun Imt / Ipen) |
DEVELOPMENT AND CHARACTERIZATION OF A 2024 ALUMINIUM ALLOY REINFORCED WITH TIC PARTICULATES PRODUCED BY SHSP.Egizabal (Fundfacion Tecnalia) |
DAMAGE EVOLUTION UNDER BENDING FATIGUE IN CROSS-PLY COMPOSITE LAMINATESC.A.Favela-gallegos (The University Of Sheffield) |
EXPERIMENTAL INVESTIGATION AND MODELING OF NONLINEAR VISCOELASTIC PLASTIC BEHAVIOR OF POLYIMIDEA.Aniskevich (Institute Of Polymer Mechanics, University Of Latvia) |
| 11.40 |
12.00 |
FROM POLYMER BLENDS TO NANOFIBRILLAR POLYMER-POLYMER AND SINGLE POLYMER COMPOSITESS.Fakirov (The University Of Auckland) |
INFLUENCE OF CONTENT AND PARTICLE SIZE ON PROPERTIES OF TIC REINFORCED 7075 ALUMINIUM MATRIX COMPOSITEP.Rey (Aimen Technology Centre) |
EFFECT OF DRILLING PROCESSES ON THE MECHANICAL BEHAVIOUR OF CFRP COMPOSITE PLATES M.Saleem (Ryerson University ) |
INVESTIGATION OF SUBCRITICAL CRACK GROWTH IN GLASS FIBERS USING LOAD RELAXATION TESTS ON BUNDLESJ.L.Lamon (Cnrs) |
| 12.00 |
12.20 |
ENZYME IMMOBILIZATION ON POLYMERIC NANOPARTICLES AS A TOOL TO IMPROVE BIOCATALYTIC PERFORMANCE L.Chronopoulou (University Of Rome La Sapienza) |
COMPRESSIVE FAILURE OF ALUMINUM MATRIX COMPOSITE REINFORCED WITH GRAPHITE FIBERSD.L.Sun (Harbin Institute Of Technology) |
DAMAGE ANALYSIS OF AL(MG)/SIC COMPOSITES UNDER FATIGUE CONDITIONSA.Rutecka (Institute Of Fundamental Technological Research Of The Polish Academy Of Sciences) |
FINITE ELEMENT MODELLING OF MOISTURE UPTAKE IN CARBON FIBRE / EPOXY COMPOSITES: A MULTI-SCALE APPROACHS.M.Alston (Swansea University) |
| 12.20 |
12.40 |
(A COMPARATIVE STUDY OF SOLVENT VAPOUR BARRIER PROPERTIES OF POLYMER FILMS BY CONDUCTIVE POLYMER COMPOSITE SENSOR)S.K.Kumar (University Of Sud Brittany,lorient,france) |
STRUCTURAL EVOLUTION OF STEEL-BASED MMC BY HIGH ENERGY X-RAY DIFFRACTION AND MICROMECHANICAL APPROACHG.Geandier (Institut Jean L:amour) |
FATIGUE DIAGNOSIS IN COMPOSITES- A ROBUST BAYESIAN APPROACHJ.Chiachio (University Of Granada) |
INFLUENCE OF INJECTION MOLDING PROCESS PARAMETERS ON FATIGUE PERFORMANCE OF SHORT GLASS FIBER REINFORCED POLYAMIDEP.K.Mallick (University Of Michigan-dearborn) |
| 12.40 |
13.00 |
SYNTHESIS OF THERMOPLASTIC/THERMOSET HYBRID SYSTEMS FOR THE PREPARATION OF CLAY NANOCOMPOSITES BASED ON UNSATURATED POLYESTER RESINSS.Chaeichian (Concordia University) |
MECHANICALLY ALLOYED COMPOSITE MATERIALS BASED ON DUMPING WASTE WITH COMPLEX COMPOSITIONM.E.Samoshina (National University Of Science And Technology "misis") |
A NEW STRENGTH SIMULATION METHOD CONSIDERING IN-SITU PROPERTY FOR MULTIDIRECTIONAL LAMIANTE UNDER TENSILE LOADINGW.Lian (Commercial Aircraft Corporation Of China) |
|
| 14.15 |
14.45 |
|
|
|
|
|
Session Th3.11 |
Session Th3.12 |
Session Th3.13 |
Session Th3.14 |
|
G.S. Nanocomposites: Synthesis and functionalization 2 |
T.S. Metal matrix composites |
G.S. Damage and fracture 9: damage monitoring |
G.S. Durability and ageing |
| 14.50 |
15.10 |
PREPARATION OF POLY (VINYLALCOHOL)/ORGANOCLAY NANOCOMPOSITES BY CASTING AND IN SITU POLYMERIZATIONE.Erdmann (Itba) |
HIGH TEMPERATURE FORMABILITY OF IN-SITU AL-TIC COMPOSITES.Kim (Korea Institute Of Materials Science) |
NONLINEAR VIBRO-ACOUSTIC WAVE MODULATIONS FOR IMPACT DAMAGE DETECTION IN COMPOSITES A.Klepka (Agh University Of Science And Technology) |
APPLICATION OF ISOCONVERSIONAL KINETICS FOR PREDICTION OF THE LIFETIME OF ORGANIC MATERIALS: SIMULATION OF THE AGING OF RUBBERM.Hartmann (Akts Ag) |
| 15.10 |
15.30 |
NEW ETFE NANOCOMPOSITES BASED ON FLUORO-MODIFIED NANOCLAYSR.Bertani (Uni Pd) |
FABRICATION CONDITIONS OF CARBON FIBER ALUMINUM COMPOSITES BY LOW PRESSURE INFILTRATION.G.Sasaki (Hiroshima University) |
DAMAGE DETECTION IN COMPOSITE PLATES USING FIBER BRAGG GRATINGSF.F.Melemez (Sabanci University) |
STUDY ON DIMENSIONAL STABILITY OF SICP/AL COMPOSITEQ.Wang (Harbin Institute Of Technology) |
| 15.30 |
15.50 |
EXPERIMENTAL ANALYSIS OF THE FILTRATION OF PARTICLES DURING THE LIQUID COMPOSITE MOLDING PROCESS USING AN ELECTRON PROBE MICRO ANALYZERS.H.Yeom (Seoul National University) |
EFFECT OF RECIPROCATING SLIDING SPEED ON THE TRIBOLOGICAL PERFORMANCE OF NANO AL2O3 REINFORCED NI MMCS PRODUCED BY DC AND PULSE ELECTRO CO-DEPOSITIONSA.Alp (Sakarya University) |
MONITORING THE DISBONDING OF A CFRP PLATE-BONDED REINFORCEMENT OF A STRUCTURAL BEAM USING A CHIRPED FBG SENSORA.R.Sanderson (University Of Surrey) |
BFRP: QUALIFICATION AND CONTROL TESTR.Invernizzi (Enea-italian National Agency For New Technologies,energy And Sustainable Economic Development) |
| 15.50 |
16.10 |
NI/C/SIO2 NANOSTRUCTURED COMPOSITES SYNTHESIZED BY CARBONIZATION OF CARBOXYMETHYL CELLULOSE.P.Enoksson (Chalmers University Of Technology) |
EFFECT OF REINFORCEMENT CONTENT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF IN SITU (TIBW+TICP)/(TI-4.0FE-7.3MO-5.2CR ) COMPOSITESR.Zhou (Harbin Institute Of Technology) |
ACOUSTIC EMISSION ANALYSIS FOR QUANTITATIVE CHARACTERISATION OF THE DAMAGE BEHAVIOUR IN FIBRE REINFORCED COMPOSITES UNDER STATIC AND DYNAMIC LOADINGM.Kempf (University Of Bayreuth) |
CREEP AND DURABILITY OF POLYMER BASED GEOGRID COMPOSITESS.Alexeeva (Institute Of Machines Science Of Ras) |
| 16.10 |
16.30 |
BIOINSPIRED CLAY NANOCOMPOSITES OF VERY HIGH CLAY CONTENTL.A.Berglund (Kth) |
CREEP BEHAVIOUR AND MICROSTRUCTURAL CHANGES IN AN ELECTRODEPOSITED PARTICLE-REINFORCED NICKEL-BASED NANOCOMPOSITEV.Sklenicka (Institute Of Physics Of Materials As Cr,v.v.i.) |
QUANTIFICATION OF CARBON FIBRE/EPOXY RESIN COMPOSITE FAILURE PROCESSES USING SYNCHROTRON RADIATION COMPUTED TOMOGRAPHYH.Morton (University Of Southampton) |
|
| 16.30 |
16.50 |
ELECTROSPUN PLA/PCL/MPS NANOFIBROUS HYBRID COMPOSITE STRUCTURES FOR SUSTAINED DRUG RELEASEY.Dong (Curtin University) |
|
MICROSTRUCTURES AND DEFORMATION MICROMECHANISMS IN DEFORMED BUNDLE OF FIBERSP.Latil |
|
|
|
Session Th4.11 |
Session Th4.12 |
Session Th4.13 |
Session Th4.14 |
|
|
|
G.S. Metal matrix composites |
G.S. Damage and fracture 10: debonding and fracture |
|
| 16.50 |
17.10 |
|
INVESTIGATION OF THE MECHANICAL BEHAVIOUR OF METAL-DIAMOND COMPOSITESL.Peroni (Politecnico Di Torino) |
INFLUENCE OF MESOSCOPIC FOAM STRUCTURE ON FACE SHEET DEBONDING IN CFRP FOAM CORE SANDWICH PANELSR.Schlimper (Fraunhofer Institute For Mechanics Of Materials Iwm) |
|
| 17.10 |
17.30 |
|
NUMERICAL SIMULATION OF HEAT AND MASS TRANSFER DURING HIGH SPEED LIQUID ROUTE PROCESSING OF TITANIUM MATRIX COMPOSITESC.Arvieu (UniversitE Bordeaux1 ) |
INVESTIGATING THE DAMAGE-TOLERANT DESIGN OF STIFFENER RUN-OUTSS.Psarras (Imperial College) |
|
| 17.30 |
17.50 |
|
WEAR MECHANISMS OF BRONZE MATRIX COMPOSITES REINFORCED WITH CORE SHELL NI COATED AL2O3 PARTICLES PRODUCED BY RAPID CURRENT SINTERING TECHNIQUEM.Uysal (Sakarya University ) |
DYNAMIC FRACTURE IN CFRP PANELS UNDER COMPRESSIVE LOADINGJ.Ankersen (Imperial College London) |
|
| 17.50 |
18.10 |
|
CARBON NANOTUBES - REINFORCED ALUMINIUM WITH IMPROVED YIELD STRENGTH AND TOUGHNESSS.Marchisio (Politecnico Di Torino) |
PROGRESSIVE DAMAGE MODEL FOR FIBRE REINFORCED POLYMER COMPOSITESR.K.Joki (Sintef) |
|
| 18.10 |
18.30 |
|
|
INVESTIGATING LOCAL PARTICLE AGGREGATION EFFECT ON TENSILE STRENGTH OF COMPOSITESJ.Tsai (National Chiao Tung University) |
|
