|
A
Abou El-Khair M.
Microstructure and Wear Behaviour of Squeeze Cast7075
Al-Al2O3 particle composites
View Abstract (Full article not available) top
Alefragis P.S.
Parametric investigation of fatigue life prediction
methodology
View Full Article top
Antolinos C.
Thermal Analysis of Polymer Resin Matrix Reinforced with
E-glass Fibres Degradated in Neutral Environments
View Full Article
Modeling of Long-Term Degradation of E-glass Reinforced Composites in Organic Environments
View Full Article top
Abdullah E.
Development of a new finite element for composite
delamination analysis
View Full Article top
Aboura Z.
Effect of structural parameters on mechanical behaviour of
stitched sandwiches
View Full Article top
Adambaev U.
The numerical and mathematical modelling of elastic plastic
transversely isotropic materials
View Full Article top
Akkerman R.
Permeability Prediction of Non-Crimp Fabrics Based on a
Geometric Model
View Full Article top
Alibeiglou A.
Optimal stacking sequence of laminated cylindrical panel
using generic algorithm
View Abstract (Full article not available)
Elasticity solution of thick laminated cylindrical panel
with piezoelectric layer under dynamic loading
View Abstract (Full article not available) top
Al-Khanbashi A.
Natural Fibers Reinforced Composites from Date Palm Fibers
View Full Article top
Altstadt V.
Fine-tuning the properties of poly(ether ether ketone)/poly(ether
imide) blends by the addition of carbon nanofibres
View Full Article top
Altus E.
Hygrothermal effects on interlaminar strength and cracking
of thick Graphite-Phenolic Laminates
View Full Article top
Amici M.
THE USE OF MICROFOCUS SYNCHROTRON X-RAY RADIATION AS A
NOVEL TECHNIQUE TO STUDY THE INTERFACE IN COMPOSITES
View Full Article
Processing and characterisation of Polyhedral oligomeric
silsesquioxanes (POSS®) nanocomposites
View Full Article top
Anastasiadis S.H.
Dynamics in intercalated polymer-clay nanocomposites
View Abstract (Full article not available)
Polyolefin/Silicate Nanocomposites
View Abstract (Full article not available) top
Anifantis N.K.
Prediction of the Mechanical Properties of FRP's by Means
of the Concept of Hybrid Interphase
View Full Article top
Antonucci V.
Numerical simulation and Experimental characterization of
RIFT process
View Full Article top
Aoki R.
New Approach in Process Monitoring of Vacuum Assisted Resin
Infusion Process (VARI)
View Full Article top
Aoki T.
Nonlinear Analysis for Monitoring Bonded Patch Delamination
View Full Article top
Aono Y.
Fatigue Characteristics of Hybrid Composites with Non-Woven
Carbon Tissue
View Full Article top
Argüellesa A.
IMPACT RESISTANCE MODIFICATION OF PEI REINFORCED WITH
CARBON FIBER TEXTILE AFTER MECHANICAL, HIGROTHERMAL, AND HIGROTHERMAL-MECHANICAL
EXPOSURE
View Full Article top
Asami T.
Damping properties of carbon-fiber reinforced epoxy
composites with viscoelastic interleaf films
View Full Article top
Asp L.E.
Effects of stitch pattern on the mechanical properties of
non-crimp fabric composites
View Full Article top
Atiq R.
FRACTURE BEHAVIOUR OF MULLITE FIBRE REINFORCED MULLITE
MATRIX COMPOSITES UNDER QUASI-STATIC AND BALLISTIC IMPACT LOADING
View Abstract (Full article not available) top
Abachi P.
The effect of Thermal Cycling on the stiffness and Density
of the short Fiber Al2O3/WE54 Mg Alloy Composite
View Full Article top
Abdel-Azim A. N.
Microstructure and Wear
Behaviour of Squeeze Cast7075 Al-Al2O3 particle composites
View Full Article top
Abe M.
A miniaturized post-impact compression test for curved
composites
View Full Article top
Abedian A.
Elasto-plastic analysis of delamination phenomena in
laminated composites under thermal loads
View Full Article top
Accardo A. F.
Preliminary Design and Concepts of a New Full Composite UAV
View Abstract (Full article not available) top
Adachi E.
Nonlinear Mechanical Response of CFRP Laminates under
Off-Axis Tensile Loading
View Full Article top
Afaq K.
Development of a Finite Element Analysis software for
composite materials structures based on a new exponential model in order to
incorporate the effect of transverse shear stresses
View Full Article top
Aiello M. A.
STABILITY ANALYSIS OF SANDWICH PANELS WITH CORE-SKIN
DELAMINATIONS
View Abstract (Full article not available) top
Aitchison G.
Phosphate Glass Fibres as Reinforcement in Degradable
Composites for Medical Implant Devices
View Abstract (Full article not available) top
Akkas H. D.
Microstructure and mechanical properties of ceramic matrix
composites (CMCs) from polysiloxane and inert / active fillers
View Full Article top
Alba-Sanchez D.
Propagation of a matrix bridged crack in a SiC/Ti
composite: experiments and modelling
View Full Article top
Alberitni G.
Finite element simulation and experimental determination of
residual stresses after extrusion process in Metal Matrix Composites
View Full Article top
Alcock B.
Temperature and strain rate dependant mechanical behaviour
of all-PP composites - comparison with GMT and NMT
View Full Article top
Alig I.
Dielectric spectroscopy and thermally stimulated
depolarization currents on carbon nanotube - polycarbonate composites
View Abstract (Full article not available) top
Aliverdiev A.
AUTHOMATISATION OF DYNAMIC ELECTRONIC SPECKLE PATTERN
INTERFEROMETRY MEASUREMENTS IN APPLICATION TO DEFECT DETECTION
View Abstract (Full article not available) top
Allegri G.
DELAMINATION/DEBOND GROWTH IN Z-FIBRE REINFORCED COMPOSITE
T-JOINT: A FINITE ELEMENT SIMULATION
View Full Article top
Alshamsi A.
THE VACUUM INFUSION MOLDING PROCESS FOR STRENGTHENING
CONCRETE STRUCTURES
View Full Article top
Altintzi I.
Durability of FRP Strengthened Concrete Structures
View Abstract (Full article not available) top
Aly-Hassan M. S.
Strength Improvement and Notch Insensitivity of
Carbon/Carbon Composites using ESPI-NDE
View Abstract (Full article not available) top
Alzina A.
The influence of phonon transmission impedance on the
thermal conductivity in composite material for cryogenic structure
View Full Article top
Amigó V.
On the precipitation-hardening behaviour of ceramic
reinforced AA6061 composites
View Abstract (Full article not available) top
Andrade A. H. P.
Microstructural analysis in asymmetric and non-balanced
composite cylinders damaged by internal pressure
View Full Article top
Andreu F.
Mechanical behaviour in HDPE-tyre reused Rubber Composites.
Effect of chemical modification
View Full Article top
Andrich M.
Failure Behaviour of Textile Reinforced Composites under
Dynamic Loading
View Full Article top
Aniskevich A.
EFFECT OF TEMPERATURE ON NONLINEAR CREEP OF SOME
THERMOPLASTS
View Full Article top
Antoniou A. E.
Delamintaion Detection in Thick Composite Laminates Using
guided ultrasonic waves
View Full Article top
Antunes F. V.
Fatigue behaviour of hybrid composite laminates subjected
to bending loading
View Full Article top
Arici A.A.
IMPACT-FATIGUE BEHAVIOUR OF CARBON/PEI COMPOSITE MATERIALS
View Abstract (Full article not available) top
Arkhireeva A.
ORGANIC-INORGANIC HYBRID NANOPARTICLES AS MODIFIERS FOR
POLYMER COMPOSITE MATRICES
View Full Article top
Askeland P. A.
UV-Ozone Surface Modifiaction of Carbon Based
Reinforcements for Composite Materials
View Full Article top
Assimakopoulou T.T.
Delamintaion Detection in Thick Composite Laminates Using
guided ultrasonic waves
View Full Article top
B top
Beakou A.
The influence of phonon transmission impedance on the
thermal conductivity in composite material for cryogenic structure
View Full Article top
Blazewicz S.
Influence of curing conditions
of polysiloxane ceramic precursors on mechanical properties of ceramic matrix
composites
View Abstract (Full article not available) top
Barkanov E.
Finite element modelling and dynamic analysis of
laser-welded sandwich panels
View Full Article top
Barkoula N.-M.
Temperature and strain rate dependant mechanical behaviour
of all-PP composites - comparison with GMT and NMT
View Full Article top
Basso P.
Preliminary Design and Concepts of a New Full Composite UAV
View Abstract (Full article not available) top
Bellenger V.
Experimental evidence of coupling between matrix cracking
and oxidation during thermal ageing of C/epoxy laminates
View Full Article top
Benzeggagh M.
Effect of structural parameters on mechanical behaviour of
stitched sandwiches
View Full Article top
Bergerot A.
Influence of a thermal shield on the damage tolerance for
composite structures of launchers
View Full Article top
Beyeler P.
Hybrid thermoplastic composite beam structures integrating
UD tows, stamped fabrics, and injection/compression moulding
View Full Article top
Bittencourt T.N.
Determination of the interface colapse load between
concrete and fiber reinforce polymer
View Abstract (Full article not available) top
Blab R.
Optimization of multi-composed materials: Application to
asphalt pavements
View Full Article top
Blassiau S.
Micromechanical Damage and Life Prediction of Carbon Fiber
Composite Pressure Vessels
View Full Article top
Bogoeva-Gaceva G.
COMPARISON OF DIFFERENT MODELS FOR SPHERULITIC GROWTH
EVALUATION IN FIBER-REINFORCED POLYMER COMPOSITES
View Abstract (Full article not available) top
Brøndsted P.
Life predictions of long fiber composites in extreme
environmental conditions using damage evolution approach
View Full Article top
Bureau M.N.
Polypropylene-Clay Nanocomposites: Formulation,
Microstructure and Performance
View Abstract (Full article not available) top
Burling L.D.
Phosphate Glass Fibres as Reinforcement in Degradable
Composites for Medical Implant Devices
Not available top
Bacchi E.
AUTHOMATISATION OF DYNAMIC ELECTRONIC SPECKLE PATTERN
INTERFEROMETRY MEASUREMENTS IN APPLICATION TO DEFECT DETECTION
View Full Article top
Badcock R.
Health Monitoring of Composite Structures Using a Novel
Fibre Optic Acoustic Emission Sensors
View Full Article top
Bailey D. A.
Effects of Damage on the Energy Absorption of Composite
Tubes
View Full Article top
Balandraud X.
Optimization of composite patches with a genetic algorithm
View Full Article
A two-dimensional approach to compute shear stresses in
bonded composite patches
View Full Article top
Balhi N.
Finite Element Modelling of Crack Growth in Composites
View Abstract (Full article not available) top
Banks W. M.
Analysis of Interfacial Micromechanics of Single-Fibre
Model Composites using Synchrotron Microfocus X-ray Diffraction
View Full Article top
Baptiste D.
Micromechanical analysis of strain rate effect on damage
evolution in discontinuous fibre composites
View Full Article top
Barber A.
RECENT ADVANCES IN THE MECHANICS OF CARBON NANOTUBES AND
THEIR COMPOSITES
View Full Article top
Barbezat M.
Active Fibre Composites: Sensors and Actuators for Smart
Composites & Structures
View Full Article top
Barbie J.
Influence of natural fibre reinforcement on microstructural
and mechanical properties of polypropylene
View Full Article top
Barbier J.-E.
Heat sink with adaptive thermal properties
View Abstract (Full article not available) top
Barone L.
Recycling of PP-based sandwich panels with continuous
fibers composite skins
View Full Article top
Barpanda P.
Effects of particulate fly ash filler addition and sliding
velocity on wear behaviour of epoxy system
View Full Article top
Barrau J. J.
Development of a new finite element for composite
delamination analysis
View Full Article
Influence of a thermal shield on the damage tolerance for
composite structures of launchers
View Full Article top
Barroso A.
Evaluation of generalized stress intensity factors in
anisotropic elastic multimaterial corners
View Full Article top
Baruffaldi G.
Investigation of Hygrothermal Ageing Phenomena in Model
Composites by Raman Spectroscopy
View Full Article top
Bassoli E.
Planning and manufacturing a mould for Resin Transfer
Moulding
View Full Article top
Bastianini F.
3D Finite Element Damage Analysis of a Twill-weave Lamina
subjected to In-plane Shear
View Full Article top
Baudry P.
Influence of PAN-based carbon fibers surface properties on
the interfacial bonding to a phenolic matrix
View Full Article top
Bednarova B.
Processing, properties, and performance of polysiloxane-derived
ceramic matrix in heat resistant composites reinforced with R-glass or fine
ceramic fibres
View Full Article top
Bekiari V.
Photoluminescence Studies on Hybrid Organic/Inorganic
Nanocomposite Gels
View Full Article top
Benmedakhene S.
Simulation of acoustic emission sources in composite plates
View Abstract (Full article not available) top
Bentefour E. H.
IR nonlinear photothermal imaging in Carbon/Epoxy composite
materials: Experimental survey
View Full Article top
Berghmans B.
A continuous process for UD flax fibre reinforced
composites
View Full Article top
Bernardo C. A.
Optimisation of the Low-Shear Compounding of Carbon
Nanofibre/Polymer Composites
View Full Article top
Bettge D.
Analysis of the Thermo-mechanical Fatigue Behaviour of
SiC-fibre reinforced Titanium Alloy (SCS-6/Ti-6242)
View Full Article top
Bica D.
THE USE OF NANOMAGNETIC FLUIDS TO ENHANCE THE PRODUCTION OF
COMPOSIT PARTS COMPONENTS MADE BY RTM
View Full Article top
Bijwe J.
Development of Bearing Material and High Performance
Bearings for Dry Applications Under Harsh Operating Conditions
View Full Article top
Bing Q.
A Technique for High Strain Rate SHPB Testing of Off-Axis
Carbon Fiber Composites
View Full Article top
Blázquez A.
An analysis of transversal and delamination cracks in
0o/90o symmetric laminates by BEM
View Full Article top
Boccaccini A. R.
GLASS MATRIX COMPOSITE FOAMS CONTAINING METALLIC FIBRES
PRODUCED BY MICROWAVE HEATING
View Full Article
FRACTURE BEHAVIOUR OF MULLITE FIBRE REINFORCED MULLITE
MATRIX COMPOSITES UNDER QUASI-STATIC AND BALLISTIC IMPACT LOADING
View Full Article top
Boccaccini D. N.
FRACTURE BEHAVIOUR OF MULLITE FIBRE REINFORCED MULLITE
MATRIX COMPOSITES UNDER QUASI-STATIC AND BALLISTIC IMPACT LOADING
View Full Article top
Bochenek B.
Application of Stochastic Optimization to Reconstruction of
Random Microstructures
View Full Article top
Boisse P.
Meso-macro approach in simulation of very unbalanced
textile forming
View Full Article top
Bollas D.
SPECTROSCOPIC AND MECHANICAL CHARACTERIZATION OF ISOTACTIC
AND SYNDIOTACTIC POLYPROPYLENE NANOCOMPOSITES
View Full Article top
Bond I.
ACOUSTIC EMISSION MONITORING OF BLOCK LOADING INTERACTION
DAMAGE ACCUMULATION DURING FATIGUE OF CFRP COMPOSITES
View Full Article
Self Repair And Enhanced Damage Visibility In A Hollow
Fibre Reinforced Plastic.
View Full Article top
Bonfiglioli B.
LIGHTWEIGHT COMPOSITE PRESSURE HOUSINGS FOR MID-WATER AND
BENTHIC APPLICATIONS
View Full Article top
Bordreuil C.
Rupture prediction of woven ply laminated plate with an
open hole
View Full Article top
Bourchak M.
ACOUSTIC EMISSION MONITORING OF BLOCK LOADING INTERACTION
DAMAGE ACCUMULATION DURING FATIGUE OF CFRP COMPOSITES
View Full Article top
Bouvet C.
Influence of a thermal shield on the damage tolerance for
composite structures of launchers
View Full Article top
Bozhevolnaya E.
Localised Effects in Striuctural Sandwich Panels: Practical
Occurrence, analysis and Design
View Full Article top
Brantseva T.
Adhesion of epoxy-polysulfone matrices to fibres under
impact loading
View Full Article top
Brechet Y.
Modeling Damage Evolution and Fracture in Metal Matrix
Composites
View Full Article top
Breen C.
Impact of Thick CFRP Panels: Near Free Edge Impact
View Full Article top
Bressiani A. H. A.
Silicon Nitride/Niobium Carbide Particulate Composites
View Full Article top
Bressiani J. C.
Silicon Nitride/Niobium Carbide Particulate Composites
View Full Article top
Brillaud J.
Influence of natural fibre reinforcement on microstructural
and mechanical properties of polypropylene
View Full Article top
Brunner A. J.
Active Fibre Composites: Sensors and Actuators for Smart
Composites & Structures
View Full Article top
Budescu M.
ANALYSIS AND BEHAVIOUR OF SANDWICH PANNELS WITH
PROFILED METAL FACINGS UNDER TRANSVERSE LOAD
View Full Article top
Bunsell A. R.
Micromechanical Damage and Life Prediction of Carbon Fiber
Composite Pressure Vessels
View Full Article top
Busquets D.
On the precipitation-hardening behaviour of ceramic
reinforced AA6061 composites
View Full Article top
Busquets-Mataix D.
REINFORCEMENT INFLUENCE ON PRECIPITATION PHENOMENA IN Ti3Al
INTERMETALLIC REINFORCED ALUMINIUM MATRIX COMPOSITES
View Full Article top
Butler T.
Health Monitoring of Composite Structures Using a Novel
Fibre Optic Acoustic Emission Sensors
View Full Article top
Byun J. -H.
Similarity Relations of Process Variables in Resin Flow of
RTM Process
View Full Article top
C top
Costantino L.
STABILITY ANALYSIS OF SANDWICH PANELS WITH CORE-SKIN
DELAMINATIONS
View Full Article top
Cabrera N.O.
Temperature and strain rate dependant mechanical behaviour
of all-PP composites - comparison with GMT and NMT
View Full Article top
Cantwell W.
Formability Characteristics of Polymer-Metal Laminates and
Random Fibre Based Fibre-Metal Laminates
View Full Article
Effect of Process Temperature and Blank-Holder Force on the
Forming of Fibre Metal Laminate Systems
View Full Article top
Caponero M.
AUTHOMATISATION OF DYNAMIC ELECTRONIC SPECKLE PATTERN
INTERFEROMETRY MEASUREMENTS IN APPLICATION TO DEFECT
DETECTION
View Full Article top
Cardew-Hall M.J.
Formability Characteristics of Polymer-Metal Laminates and
Random Fibre Based Fibre-Metal Laminates
View Full Article
Effect of Process Temperature and Blank-Holder Force on the
Forming of Fibre Metal Laminate Systems
View Full Article top
Carlsen T.
Failure analysis of filament wound composite to metal
joints using Puck's failure criterion
View Full Article top
Carrascal I.
EFFECT OF VISCOSITY ON MECHANICAL BEHAVIOUR OF SHORT-FIBRE
GLASS REINFORCED PA 6.6 PARTS
View Full Article
DETERMINATION OF LIMIT LOAD FATIGUE FAILURE OF FIBRE-GLASS
REINFORCED PA 6.6 COMPONENTS USING ENERGY
CONSIDERATIONS
View Full Article top
Carvelli V.
Experimental and numerical determination of the mechanical
properties of multi-axial multi-ply composites
View Full Article
Transversal resistance of long-fibre composites: influence
of the fibre-matrix interface
View Full Article top
Casado J. A.
EFFECT OF VISCOSITY ON MECHANICAL BEHAVIOUR OF SHORT-FIBRE
GLASS REINFORCED PA 6.6 PARTS
View Full Article
DETERMINATION OF LIMIT LOAD FATIGUE FAILURE OF FIBRE-GLASS
REINFORCED PA 6.6 COMPONENTS USING ENERGY
CONSIDERATIONS
View Full Article top
Caton-Rose P.
FIBRE ORIENTATION STRUCTURES AND THEIR EFFECT ON THE CRACK
RESISTANCE OF AN INJECTION MOULDED TRANSVERSE
RIBBED PLATE
View Full Article top
Cauchi-Savona S.
Effects of stitching parameters on the energy absorption of
flat composite plates
View Full Article top
Chauchot P.
LIGHTWEIGHT COMPOSITE PRESSURE HOUSINGS FOR MID-WATER AND
BENTHIC APPLICATIONS
View Full Article top
Chen R.
Health Monitoring of Composite Structures Using a Novel
Fibre Optic Acoustic Emission Sensors
View Full Article top
Cheong S.K.
Fatigue Characteristics of Hybrid Composites with Non-Woven
Carbon Tissue
View Full Article top
Chi T.T.
PROGRESSIVE DAMAGE CHARACTERIZATION OF STITCHED, BI-AXIAL,
MULTI-PLY CARBON FABRICS COMPOSITES
View Full Article top
Chou T.W.
Modeling and Characterization of Carbon Nanotubes and their
Composites
View Full Article top
Clarke A.
Analysis of Z-fibre effect on the failure modes of a
composite rib
View Full Article top
Cloetens P.
X-RAY TOMOGRAPHIC INVESTIGATION OF STOCHASTIC DAMAGE IN
POLYMER COMPOSITES
View Full Article top
Compston P.
Improve design and manufacture of a high performance
composite oar blade
View Full Article
Formability Characteristics of Polymer-Metal Laminates and
Random Fibre Based Fibre-Metal Laminates
View Full Article
Effect of Process Temperature and Blank-Holder Force on the
Forming of Fibre Metal Laminate Systems
View Full Article top
Conza R.
AUTHOMATISATION OF DYNAMIC ELECTRONIC SPECKLE PATTERN
INTERFEROMETRY MEASUREMENTS IN APPLICATION TO DEFECT
DETECTION
View Full Article top
Cook S.
Optical fibre sensor for monitoring flow and resin curing
in composites manufacturing
View Full Article top
Cookson P.
Carbon Nanotube-Polymer Composites for use as Remote
Strain-Sensor Coatings
View Full Article top
Cozien-Cazuc S.
Phosphate Glass Fibres as Reinforcement in Degradable
Composites for Medical Implant Devices
View Full Article top
Calabrese L.
Mathematical modelling of the pultrusion process of
polyester-glass fibre composites
View Full Article top
Calard V.
RANDOM LOCAL LOAD SHARING IN MULTIFILAMENT BUNDLES :
MODELLING AND INFLUENCE ON ULTIMATE FAILURE COMPOSITES
View Full Article
A PROBABILISTIC-STATISTICAL APPROACH TO THE ULTIMATE
FAILURE OF TEXTILE CERAMIC MATRIX COMPOSITES
View Full Article top
Calil Jr. C.
Sisal Fibres Composites for timber elements reinforcement
View Full Article top
Caliskan A. G.
Effects of Damage on the Energy Absorption of Composite
Tubes
View Full Article top
Calvo I.
Structural design and testing of a composite wind turbine
tower module
View Full Article top
Campbell J.
Improve design and manufacture of a high performance
composite oar blade
View Full Article top
Camus G.
Thermomechanical properties of CVI-processed Si-B-C based
carbides as derived from the behavior of carbon fiber-reinforced microcomposites
View Full Article top
Cannillo V.
GLASS MATRIX COMPOSITE FOAMS CONTAINING METALLIC FIBRES
PRODUCED BY MICROWAVE HEATING
View Full Article top
Caprino G.
FRACTURE SURFACES OF CFRP LAMINATES STATICALLY LOADED AT
THE CENTRE
View Full Article top
Cardon A.
OPTIMISATION OF A CRUCIFORM TEST SPECIMEN FOR BIAXIAL
LOADING OF FIBER REINFORCED MATERIAL SYSTEMS
View Full Article top
Caron J. -F.
Validation of a piezoelectric laminated plate modelling
View Full Article top
Carrascal I.
EFFECT OF VISCOSITY ON MECHANICAL BEHAVIOUR OF SHORT-FIBRE
GLASS REINFORCED PA 6.6 PARTS
View Full Article
DETERMINATION OF LIMIT LOAD FATIGUE FAILURE OF FIBRE-GLASS
REINFORCED PA 6.6 COMPONENTS USING ENERGY
CONSIDERATIONS
View Full Article top
Carrere N.
A CRITERION BASED ON STRESS AND ENERGY FOR THE ONSET OF
TRANSVERSE CRACKING
View Full Article
A multiscale progressive failure criterion for composite
materials
View Full Article
Propagation of a matrix bridged crack in a SiC/Ti
composite: experiments and modelling
View Full Article top
Carrillo F.
Mechanical behaviour in HDPE-tyre reused Rubber Composites.
Effect of chemical modification
View Full Article top
Carrino L.
Influence of winding speed on winding tension in robotized
filament winding of complex-shape parts
View Full Article top
Carvalho R. F.
Sisal Fibres Composites for timber elements reinforcement
View Full Article top
Casado J. A.
EFFECT OF VISCOSITY ON MECHANICAL BEHAVIOUR OF SHORT-FIBRE
GLASS REINFORCED PA 6.6 PARTS
View Full Article
DETERMINATION OF LIMIT LOAD FATIGUE FAILURE OF FIBRE-GLASS
REINFORCED PA 6.6 COMPONENTS USING ENERGY
CONSIDERATIONS
View Full Article top
Cebula W.
Influence of matrix composition on creep of aluminium-based
composites
View Full Article top
Cendre E.
Micromechanical investigation of the influence of fibre
sizings on the crack bridging behaviour of glass fibre composites
View Full Article top
Cerini M.
An Automated Combined Static-Dynamic Procedure for
Capturing Mode-Switching in Postbuckling Structures
View Full Article top
Cerny M.
Processing, properties, and performance of polysiloxane-derived
ceramic matrix in heat resistant composites reinforced with R-glass or fine
ceramic fibres
View Full Article top
Cervenka A. J.
Investigation of Hygrothermal Ageing Phenomena in Model
Composites by Raman Spectroscopy
View Full Article top
Cestino E.
HELIPLAT: Manufacturing and Structural Design of Solar
Powered UAV Scaled Prototype
View Full Article top
Chaboche J. -L.
Propagation of a matrix bridged crack in a SiC/Ti
composite: experiments and modelling
View Full Article top
Chalal H.
IDENTIFICATION OF ELASTIC STIFFNESS AND DAMAGE MODEL FOR
ANISOTROPIC COMPOSITE MATERIALS BY THE VIRTUAL FIELDS
METHOD
View Full Article top
Chandrasekar S.
Influence of Acid Rain on the Tracking Phenomena in
Silicone Rubber Insulation - Diagnosis through Physico-Chemical Analysis
View Full Article top
Chang L.
Sliding Wear of Polyamide 6,6 Nanocomposites
View Full Article top
Chatzigeorgiou L.
New Approach in Process Monitoring of Vacuum Assisted Resin
Infusion Process (VARI)
View Full Article top
Chen G. Z.
Carbon Nanotube-Conducting Polymer Nanocomposites
View Full Article top
Chen J.
Fabrication of Carbon Nanotue-TiC Nanocomposites by Spark
Plasma Sintering
View Full Article top
Cheng H. M.
Fatigue failure mechanisms of single-walled carbon nanotube
ropes
View Full Article top
Cho D.
Mechanical and Thermal Properties of Novel Silk/Poly(butylene
succinate) Biocomposites
View Full Article top
Chow W. S.
Microstructural Characterisations and Mechanical Properties
of Compatibilized Polyamide 6/Polypropylene/Organoclay Nanocomposites
View Full Article top
Chrissopoulou K.
Dynamics in intercalated polymer-clay nanocomposites
View Full Article
Polyolefin/Silicate Nanocomposites
View Full Article top
Chrysochoidis N.
Identifying the Temperature Effect on the Damped Response
of Composite Beams using Piezoceramic Actuators and Sensors
View Full Article top
Ciongradi I.
ANALYSIS AND BEHAVIOUR OF SANDWICH PANNELS WITH
PROFILED METAL FACINGS UNDER TRANSVERSE LOAD
View Full Article top
Ciselli P.
Processing of Carbon Nanotube Composites using Latex
Technology
View Full Article top
Clifford M.
Flow characterisation for partially impregnated prepregs
View Full Article top
Clifford M.J.
Simulation of Viscous Textile Composite Sheet Forming based
on a Unit Cell Energy Model
View Full Article top
Coates P.D.
FIBRE ORIENTATION STRUCTURES AND THEIR EFFECT ON THE CRACK
RESISTANCE OF AN INJECTION MOULDED TRANSVERSE
RIBBED PLATE
View Full Article top
Collini L.
Fatigue Crack Resistance of 6061 and 7005 Aluminum Alloy -
Al2O3 Particulate Composites
View Full Article top
Collombet F.
Precise Positioning of Unit Cells and Embedded
Instrumentation for Fabrication and Pressure Testing of Filament Wound Tubes
View Full Article
INSTRUMENTED TECHNOLOGICAL SPECIMEN (ITS): CURING PROCESS
AND MECHANICAL CHARACTERISATION USING EMBEDDED
FIBER BRAGG GRATINGS
View Full Article top
Colom X.
Mechanical behaviour in HDPE-tyre reused Rubber Composites.
Effect of chemical modification
View Full Article top
Comte E.
Effect of fibre sizing on sheet moulding compounds rheology
View Full Article top
Cook J.
Investigation into the failure of open and filled holes in
CFRP laminates under biaxial loading conditions
View Full Article top
Corigliano A.
Transversal resistance of long-fibre composites: influence
of the fibre-matrix interface
View Full Article top
Cornelis E.
X-Ray Computed Tomography characterising Carbon Fibre
Reinforced Composites
View Full Article top
Correa E.
Micromechanical aspects of the inter-fibre failure in
fibrous composite materials under bi-axial loads
View Full Article top
Corsino G.
HELIPLAT: Manufacturing and Structural Design of Solar
Powered UAV Scaled Prototype
View Full Article top
Corvaglia P.
Recycling of PP-based sandwich panels with continuous
fibers composite skins
View Full Article top
Costa A. N.
Smart Composite Plates for Health Monitoring of a Boat
Structure
View Full Article top
Costa J. D. M.
Fatigue behaviour of hybrid composite laminates subjected
to bending loading
View Full Article top
Coutinho A. C. S.
Silicon Nitride/Niobium Carbide Particulate Composites
View Full Article top
Craft J. S.
Gamma Titanium Aluminide Matrix Composites: A Parametric
Study of Optimum Constituents
View Full Article top
Crainic .N
THE USE OF NANOMAGNETIC FLUIDS TO ENHANCE THE PRODUCTION OF
COMPOSIT PARTS COMPONENTS MADE BY RTM
View Full Article top
Crivelli Visconti I.
Solution impregnation of natural fibres/ABS matrix
composites
View Full Article
New resin Film infusion process for manufacture of large
composite structures
View Full Article top
Cuypers H.
Off-axis behaviour of cement matrix composites
View Full Article top
D top
Davies P.
THE USE OF MICROFOCUS SYNCHROTRON X-RAY RADIATION AS A
NOVEL TECHNIQUE TO STUDY THE INTERFACE IN COMPOSITES
View Full Article
Precise Positioning of Unit Cells and Embedded
Instrumentation for Fabrication and Pressure Testing of Filament Wound Tubes
View Full Article top
Davis R.J.
Analysis of Interfacial Micromechanics of Single-Fibre
Model Composites using Synchrotron Microfocus X-ray Diffraction
View Full Article top
Daynand G. N.
Recovery stress generation by shape memory alloy
polycrystalline elements
View Full Article top
De Castro P.T.
Mode II fracture toughness of glass/epoxy multidirectional
laminates
View Full Article top
De Morais A. B.
Mode II fracture toughness of glass/epoxy multidirectional
laminates
View Full Article top
Derrien K.
Mechanical behaviour predictions of nonlinear viscoelastic
composite materials by a homogenisation of random mixtures approach
View Full Article top
Dourges M.A.
Influence of PAN-based carbon fibers surface properties on
the interfacial bonding to a phenolic matrix
View Full Article top
Drzal L.T.
UV-Ozone Surface Modifiaction of Carbon Based
Reinforcements for Composite Materials
View Full Article
Effect of Processing on the Thermo-Mechanical and
Electrical Properties of Exfoliated Nano-Graphite Reinforced Polypropylene
View Full Article top
Duckett R.A.
FIBRE ORIENTATION STRUCTURES AND THEIR EFFECT ON THE CRACK
RESISTANCE OF AN INJECTION MOULDED TRANSVERSE
RIBBED PLATE
View Full Article top
Dudenhausen W.
New Approach in Process Monitoring of Vacuum Assisted Resin
Infusion Process (VARI)
View Full Article top
Dudkin S.M.
Dielectric spectroscopy and thermally stimulated
depolarization currents on carbon nanotube - polycarbonate composites
View Full Article top
Durante M.
Solution impregnation of natural fibres/ABS matrix
composites
View Full Article
New resin Film infusion process for manufacture of large
composite structures
View Full Article
Numerical simulation and Experimental characterization of
RIFT process
View Full Article top
Da Silva A. A. M.
Properties and Fracture Analysis of Diffusion Bonded TiC-Particulate
Reinforced Ti-6Al-4V Titanium Matrix Composite
View Full Article top
Daneshmehr A.
Elasticity solution of thick laminated cylindrical panel
with piezoelectric layer under dynamic loading
View Full Article top
Daniel I. M.
A stochastic approach to the fibre micro-buckling problem
in layered composites with interfacial defects
View Full Article
Similarity Relations of Process Variables in Resin Flow of
RTM Process
View Full Article top
Daniel J. L.
Meso-macro approach in simulation of very unbalanced
textile forming
View Full Article top
Danzuka M.
Fatigue Characteristics of Hybrid Composites with Non-Woven
Carbon Tissue
View Full Article top
Daoud A.
Microstructure and Wear
Behaviour of Squeeze Cast7075 Al-Al2O3 particle composites
View Full Article top
Darpe A.
Active Vibration Control of Reinforced and non-Reinforced
Lightweight Structures
View Full Article top
Dassios K. G.
Assessment of Crack Shielding in Ceramic Matrix Composites
in the Presence of Large Scale Effects
View Full Article
Fracture Behavior and Damage Characterization of SiC/Glass
ceramic composites
View Full Article top
Dau F.
Using a C 1 triangular Finite element based on a refined
model for analyzing buckling and post-buckling of multilayered shell structures
View Full Article top
David L.
Morphology of PA6-nanocomposite fibres by means of ESEM
study of fracture surfaces
View Full Article top
Davies R.J.
THE USE OF MICROFOCUS SYNCHROTRON X-RAY RADIATION AS A
NOVEL TECHNIQUE TO STUDY THE INTERFACE IN COMPOSITES
View Full Article top
Dávila C. top
Daxner T.
Thermo-Mechanically Interacting Composite Pipes Optimised
by Genetic Algorithms
View Full Article top
De Bolster E.
Off-axis behaviour of cement matrix composites
View Full Article top
De Iorio I.
New resin Film infusion process for manufacture of large
composite structures
View Full Article top
Degischer H. P.
X-Ray Computed Tomography characterising Carbon Fibre
Reinforced Composites
View Full Article top
Degrange J. M.
Evolution of the exfoliation of lamellar materials during
polymerisation of polyamide-6
View Full Article top
Degrieck J.
Simulating Damage and Permanent Strain in Fibre-reinforced
Composites under In-plane Fatigue Loading
View Full Article top
Deifalla A.
Analytical torsion model for strengthened concrete beams
View Full Article top
Denault J.
New Tooling Concept for Large Volume Production of Parts
Made of Continuous Fiber Thermoplastic Composites
View Full Article
Polypropylene-Clay Nanocomposites: Formulation,
Microstructure and Performance
View Full Article top
Denes F.
Synthesis of Novel Lignin-based Composite Materials Using
Cold-Plasma Technique
View Full Article top
Deng M.
Atomistic Modeling of Composite Interfaces
View Full Article top
Deng Y.
Optical fibre sensor for monitoring flow and resin curing
in composites manufacturing
View Full Article top
Derek J. Fray
Carbon Nanotube-Conducting Polymer Nanocomposites
View Full Article top
Despagne P.
Heat sink with adaptive thermal properties
View Full Article top
Destrebecq J.-F.
Creep behaviour of reinforced concrete beams strengthened
with composite plates
View Full Article top
Diamanti K.
Application of a Lamp Wave Technique for the
Non-Destructive Inspection of Composite Structures
View Full Article top
Diso D.
ALL OXIDE CERAMIC MATRIC COMPOSITES FOR THERMOSTRUCTURAL
APPLICATIONS
View Full Article top
Djordjević I.
EDGE EFFECT ON CARBON/EPOXY STRENGTH AND DELAMINATION OF
CARBON/EPOXY LAMINATE WITH DIFFERENT STACKING
SEQUENCE
View Full Article top
Dlouhy I.
FRACTURE BEHAVIOUR OF MULLITE FIBRE REINFORCED MULLITE
MATRIX COMPOSITES UNDER QUASI-STATIC AND BALLISTIC
IMPACT LOADING
View Full Article top
Dobes F.
Influence of matrix composition on creep of aluminium-based
composites
View Full Article top
Dominauskas A.
Embedded Sensor Based Health Monitoring System of a
Composite Bridge Deck
View Full Article top
Donadon M. V.
IMPACT DAMAGE IN COMPOSITE STRUCTURES MANUFACTURED USING
RESIN INFUSION UNDER FLEXIBLE TOOLING (RIFT) PROCESS
View Full Article top
Dos Santos A. C.
Determination of the interface colapse load between
concrete and fiber reinforce polymer
View Full Article top
Dos Santos J. F.
Properties and Fracture Analysis of Diffusion Bonded TiC-Particulate
Reinforced Ti-6Al-4V Titanium Matrix Composite
View Full Article top
Douchin B.
Precise Positioning of Unit Cells and Embedded
Instrumentation for Fabrication and Pressure Testing of Filament Wound Tubes
View Full Article top
Drechsler K.
New Approach in Process Monitoring of Vacuum Assisted Resin
Infusion Process (VARI)
View Full Article top
Dubkova V. I.
Epoxy composites hardened by phosphorus carbon fibers. Influence of thermal cycling on thermal properties
View Full Article top
Dufort L.
Micro - Macro structural analysis of textile composite
parts
View Full Article top
Dzenis Y. A.
Novel Advanced Continuous Nanofibers as Next Generation
Reinforcement for Composites
View Full Article top
Dzhardimalieva I.
Polymer Matrix Nanocomposites Exhibiting Magnetic
Properties
View Full Article top
E top
Enab T. A.
Performances prediction for a structure with piezoelectric
composite inserts
View Full Article top
Enqvist M.
Reduction of Detrimental Mechanical Anisotropy of LCP
Composites
View Full Article top
Erki M.A.
Rapidly deployable, portable, GFRP VEHICLE Bridge
Development Project
View Full Article top
Eble E.
Hybrid thermoplastic composite beam structures integrating
UD tows, stamped fabrics, and injection/compression moulding
View Full Article top
Edgren F.
Effects of stitch pattern on the mechanical properties of
non-crimp fabric composites
View Full Article top
Edie D. D.
Carbon Fibers from Novel Precursors: Melt-Processible PAN
Terpolymers and UV-Assisted Stabilization Routes
View Full Article top
Ehrlacher A.
Validation of a piezoelectric laminated plate modelling
View Full Article top
Endruweit A.
Dependence of Permeability Variations on the Textile
Structure
View Full Article top
Enqvist J.
Reduction of Detrimental Mechanical Anisotropy of LCP
Composites
View Full Article top
Esteves J. L.
Fatigue Behaviour of Reinforced Concrete Beam Strengthened
with a CFRP Reinforced System
View Full Article
Mechanical Characterisation of Wool Fibres for Reinforcing
of Composite Materials
View Full Article
Mechanical Characterisation of Sisal Fibres for Reinforcing
of Composite Materials with several different surface treatments
View Full Article top
Etter T.
Thermomechanical properties of interpenetrating graphite/aluminium
composites produced by indirect squeeze casting process
View Full Article top
Evseeva L. E.
FEATURES OF THERMOPHYSICAL PROPERTIES OF MODIFIED EPOXY
COMPOSITES AT LOW TEMPERATURES
View Full Article
Epoxy composites hardened by phosphorus carbon fibers. Influence of thermal cycling on thermal properties
View Full Article top
F top
Feldman A.
The decoded model of
transcrystallinity in carbon and aramid fibers reinforced nylon 66 composites
by Synchrotron study
View Full Article top
Fernandez-Cantelia A.
IMPACT RESISTANCE MODIFICATION OF PEI REINFORCED WITH
CARBON FIBER TEXTILE AFTER MECHANICAL, HIGROTHERMAL, AND
HIGROTHERMAL-MECHANICAL EXPOSURE
View Full Article top
Ferrero J. F.
Development of a new finite element for composite
delamination analysis
View Full Article top
Fjeldly A. top
Frazão O.
Smart Composite Plates for Health Monitoring of a Boat
Structure
View Full Article top
Friedrich K.
Friction of Polymer Composites in Liquid Hydrogen Media
View Full Article
Sliding Wear of Polyamide 6,6 Nanocomposites
View Full Article
On the Failure Behaviour of a High-Frequency Loaded CFRP-Composite
View Full Article
FE MODELLING OF WEAR MECHANISMS OF CF/PEEK COMPOSITES
View Full Article top
Frishfelds V. top
Frιour S. top
Fitoussi J. top
Falzon B. G.
An Automated Combined Static-Dynamic Procedure for
Capturing Mode-Switching in Postbuckling Structures
View Full Article
A modified 4 ENF Test Ring for Measuring Mode II Fracture
Toughness Under Compressive Forces at the Crack Interface
View Full Article
Predicting the Compressive Failure Load of a CFRP Stiffened
Panel Using the Seven-Point Bending Test
View Full Article
IMPACT DAMAGE IN COMPOSITE STRUCTURES MANUFACTURED USING
RESIN INFUSION UNDER FLEXIBLE TOOLING (RIFT) PROCESS
View Full Article top
Farahpour H.
Elasto-plastic analysis of delamination phenomena in
laminated composites under thermal loads
View Full Article top
Farrow I.
ACOUSTIC EMISSION MONITORING OF BLOCK LOADING INTERACTION
DAMAGE ACCUMULATION DURING FATIGUE OF CFRP
COMPOSITES
View Full Article top
Faye A.
EXPERIMENTAL VALIDATION OF COMPOSITE MATERIAL STUCTURE
OPTIMISATION BY GENETIC ALGORITHM
View Full Article top
Feih S.
Micromechanical investigation of the influence of fibre
sizings on the crack bridging behaviour of glass fibre composites
View Full Article top
Feiler M.
New Approach in Process Monitoring of Vacuum Assisted Resin
Infusion Process (VARI)
View Full Article top
Feofilov G.
A ligthweight 3-D Support Structure for Precise Tracking
System
View Full Article top
Fernando G. F.
Health Monitoring of Composite Structures Using a Novel
Fibre Optic Acoustic Emission Sensors
View Full Article top
Fernberg S. P.
Particle distribution mechanisms in infusion molded
composites
View Full Article top
Ferreira A. J. M.
Fatigue behaviour of hybrid composite laminates subjected
to bending loading
View Full Article
Characterization of Polymer Concrete made with Recycled
Aggregate
View Full Article top
Fiedler B.
Evaluation of the potential of carbon nanotubes for a
reinforcement of an epoxy matrix
View Full Article
Micromechanical Yielding and Failure of CF/Epoxy caused by
the Formation of Residual Stresses under Macroscopic Boundary Conditions
View Full Article top
Figovsky O. L.
Nanostructured nonosocyanate polyurethane composites
View Full Article
STUDY OF NANO-PLASTICS CONTAINING FILLERS OF VARIOUS TYPES
View Full Article top
Fortsch W.
On the Failure Behaviour of a High-Frequency Loaded CFRP-Composite
View Full Article top
Fournie D.
Fatigue Damaging of Carbon/Epoxy Composite Plates with or
without a hole
View Full Article top
Fragiadakis D.
Dielectric spectroscopy and thermally stimulated
depolarization currents on carbon nanotube - polycarbonate composites
View Full Article
Broadband dielectric spectroscopy for studying morphology
and interfacial effects in polymer nanocomposites
View Full Article top
Franz H. E.
On the Failure Behaviour of a High-Frequency Loaded CFRP-Composite
View Full Article top
Frey T.
Thermomechanical properties of interpenetrating graphite/aluminium
composites produced by indirect squeeze casting process
View Full Article top
Frick B.
Dynamics in intercalated polymer-clay nanocomposites
View Full Article top
Frulla G.
HELIPLAT: Manufacturing and Structural Design of Solar
Powered UAV Scaled Prototype
View Full Article top
Fu Y. Q.
Fatigue failure mechanisms of single-walled carbon nanotube
ropes
View Full Article top
Fukuda H.
Comparison of shearing test methods for pultruded materials
View Full Article top
Fukushima H.
UV-Ozone Surface Modifiaction of Carbon Based
Reinforcements for Composite Materials
View Full Article
Effect of Processing on the Thermo-Mechanical and
Electrical Properties of Exfoliated Nano-Graphite Reinforced Polypropylene
View Full Article top
Funami K.
Finite Element Analysis of Fractures in Natural Plant Cell
Structures
View Full Article top
G top
Gaitonde M.
Analysis of Z-fibre effect on the failure modes of a
composite rib
View Full Article top
Gammage J.
Modeling Damage Evolution and Fracture in Metal Matrix
Composites
View Full Article top
Gamstedt E. K.
Stiffness contribution of wood fibres to composite
materials
View Full Article
Sequence effects in block amplitude fatigue loading of
composite laminates
View Full Article top
Geffro P.M.
Heat sink with adaptive thermal properties
View Full Article top
Gettu R.
Determination of the interface colapse load between
concrete and fiber reinforce polymer
View Full Article top
Giannelis E. P.
Dynamics in intercalated polymer-clay nanocomposites
View Full Article top
Gilchrist M.D.
Mechanical behaviour predictions of nonlinear viscoelastic
composite materials by a homogenisation of random mixtures approach
View Full Article top
Gillespie J. W.
Embedded Sensor Based Health Monitoring System of a
Composite Bridge Deck
View Full Article top
Giordano M.
Numerical simulation and Experimental characterization of
RIFT process
View Full Article top
Giuliani A.
Finite element simulation and experimental determination of
residual stresses after extrusion process in Metal Matrix Composites
View Full Article top
Goda T.
FE MODELLING OF WEAR MECHANISMS OF CF/PEEK COMPOSITES
View Full Article top
Goda K.
The Effect of Alkali Treatment on the Physical and
Mechanical Properties of Curaua Fibers
View Full Article top
Godin N.
Implementation of a multifunctional piezoelectric embedded
sensor for the health monitoring of the whole life cycle of a real composite
structure
View Full Article top
Gomes A.
The Effect of Alkali Treatment on the Physical and
Mechanical Properties of Curaua Fibers
View Full Article top
Gorbatkina Y. A.
Adhesion of epoxy-polysulfone matrices to fibres under
impact loading
View Full Article top
Goutianos S.
An Experimental Micromechanical - Finite Element Assisted
-Approach into the Compressive Failure Mechanisms of Carbon Fibre Composites
View Full Article top
Govaert L.E.
Temperature and strain rate dependant mechanical behaviour
of all-PP composites - comparison with GMT and NMT
View Full Article top
Grédiac M.
IDENTIFICATION OF ELASTIC STIFFNESS AND DAMAGE MODEL FOR
ANISOTROPIC COMPOSITE MATERIALS BY THE VIRTUAL FIELDS
METHOD
View Full Article top
Grozdanov A.
COMPARISON OF DIFFERENT MODELS FOR SPHERULITIC GROWTH
EVALUATION IN FIBER-REINFORCED POLYMER COMPOSITES
View Full Article top
Guarino A.
Recycling of PP-based sandwich panels with continuous
fibers composite skins
View Full Article top
Gude M.
Failure Behaviour of Textile Reinforced Composites under
Dynamic Loading
View Full Article top
Guedes R. M.
Rate-Dependent Mechanical Behavior of CFRP Laminates Under
Compression Loading
View Full Article top
Guillaumat L.
Influence of the drilling on the fatigue behaviour of
carbon epoxy laminates
View Full Article top
Guy P.
Implementation of a multifunctional piezoelectric embedded
sensor for the health monitoring of the whole life cycle of a real composite
structure
View Full Article top
Gagnon P.
New Tooling Concept for Large Volume Production of Parts
Made of Continuous Fiber Thermoplastic Composites
View Full Article top
Galasso S.
ALL OXIDE CERAMIC MATRIC COMPOSITES FOR THERMOSTRUCTURAL
APPLICATIONS
View Full Article top
Galiotis C.
Assessment of Crack Shielding in Ceramic Matrix Composites
in the Presence of Large Scale Effects
View Full Article
An Experimental Micromechanical - Finite Element Assisted
-Approach into the Compressive Failure Mechanisms of Carbon Fibre Composites
View Full Article top
Gambaro C.
FRICTION STIR WELDING OF AN AA7005/Al2O3/10% REINFORCED
ALLOY
View Full Article top
Gamby D.
Influence of loading rate on transverse ply crack growth in
aeronautical CFRP laminates
View Full Article top
Gamstedt E. K.
Stiffness contribution of wood fibres to composite
materials
View Full Article
Sequence effects in block amplitude fatigue loading of
composite laminates
View Full Article top
Gao L.
Preparation and Properties of Cr2N-Al2O3 Nanocmposites
View Full Article top
Gaspar-Cunha A.
Optimisation of the Low-Shear Compounding of Carbon
Nanofibre/Polymer Composites
View Full Article top
Gatto A.
Planning and manufacturing a mould for Resin Transfer
Moulding
View Full Article top
Gdoutos E. E.
DEVELOPMENT OF A SMART COMPOSITE PATCH METHODOLOGY FOR THE
CONTINUOUS HEALTH MONITORING OF AIRCRAFT
REPAIRS
View Full Article
Failure Modes of Sandwich Structures
View Full Article top
Gerard J. F.
Processing and characterisation of Polyhedral oligomeric
silsesquioxanes (POSS®) nanocomposites
View Full Article top
Ghobarah A.
Analytical torsion model for strengthened concrete beams
View Full Article top
Ghonem H.
Interfacial Properties of a Sapphire Fiber / Alumina Matrix
Composite at Elevated Temperature
View Full Article top
Gigliotti M.
Internal Stresses Induced by Cyclical Environmental
Conditions in Laminated Composite Plates
View Full Article top
Giles A. R.
Design, Manufacture and Evaluation of Bending Control of
Carbon/Epoxy Composite Beams with Embedded SMA Wires
View Full Article top
Girardin E.
Finite element simulation and experimental determination of
residual stresses after extrusion process in Metal Matrix Composites
View Full Article top
Giraudo G.
A ligthweight 3-D Support Structure for Precise Tracking
System
View Full Article top
Glogar P.
Processing, properties, and performance of polysiloxane-derived
ceramic matrix in heat resistant composites reinforced with R-glass or fine
ceramic fibres
View Full Article top
Glorieux C.
IR nonlinear photothermal imaging in Carbon/Epoxy composite
materials: Experimental survey
View Full Article top
Gojny F. H.
Evaluation of the potential of carbon nanotubes for a
reinforcement of an epoxy matrix
View Full Article top
Goncalves S.
Mechanical Characterisation of Wool Fibres for Reinforcing
of Composite Materials
View Full Article top
Gonzalez C.
Fracture Tougness of Ti-6Al-4V/SiC Composites at Ambient
and Elevated Temperature
View Full Article top
Goodarzi A. H.
Optimal stacking sequence of laminated cylindrical panel
using generic algorithm
View Full Article top
Goossens H.
Nano-composites via solid-state modification for toughening
semi-crystalline polymers
View Full Article top
Gordić M.
EDGE EFFECT ON CARBON/EPOXY STRENGTH AND DELAMINATION OF
CARBON/EPOXY LAMINATE WITH DIFFERENT STACKING
SEQUENCE
View Full Article top
Grassi M.
Analysis of Z-fibre effect on the failure modes of a
composite rib
View Full Article top
Greco A.
Creep behavior of PP based composites for the automotive
industry
View Full Article top
Green A. K.
Composite Rib Development
View Full Article top
Greenhalgh E. S.
Modelling of Delamination and Debonding in Laminated
Composites using a Moving Mesh Approach
View Full Article top
Gregoriou V. G.
SPECTROSCOPIC AND MECHANICAL CHARACTERIZATION OF ISOTACTIC
AND SYNDIOTACTIC POLYPROPYLENE NANOCOMPOSITES
View Full Article top
Gromov A.
Composites of SWNT or carbon black and
melamine-formaldehyde with cellulose
View Full Article top
Grunevald Y. -H.
INSTRUMENTED TECHNOLOGICAL SPECIMEN (ITS): CURING PROCESS
AND MECHANICAL CHARACTERISATION USING EMBEDDED
FIBER BRAGG GRATINGS
View Full Article top
Gu P.
Fabrication of Carbon Nanotue-TiC Nanocomposites by Spark
Plasma Sintering
View Full Article top
Guadagnini M.
Curved non ferrous reinforcement for concrete structures
View Full Article top
Guild F.
Impact of Thick CFRP Panels: Near Free Edge Impact
View Full Article top
Guild F. J.
Finite Element Modelling of Crack Growth in Composites
View Full Article top
Guillen R.
A self-consistent approach for transient hygroscopic
stresses and moisture expansion coefficients of fiber-reinforced composites
View Full Article top
Gumula T.
Influence of curing conditions
of polysiloxane ceramic precursors on mechanical properties of ceramic matrix
composites
View Full Article top
Günther B.
Analysis of the Thermo-mechanical Fatigue Behaviour of
SiC-fibre reinforced Titanium Alloy (SCS-6/Ti-6242)
View Full Article top
Gutierrez E.
Structural design and testing of a composite wind turbine
tower module
View Full Article top
Gutiérrez-Solana F.
DETERMINATION OF LIMIT LOAD FATIGUE FAILURE OF FIBRE-GLASS
REINFORCED PA 6.6 COMPONENTS USING ENERGY CONSIDERATIONS
View Full Article top
H top
Holst S.
Modelling of the initial failure of CFRP structures by
partial discretisation: a micro/macro-mechanical approach of first ply failure
View Full Article top
Hadi I.
The effect of Thermal Cycling on the stiffness and Density
of the short Fiber Al2O3/WE54 Mg Alloy Composite
View Full Article top
Hadjichristidis N.
Polyolefin/Silicate Nanocomposites
View Full Article top
Hagstrand P.O.
Hybrid thermoplastic composite beam structures integrating
UD tows, stamped fabrics, and injection/compression moulding
View Full Article top
Hammami A.
THE VACUUM INFUSION MOLDING PROCESS FOR STRENGTHENING
CONCRETE STRUCTURES
View Full Article
Durability of FRP Strengthened Concrete Structures
View Full Article
Natural Fibers Reinforced Composites from Date Palm Fibers
View Full Article top
Han S.O.
Mechanical and Thermal Properties of Novel Silk/Poly(butylene
succinate) Biocomposites
View Full Article top
Haque A.
Stress Transfer in Carbon Nanotube Reinforced Polymer
Composites : An Experimental, Finite Element and Analytical Study
View Full Article top
Harada M.
Utilization of a rubber mat for the concrete caisson
structures as a friction-increasing material
View Full Article top
Hareeb S.
THE VACUUM INFUSION MOLDING PROCESS FOR STRENGTHENING
CONCRETE STRUCTURES
View Full Article
Durability of FRP Strengthened Concrete Structures
View Full Article top
Harmia T.
Structure and Properties of Long Glass Fibre Reinforced
Polyamide-66 Modified with Thermoset Resin
View Full Article top
Harrison P.
CURE AND RESIDUAL VOLATILE CLASSIFICATION OF AUTOMOTIVE
"CLASS A" PANELS VIA RTM
View Full Article
Simulation of Viscous Textile Composite Sheet Forming based
on a Unit Cell Energy Model
View Full Article top
Hayes S.A.
Photoelastic Measurement of Matrix Stress Field and
Interfacial Shear Stress in Single Glass Fibre Model Composites
View Full Article top
Henrat P.
Dimensional stability of multilayer printed circuit boards
: influence of the reinforcement
View Full Article top
Hermann T.
Hybrid thermoplastic composite beam structures integrating
UD tows, stamped fabrics, and injection/compression moulding
View Full Article top
Hine P. J.
THE HOT COMPACTION OF WOVEN POLYETHYLENE TEREPHTHALATE
MULTIFILAMENTS
View Full Article
FIBRE ORIENTATION STRUCTURES AND THEIR EFFECT ON THE CRACK
RESISTANCE OF AN INJECTION MOULDED TRANSVERSE
RIBBED PLATE
View Full Article top
Hinz S.
Damage evaluation of GlareÒ 4B under
interlaminar shear loading at elevated temperatures
View Full Article top
Hirayama A.
The effect of gamma and electron beam radiation on the
mechanical properties of thermosetting polymer and their composites
View Full Article top
Hoa S.V.
AUGMENTATION OF FRACTURE TOUGHNESS OF EPOXY USING
NANOPARTICLES
View Full Article top
Hogg P.J.
Assessment of a Novel Bondline Toughening Procedure for
Composite Vacuum Infusion In-Field
Repairs
View Full Article top
Hojo M.J.
Micromechanical Yielding and Failure of CF/Epoxy caused by
the Formation of Residual Stresses under Macroscopic Boundary Conditions
View Full Article top
Holmkvist A.
Energy absorption capability of low-cost composite
materials
View Full Article top
Hong S.J.
Assessment of Waste Landfill Application Properties of PVA
Geotextile/HDPE Geomembrane Composites
View Full Article top
Hron P.
Processing, properties, and performance of polysiloxane-derived
ceramic matrix in heat resistant composites reinforced with R-glass or fine
ceramic fibres
View Full Article top
Hu X. top
Halary J.
Carbon Nanotube-Polymer Composites for use as Remote
Strain-Sensor Coatings
View Full Article top
Hamdoun Z.
Influence of the drilling on the fatigue behaviour of
carbon epoxy laminates
View Full Article top
Harrison P.
CURE AND RESIDUAL VOLATILE CLASSIFICATION OF AUTOMOTIVE
"CLASS A" PANELS VIA RTM
View Full Article
Simulation of Viscous Textile Composite Sheet Forming based
on a Unit Cell Energy Model
View Full Article top
Hartikainen J.
Structure and Properties of Long Glass Fibre Reinforced
Polyamide-66 Modified with Thermoset Resin
View Full Article top
Hartley J. R.
Monitoring cure in glass fibre/vinyl ester pultrusions
View Full Article top
Hatta H.
Strength Improvement and Notch Insensitivity of
Carbon/Carbon Composites using ESPI-NDE
View Full Article top
Hay J. N.
ORGANIC-INORGANIC HYBRID NANOPARTICLES AS MODIFIERS FOR
POLYMER COMPOSITE MATRICES
View Full Article top
Hayri Ates B.
WEATHERING EFFECTS ON THE IMPACT, BULK AND SURFACE
PROPERTIES OF POLYPHENYLENE SULPHIDE (PPS) COMPOSITES
View Full Article top
Heffernan P.
Rapidly deployable, portable, GFRP VEHICLE Bridge
Development Project
View Full Article top
Heider D.
Embedded Sensor Based Health Monitoring System of a
Composite Bridge Deck
View Full Article top
Heintz J. M.
Electroless deposition of metal substrate
View Full Article top
Hemptenmacher J.
Analysis of the Thermo-mechanical Fatigue Behaviour of
SiC-fibre reinforced Titanium Alloy (SCS-6/Ti-6242)
View Full Article top
Higaki S.
Physical Properties of Carbon Nanotube/Polypropylene
Compounds
View Full Article top
Hivet G.
Meso-macro approach in simulation of very unbalanced
textile forming
View Full Article top
Hobbiebrunken T.
Modelling of the initial failure of CFRP structures by
partial discretisation: a micro/macro-mechanical approach of first ply failure
View Full Article
Micromechanical Yielding and Failure of CF/Epoxy caused by
the Formation of Residual Stresses under Macroscopic Boundary Conditions
View Full Article top
Hochard C.
Rupture prediction of woven ply laminated plate with an
open hole
View Full Article
Design of high rotation frequency composite tubes
View Full Article top
Hodgkinson J. M.
Application of a Lamp Wave Technique for the
Non-Destructive Inspection of Composite Structures
View Full Article
IMPACT DAMAGE IN COMPOSITE STRUCTURES MANUFACTURED USING
RESIN INFUSION UNDER FLEXIBLE TOOLING (RIFT) PROCESS
View Full Article top
Hogg P.
Effects of stitching parameters on the energy absorption of
flat composite plates
View Full Article top
Hojo M.
Modelling of the initial failure of CFRP structures by
partial discretisation: a micro/macro-mechanical approach of first ply failure
View Full Article
Effect of bending deformation on critical current in
Bi2223/Ag/Ag-alloy composite superconducting tapes
View Full Article
Post-tension strengthening via carbon fiber sheet for
existing steel bridge girders
View Full Article top
Hopgood P.
Investigation into the failure of open and filled holes in
CFRP laminates under biaxial loading conditions
View Full Article
Analysis of Z-fibre effect on the failure modes of a
composite rib
View Full Article top
Huang LiLi Y. D.
Calculation of water diffusion coefficient and dynamics in
site of adhesive/c-c composites joints
View Full Article top
Huber C.
Active Fibre Composites: Sensors and Actuators for Smart
Composites & Structures
View Full Article top
Hübner W. top
Huchette C.
A CRITERION BASED ON STRESS AND ENERGY FOR THE ONSET OF
TRANSVERSE CRACKING
View Full Article top
Hufenbach W.
Development of Bearing Material and High Performance
Bearings for Dry Applications Under Harsh Operating Conditions
View Full Article top
I top
Iannucci L.
IMPACT DAMAGE IN COMPOSITE STRUCTURES MANUFACTURED USING
RESIN INFUSION UNDER FLEXIBLE TOOLING (RIFT) PROCESS
View Full Article top
Imoto T.
Utilization of a rubber mat for the concrete caisson
structures as a friction-increasing material
View Full Article top
Ishai O.
Hygrothermal effects on interlaminar strength and cracking
of thick Graphite-Phenolic Laminates
View Full Article top
Itabashi M.
Comparison of shearing test methods for pultruded materials
View Full Article top
Ibanes C.
Morphology of PA6-nanocomposite fibres by means of ESEM
study of fracture surfaces
View Full Article top
Igolkine S.
A ligthweight 3-D Support Structure for Precise Tracking
System
View Full Article top
Ikeo Y.
The effect of gamma and electron beam radiation on the
mechanical properties of thermosetting polymer and their composites
View Full Article top
Ioelovich M.
STUDY OF NANO-PLASTICS CONTAINING FILLERS OF VARIOUS TYPES
View Full Article top
Irannejad H. R.
FE investigation of bond behaviour between smooth composite
FRP rods and concrete with the effects of environmental parameters
View Full Article top
Isopescu D.
ANALYSIS AND BEHAVIOUR OF SANDWICH PANNELS WITH
PROFILED METAL FACINGS UNDER TRANSVERSE LOAD
View Full Article top
Iuliano L.
Planning and manufacturing a mould for Resin Transfer
Moulding
View Full Article top
J top
Jager A.
Optimization of multi-composed materials: Application to
asphalt pavements
View Full Article top
Jain S.
Nano-composites via solid-state modification for toughening
semi-crystalline polymers
View Full Article top
Jedidi J.
Identification of 3D Moisture Diffusion Coefficients for
Carbon/Epoxy Laminates
View Full Article top
Jacquemin F.
Internal Stresses Induced by Cyclical Environmental
Conditions in Laminated Composite Plates
View Full Article
Identification of 3D Moisture Diffusion Coefficients for
Carbon/Epoxy Laminates
View Full Article
A self-consistent approach for transient hygroscopic
stresses and moisture expansion coefficients of fiber-reinforced composites
View Full Article top
Jakovics A.
APPLICATION OF PERMEABILITY NETWORK MODELL TO NON-CRIMP
FABRICS
View Full Article top
Jansons J.
EFFECT OF TEMPERATURE ON NONLINEAR CREEP OF SOME
THERMOPLASTS
View Full Article top
Jayet Y.
Implementation of a multifunctional piezoelectric embedded
sensor for the health monitoring of the whole life cycle of a real composite
structure
View Full Article top
Jendi Z.
Micromechanical analysis of strain rate effect on damage
evolution in discontinuous fibre composites
View Full Article top
Jennequin G.
LIGHTWEIGHT COMPOSITE PRESSURE HOUSINGS FOR MID-WATER AND
BENTHIC APPLICATIONS
View Full Article top
Jeon H. -Y.
Assessment of Waste Landfill Application Properties of PVA
Geotextile/HDPE Geomembrane Composites
View Full Article top
Jesson D.A
ORGANIC-INORGANIC HYBRID NANOPARTICLES AS MODIFIERS FOR
POLYMER COMPOSITE MATRICES
View Full Article top
Jevons M.
Use of a physically-based unit cell finite element model
for the simulation of drapability of non-crimp fabric materials
View Full Article top
Jiang H.
Synthesis of Novel Lignin-based Composite Materials Using
Cold-Plasma Technique
View Full Article top
Jiang H. Y.
Monte-Carlo Simulation to Fracture of Cross-ply Laminates
at Room and Low Temperature
View Full Article top
Johnson W. S.
Gamma Titanium Aluminide Matrix Composites: A Parametric
Study of Optimum Constituents
View Full Article top
Jones F. R.
Plasma Polymerisation for Controlling the Interfacial
Response in Advanced Polymer Fibre Matrix Composites
View Full Article
Mechanisms of Moisture absorption by cyanate ester modified
epoxy resin matrices: The reverse thermal effect
View Full Article
Photoelastic Measurement of Matrix Stress Field and
Interfacial Shear Stress in Single Glass Fibre Model Composites
View Full Article top
Jungmann H.
Thermoset Bonded Natural Fibre Prepregs - A new approach
for an eco-composite
View Full Article top
K top
Kunze K.
Development of Bearing Material and High Performance
Bearings for Dry Applications Under Harsh Operating Conditions
View Full Article top
Kalogiannakis G.
IR nonlinear photothermal imaging in Carbon/Epoxy composite
materials: Experimental survey
View Full Article top
Kalyanasundaram S.
Formability Characteristics of Polymer-Metal Laminates and
Random Fibre Based Fibre-Metal Laminates
View Full Article
Effect of Process Temperature and Blank-Holder Force on the
Forming of Fibre Metal Laminate Systems
View Full Article top
Kappl K.
Optimization of multi-composed materials: Application to
asphalt pavements
View Full Article top
Karama M.
Development of a Finite Element Analysis software for
composite materials structures based on a new exponential model in order to
incorporate the
effect of transverse shear stresses
View Full Article
Fatigue Damaging of Carbon/Epoxy Composite Plates with or
without a hole
View Full Article top
Kazilas M.C.
Monitoring cure in glass fibre/vinyl ester pultrusions
View Full Article top
Keisuke O.
Strength Improvement and Notch Insensitivity of
Carbon/Carbon Composites using ESPI-NDE
View Full Article top
Khaldjigitov A.
The numerical and mathematical modelling of elastic plastic
transversely isotropic materials
View Full Article top
Kishi H.
Adhesive properties of toughened epoxy resins with
pre-formed thermoplastic polymer particles
View Full Article
Damping properties of carbon-fiber reinforced epoxy
composites with viscoelastic interleaf films
View Full Article
The effect of gamma and electron beam radiation on the
mechanical properties of thermosetting polymer and their composites
View Full Article top
Kitada T.
Post-tension strengthening via carbon fiber sheet for
existing steel bridge girders
View Full Article top
Kobayashi S.
Nonlinear Mechanical Response of CFRP Laminates under
Off-Axis Tensile Loading
View Full Article top
Kolednik O.
The effect of the equal channel angular pressing on the
particle distribution and fracture properties of metal matrix composites
View Full Article
Local deformation processes and damage evolution in MMCs
View Full Article top
Kontou E.
Viscoplastic Response of Unidirectional Fiber Polymer
Composites
View Full Article top
Kosmidou T.V.
Prediction of the Mechanical Properties of FRP's by Means
of the Concept of Hybrid Interphase
View Full Article top
Kottar A.
X-Ray Computed Tomography characterising Carbon Fibre
Reinforced Composites
View Full Article top
Krasnikovs A.
Stiffness degradation in Non-Crimp fabric composite in
tension due to damage
View Full Article top
Kruch S.
Propagation of a matrix bridged crack in a SiC/Ti
composite: experiments and modelling
View Full Article top
Kumar R. R.
Intricacies in the Prediction of Intra laminar Fracture
Toughness of Multilayered Composites
View Full Article
A study on CBR Behaviour of Sand - Fly ash - Sodium
hydroxide Mixture
View Full Article top
Kurashiki T.
Estimation of a mechanical characterization for woven
fabric composites by FEM based on damage mechanics
View Full Article
On an estimation of the damping properties of woven fabric
composites
View Full Article top
Kaabi K.
Natural Fibers Reinforced Composites from Date Palm Fibers
View Full Article top
Kaddour A. S.
Spring-in measurements in U-channel made of AS4/8552
carbon/epoxy and effects of fibre volume fraction variation
View Full Article top
Kaiser C.
Failure Criteria for Non-Metallic Materials - Part I: Fibre
Reinforced Plastics
View Full Article
Failure Criteria for Non-Metallic Materials - Part
II:Ceramic Matrix Compsites
View Full Article top
Kalaitzidou K.
Effect of Processing on the Thermo-Mechanical and
Electrical Properties of Exfoliated Nano-Graphite Reinforced Polypropylene
View Full Article top
Kallimanis A.
Viscoplastic Response of Unidirectional Fiber Polymer
Composites
View Full Article top
Kalthoffc J. F.
IMPACT RESISTANCE MODIFICATION OF PEI REINFORCED WITH
CARBON FIBER TEXTILE AFTER MECHANICAL, HIGROTHERMAL, AND
HIGROTHERMAL-MECHANICAL EXPOSURE
View Full Article top
Kaminski M.
SENSITIVITY ANALYSIS FOR EFFECTIVE PROPERTIES OF PERIODIC
FIBER-REINFORCED COMPOSITES
View Full Article top
Kamiya T.
Study on Time Dependent Interfacial Failure in Single Fiber
Composites
View Full Article top
Kandilioti G.
SPECTROSCOPIC AND MECHANICAL CHARACTERIZATION OF ISOTACTIC
AND SYNDIOTACTIC POLYPROPYLENE NANOCOMPOSITES
View Full Article top
Kanny K.
CYCLIC CHARACTERISTICS OF X-LINKED AND LINEAR CORED
STRUCTURES AT ELEVATED TEMPERATURES
View Full Article top
Kapelewski J.
Coherent Stoneley-wave scattering by a composite-like
interface
View Full Article top
Karad S. K.
Mechanisms of Moisture absorption by cyanate ester modified
epoxy resin matrices: The reverse thermal effect
View Full Article top
Karalekas D.
Study of debonding development in fibrous metal matrix
composites
View Full Article top
Karatasos K.
Dynamics in intercalated polymer-clay nanocomposites
View Full Article top
Karger-Kocsis J.
Microstructural Characterisations and Mechanical Properties
of Compatibilized Polyamide 6/Polypropylene/Organoclay Nanocomposites
View Full Article top
Kastritseas C.
Damage Characterisation of Thermally-Shocked Woven-Fibre-Reinforced
Ceramic Matrix Composites
View Full Article top
Katsikadelis J. T.
3D-STRESS ANALYSIS OF ANISOTROPIC PLATES USING A
BOUNDARY-ONLY HYBRID METHOD
View Full Article top
Kawada H.
Study of PMCs on Stress-Corrosion Cracking (Effect of
Interfacial Debonding Energy on Matrix Cracking)
View Full Article
Study on Time Dependent Interfacial Failure in Single Fiber
Composites
View Full Article top
Kaya C.
FRACTURE BEHAVIOUR OF MULLITE FIBRE REINFORCED MULLITE
MATRIX COMPOSITES UNDER QUASI-STATIC AND BALLISTIC
IMPACT LOADING
View Full Article top
Kelly A.
Controlling thermal expansion by use of composite materials
View Full Article top
Khemiri N.
Analysis of Z-fibre effect on the failure modes of a
composite rib
View Full Article top
Khoei A. R.
FE investigation of bond behaviour between smooth composite
FRP rods and concrete with the effects of environmental parameters
View Full Article top
Khudazarov R.
The numerical and mathematical modelling of elastic plastic
transversely isotropic materials
View Full Article top
Kiiko V. M.
High temperature creep of oxide-fibre/metal-matrix
composites under variable loading
View Full Article
High temperature creep of single crystalline and eutectic
oxide fibres produced by internal crystallisation method
View Full Article top
Kikukawa H.
Proof of Concept for New Composite Structures of Aircraft
View Full Article top
Kilpatrick I.
LIGHTWEIGHT COMPOSITE PRESSURE HOUSINGS FOR MID-WATER AND
BENTHIC APPLICATIONS
View Full Article top
Kimpara I.
Finite Element Analysis of Fractures in Natural Plant Cell
Structures
View Full Article top
Kingshott P.
Micromechanical investigation of the influence of fibre
sizings on the crack bridging behaviour of glass fibre composites
View Full Article top
Kiyota G.
Study on Time Dependent Interfacial Failure in Single Fiber
Composites
View Full Article top
Klein P.
Friction of Polymer Composites in Liquid Hydrogen Media
View Full Article top
Kobiki A.
Study of PMCs on Stress-Corrosion Cracking (Effect of
Interfacial Debonding Energy on Matrix Cracking)
View Full Article top
Kocov A.
CORRELATION BETWEEN PRODUCTION'S PROCESS PARAMETERS OF
GLASS-FIBER BASED COMPOSITE MATERIALS WITH ITS
MECHANICAL PROPERTIES
View Full Article top
Kokkinos F. T.
3D-STRESS ANALYSIS OF ANISOTROPIC PLATES USING A
BOUNDARY-ONLY HYBRID METHOD
View Full Article top
Kolchin A. A.
High temperature creep of single crystalline and eutectic
oxide fibres produced by internal crystallisation method
View Full Article top
Kollar L.
Buckling of FRP beams and columns
View Full Article top
Kolsters H.
Finite element modelling and dynamic analysis of
laser-welded sandwich panels
View Full Article top
Koning C.
Processing of Carbon Nanotube Composites using Latex
Technology
View Full Article top
Korakianiti A.
SPECTROSCOPIC AND MECHANICAL CHARACTERIZATION OF ISOTACTIC
AND SYNDIOTACTIC POLYPROPYLENE NANOCOMPOSITES
View Full Article top
Kornmann X.
A study on CBR Behaviour of Sand - Fly ash - Sodium
hydroxide Mixture
View Full Article top
Kostopoulos V.
Fracture Behavior
and Damage Characterization of SiC/Glass ceramic composites
View Full Article
Assessment of Crack Shielding in Ceramic Matrix Composites
in the Presence of Large Scale Effects
View Full Article
Anisotropic Damage modelling of composite materials using
ultrasonic stiffness matrix measurements
View Full Article top
Koundouros M.
Predicting the Compressive Failure Load of a CFRP Stiffened
Panel Using the Seven-Point Bending Test
View Full Article top
Koyanagi J.
Study on Time Dependent Interfacial Failure in Single Fiber
Composites
View Full Article top
Krevaikas T.
AUTOMATED DESIGN OF FRP-STRENGTHENED MASONRY
View Full Article top
Kuebler J.
Thermomechanical properties of interpenetrating graphite/aluminium
composites produced by indirect squeeze casting process
View Full Article top
Kueseng K.
Investigation of Hygrothermal Ageing Phenomena in Model
Composites by Raman Spectroscopy
View Full Article top
Kuhnel E.
Failure Criteria for Non-Metallic Materials - Part I: Fibre
Reinforced Plastics
View Full Article top
Kurlov V. N.
High temperature creep of single crystalline and eutectic
oxide fibres produced by internal crystallisation method
View Full Article top
Kuwata M.
Damping properties of carbon-fiber reinforced epoxy
composites with viscoelastic interleaf films
View Full Article top
Krishnamurthy S.
Health Monitoring of Composite Structures Using a Novel
Fibre Optic Acoustic Emission Sensors
View Full Article top
L top
Lafarie-Frenot M.C.
Influence of loading rate on transverse ply crack growth in
aeronautical CFRP laminates
View Full Article
Experimental evidence of coupling between matrix cracking
and oxidation during thermal ageing of C/epoxy laminates
View Full Article top
Lagache M.
Performances prediction for a structure with piezoelectric
composite inserts
View Full Article top
Lahm M.
Thermoset Bonded Natural Fibre Prepregs - A new approach
for an eco-composite
View Full Article top
Laksimi A.
Simulation of acoustic emission sources in composite plates
View Full Article top
Landa M.
Recovery stress generation by shape memory alloy
polycrystalline elements
View Full Article top
Lauritzen R.
Failure analysis of filament wound composite to metal
joints using Puck's failure criterion
View Full Article top
Lee S.G.
Mechanical and Thermal Properties of Novel Silk/Poly(butylene
succinate) Biocomposites
View Full Article top
Lee S.H.
Nanostructured nonosocyanate polyurethane composites
View Full Article top
Lee S.M.
Mechanical and Thermal Properties of Novel Silk/Poly(butylene
succinate) Biocomposites
View Full Article top
Lemstra P.J.
Nano-composites via solid-state modification for toughening
semi-crystalline polymers
View Full Article top
Lessard L.
Design of a Carbon Fiber Bicycle Stem Using an Internal
Bladder and Resin Transfer Molding
View Full Article top
Lindner M.
Active Fibre Composites: Sensors and Actuators for Smart
Composites & Structures
View Full Article top
Lindström M.
Stiffness contribution of wood fibres to composite
materials
View Full Article top
Lloyd P.
Design, Manufacture and Evaluation of Bending Control of
Carbon/Epoxy Composite Beams with Embedded SMA Wires
View Full Article top
Lomov S.V.
Estimation of a mechanical characterization for woven
fabric composites by FEM based on damage mechanics
View Full Article
Micro - Macro structural analysis of textile composite
parts
View Full Article top
Lopresto V.
FRACTURE SURFACES OF CFRP LAMINATES STATICALLY LOADED AT
THE CENTRE
View Full Article top
Lovell P.A.
Carbon Nanotube-Polymer Composites for use as Remote
Strain-Sensor Coatings
View Full Article top
Ludford N.
Environmental Degradation of a Continuous Oxide Fibre-Reinforced
Oxide Matrix Composite
View Full Article top
Luxner M.
Thermo-Mechanically Interacting Composite Pipes Optimised
by Genetic Algorithms
View Full Article top
Lackner R.
Optimization of multi-composed materials: Application to
asphalt pavements
View Full Article top
Ladeveze P.
Relationship between the micro-and mesomechanics of
laminates under plane and out-of-plane macro loading
View Full Article top
Lafarie-Frenot M. C.
Experimental evidence of coupling between matrix cracking
and oxidation during thermal ageing of C/epoxy laminates
View Full Article
Influence of loading rate on transverse ply crack growth in
aeronautical CFRP laminates
View Full Article top
Lagattu F.
Influence of natural fibre reinforcement on microstructural
and mechanical properties of polypropylene
View Full Article top
Lake M.L.
Optimisation of the Low-Shear Compounding of Carbon
Nanofibre/Polymer Composites
View Full Article top
Lam T. Q.
Influence of natural fibre reinforcement on microstructural
and mechanical properties of polypropylene
View Full Article top
Lamon J.
RANDOM LOCAL LOAD SHARING IN MULTIFILAMENT BUNDLES :
MODELLING AND INFLUENCE ON ULTIMATE FAILURE COMPOSITES
View Full Article
A PROBABILISTIC-STATISTICAL APPROACH TO THE ULTIMATE
FAILURE OF TEXTILE CERAMIC MATRIX COMPOSITES
View Full Article top
Langham M. J.
Experimental study of Resin Infusion under Flexible Tool
(RIFT)
View Full Article top
Langkamp A.
Failure Behaviour of Textile Reinforced Composites under
Dynamic Loading
View Full Article
Active Vibration Control of Reinforced and non-Reinforced
Lightweight Structures
View Full Article
Development of Bearing Material and High Performance
Bearings for Dry Applications Under Harsh Operating Conditions
View Full Article top
Larosa M.S.
Experimental and numerical determination of the mechanical
properties of multi-axial multi-ply composites
View Full Article top
Lascoup B.
Effect of structural parameters on mechanical behaviour of
stitched sandwiches
View Full Article top
Lataillade J. -L.
Influence of the drilling on the fatigue behaviour of
carbon epoxy laminates
View Full Article top
Laurin F.
A multiscale progressive failure criterion for composite
materials
View Full Article top
Lawecka M.
View Full Article top
Lawlor V. P.
Effects of Variable Clearance in Multi-Bolt Composite
Joints on Load Distribution and Quasi-Static Strength
View Full Article
Effects of Variable Clearance in Multi-Bolt Composite
Joints on Fatigue Life
View Full Article top
Lazarev J.
CORRELATION BETWEEN PRODUCTION'S PROCESS PARAMETERS OF
GLASS-FIBER BASED COMPOSITE MATERIALS WITH ITS
MECHANICAL PROPERTIES
View Full Article top
Le Pagne D.
Interfacial Properties of a Sapphire Fiber / Alumina Matrix
Composite at Elevated Temperature
View Full Article top
Lebrun G.
New Tooling Concept for Large Volume Production of Parts
Made of Continuous Fiber Thermoplastic Composites
View Full Article top
Lee J. H.
Modelling of Low Velocity Impact Damage in Laminated
Composites
View Full Article top
Lekakou C.
Experimental study of Resin Infusion under Flexible Tool
(RIFT)
View Full Article
Optical fibre sensor for monitoring flow and resin curing
in composites manufacturing
View Full Article
A nano-micro-composite sensor for the measurement of flow
shear stress
View Full Article top
Leone C.
Solution impregnation of natural fibres/ABS matrix
composites
View Full Article
New resin Film infusion process for manufacture of large
composite structures
View Full Article top
Leonelli C.
GLASS MATRIX COMPOSITE FOAMS CONTAINING METALLIC FIBRES
PRODUCED BY MICROWAVE HEATING
View Full Article top
Leonowicz M.
Polymer Matrix Nanocomposites Exhibiting Magnetic
Properties
View Full Article top
Leroy F. -H.
A multiscale progressive failure criterion for composite
materials
View Full Article top
Lester E.
CURE AND RESIDUAL VOLATILE CLASSIFICATION OF AUTOMOTIVE
"CLASS A" PANELS VIA RTM
View Full Article top
Leveque D.
A CRITERION BASED ON STRESS AND ENERGY FOR THE ONSET OF
TRANSVERSE CRACKING
View Full Article top
Levesque M.
Mechanical behaviour predictions of nonlinear viscoelastic
composite materials by a homogenisation of random mixtures approach
View Full Article top
Li C.
Modeling and Characterization of Carbon Nanotubes and their
Composites
View Full Article top
Li F.
Fatigue failure mechanisms of single-walled carbon nanotube
ropes
View Full Article top
Li Y.
Preparation and Properties of Cr2N-Al2O3 Nanocmposites
View Full Article top
Liang Y.-C.
Optimal Design of The Swept-Forward Wing in Composite
Materials
View Full Article top
Licciulli A.
ALL OXIDE CERAMIC MATRIC COMPOSITES FOR THERMOSTRUCTURAL
APPLICATIONS
View Full Article top
Licea-Jimenez L.
Composites of SWNT or carbon black and
melamine-formaldehyde with cellulose
View Full Article top
Lila B.
Coherent Stoneley-wave scattering by a composite-like
interface
View Full Article top
Liu G.
Fabrication of Carbon Nanotue-TiC Nanocomposites by Spark
Plasma Sintering
View Full Article top
Liu W.
AUGMENTATION OF FRACTURE TOUGHNESS OF EPOXY USING
NANOPARTICLES
View Full Article top
Livingstone F.
LIGHTWEIGHT COMPOSITE PRESSURE HOUSINGS FOR MID-WATER AND
BENTHIC APPLICATIONS
View Full Article top
Llorca J.
COMPUTATIONAL MODELING OF DEFORMATION AND DAMAGE IN
PARTICLE-REINFORCED COMPOSITES
View Full Article
Fracture Tougness of Ti-6Al-4V/SiC Composites at Ambient
and Elevated Temperature
View Full Article top
Loendersloot R.
Permeability Prediction of Non-Crimp Fabrics Based on a
Geometric Model
View Full Article top
Long A.
Flow characterisation for partially impregnated prepregs
View Full Article top
Long A. C.
Predictive modelling of processing and performance
properties for textile composite unit cells: current status and perspectives
View Full Article
Dependence of Permeability Variations on the Textile
Structure
View Full Article
Simulation of Viscous Textile Composite Sheet Forming based
on a Unit Cell Energy Model
View Full Article top
Lord S. J.
Modelling of Delamination and Debonding in Laminated
Composites using a Moving Mesh Approach
View Full Article top
Lorrain B.
Fatigue Damaging of Carbon/Epoxy Composite Plates with or
without a hole
View Full Article top
Loutas T.
Fracture Behavior and Damage Characterization of SiC/Glass
ceramic composites
View Full Article top
Lubineau G.
Relationship between the micro-and mesomechanics of
laminates under plane and out-of-plane macro loading
View Full Article top
Lundstrom S.
APPLICATION OF PERMEABILITY NETWORK MODELL TO NON-CRIMP
FABRICS
View Full Article top
Lyckegaard A.
Localised Effects in Striuctural Sandwich Panels: Practical
Occurrence, analysis and Design
View Full Article top
Lyoo W. -S.
Assessment of Waste Landfill Application Properties of PVA
Geotextile/HDPE Geomembrane Composites
View Full Article top
M top
Magalhães P.H.
Rate-Dependent Mechanical Behavior
of CFRP Laminates Under Compression Loading
View Full Article top
Manni O.
Recycling of PP-based sandwich panels with continuous
fibers composite skins
View Full Article top
Manoharan P.D.
A study on CBR Behaviour of Sand - Fly ash - Sodium
hydroxide Mixture
View Abstract (Full article not available) top
Mantic V.
Micromechanical aspects of the inter-fibre failure in
fibrous composite materials under bi-axial loads
View Full Article
Evaluation of generalized stress intensity factors in
anisotropic elastic multimaterial corners
View Full Article
An analysis of transversal and delamination cracks in
0o/90o symmetric laminates by BEM
View Abstract (Full article not available) top
Martinez N.
Corrosion behaviour in NaCl
solutions of AMCs: material and test parameters
influence
View Full Article
On the precipitation-hardening behaviour of ceramic
reinforced AA6061 composites
View Abstract (Full article not available) top
Masaru
Zako
On an estimation of the damping properties of woven
fabric composites
View Full Article top
Mathieu O.
Evolution of the exfoliation of lamellar materials during
polymerisation of polyamide-6
View Full Article top
Matsuda S.
Adhesive properties of toughened epoxy resins with
pre-formed thermoplastic polymer particles
View Full Article
Damping properties of carbon-fiber reinforced epoxy
composites with viscoelastic interleaf films
View Full Article
The effect of gamma and electron beam radiation on the
mechanical properties of thermosetting polymer and their composites
View Full Article top
Mayama M.
Utilization of a rubber mat for the concrete caisson
structures as a friction-increasing material
View Full Article top
Mayevskaya O.I.
Epoxy composites hardened by phosphorus carbon
fibers. Influence of thermal cycling on thermal
properties
View Full Article top
McCartney L.N.
Controlling thermal expansion by use of composite
materials
View Full Article top
McHugh P.
Finite element simulation and experimental determination
of residual stresses after extrusion process in Metal Matrix Composites
View Full Article top
Mechraoui S.
Simulation of acoustic emission sources in composite
plates
View Abstract (Full article not available) top
Michaud V.
Effect of fibre sizing on sheet moulding compounds
rheology
View Full Article top
Moret M.
The decoded model of
transcrystallinity in carbon and aramid fibers
reinforced nylon 66 composites by Synchrotron study
View Abstract (Full article not available) top
Mackintosh A. R.
Development of novel urethane composites for
vibrational control
View Full Article top
Madjoudj-Guessasma N.
Simulation of acoustic emission sources in composite
plates
View Abstract (Full article not available) top
Maffezzoli A.
ALL OXIDE CERAMIC MATRIC COMPOSITES FOR THERMOSTRUCTURAL
APPLICATIONS
View Abstract (Full article not available)
Recycling of PP-based sandwich panels with continuous
fibers composite skins
View Full Article
Creep behavior of PP based
composites for the automotive industry
View Full Article top
Mahfuz H.
CYCLIC CHARACTERISTICS OF X-LINKED AND LINEAR CORED
STRUCTURES AT ELEVATED TEMPERATURES
View Full Article top
Maire E.
X-RAY TOMOGRAPHIC INVESTIGATION OF STOCHASTIC DAMAGE IN
POLYMER COMPOSITES
View Abstract (Full article not available) top
Maire
J. -F.
A multiscale progressive
failure criterion for composite materials
View Full Article top
Maistros G.
Design of dielectric sensing and measurement system for
the monitoring of the cure process in composite materials
View Abstract (Full article not available) top
Malchère A.
Morphology of PA6-nanocomposite fibres by means of ESEM
study of fracture surfaces
View Full Article top
Manolache S.
Synthesis of Novel Lignin-based Composite Materials Using
Cold-Plasma Technique
View Abstract (Full article not available) top
Månson J. A.-E.
Hybrid thermoplastic composite beam structures
integrating UD tows, stamped fabrics, and injection/compression moulding
View Full Article
Effect of fibre sizing on sheet moulding compounds
rheology
View Full Article top
Marinucci G.
Microstructural analysis in
asymmetric and non-balanced composite cylinders damaged by internal pressure
View Full Article top
Marioli-Riga Z.
DEVELOPMENT OF A SMART COMPOSITE PATCH METHODOLOGY FOR
THE CONTINUOUS HEALTH MONITORING OF AIRCRAFT REPAIRS
View Full Article top
Mark Hughes
Carbon Nanotube-Conducting
Polymer Nanocomposites
View Abstract (Full article not available) top
Markovic D.
EDGE EFFECT ON CARBON/EPOXY STRENGTH AND DELAMINATION OF
CARBON/EPOXY LAMINATE WITH DIFFERENT STACKING SEQUENCE
View Abstract (Full article not available) top
Marom G.
The decoded model of
transcrystallinity in carbon and aramid fibers
reinforced nylon 66 composites by Synchrotron study
View Abstract (Full article not available) top
Marques A. T.
Mode II fracture toughness of glass/epoxy
multidirectional laminates
View Full Article
Smart Composite Plates for Health Monitoring of a Boat
Structure
View Full Article
Fatigue Behaviour of Reinforced Concrete Beam
Strengthened with a CFRP Reinforced System
View Full Article
THE USE OF NANOMAGNETIC FLUIDS TO ENHANCE THE PRODUCTION
OF COMPOSIT PARTS COMPONENTS MADE BY RTM
View Full Article top
Marsal D.
Relationship between the micro-and
mesomechanics of laminatesunder plane and
out-of-plane macro loading
View Full Article top
Marzoli L. M.
FRICTION STIR WELDING OF AN AA7005/Al2O3/10% REINFORCED
ALLOY
View Full Article top
Masenelli-Varlot K.
Morphology of PA6-nanocomposite fibres by means of ESEM
study of fracture surfaces
View Full Article
Evolution of the exfoliation of lamellar materials during
polymerisation of polyamide-6
View Full Article top
Mathias J. -D.
Optimization of composite patches with a genetic
algorithm
View Full Article
A two-dimensional approach to compute shear stresses in
bonded composite patches
View Full Article top
Matsumoto K.
On an estimation of the damping properties of woven
fabric composites
View Full Article top
Matsunaga K.
On an estimation of the damping properties of woven
fabric composites
View Full Article top
Mattsson D.
Stiffness degradation in Non-Crimp fabric composite in
tension due to damage
View Abstract (Full article not available) top
McCarthy M. A.
Effects of Variable Clearance in Multi-Bolt Composite
Joints on Load Distribution and Quasi-Static Strength
View Full Article
Effects of Variable Clearance in Multi-Bolt Composite
Joints on Fatigue Life
View Full Article top
Medina L.
Thermoset Bonded Natural Fibre Prepregs -A new approach
for an eco-composite
View Full Article top
Megnis M.
Life predictions of long fiber composites in extreme
environmental conditions using damage evolution approach
View Abstract (Full article not available) top
Meraghni F.
IDENTIFICATION OF ELASTIC STIFFNESS AND DAMAGE MODEL FOR
ANISOTROPIC COMPOSITE MATERIALS BY THE VIRTUAL FIELDS METHOD
View Full Article
Micromechanical analysis of strain rate effect on damage
evolution in discontinuous fibre composites
View Full Article top
Merhi D.
Effect of fibre sizing on sheet moulding compounds
rheology
View Full Article top
Michaux A.
Thermomechanical properties of CVI-processed
Si-B-C based carbides as derived from the
behavior of carbon fiber-reinforced
microcomposites
View Full Article top
Mileiko S. T.
High temperature creep of oxide-fibre/metal-matrix
composites under variable loading
View Full Article
High temperature creep of single crystalline and eutectic
oxide fibres produced by internal crystallisation method
View Full Article top
Milicka K.
Directional creep behaviour of magnesium matrix
composites reinforced by alumina fibres
View Full Article
Influence of matrix composition on creep of
aluminium-based composites
View Full Article top
Minay E. J.
GLASS MATRIX COMPOSITE FOAMS CONTAINING METALLIC FIBRES
PRODUCED BY MICROWAVE HEATING
View Full Article top
Minni J. -C.
Dimensional stability of multilayer printed circuit
boards : influence of the reinforcement
View Full Article top
Mishnaevsky L.
Jr.
3D Mesomechanical Simulation
of Damage Evolution in Particle Reinforced Composites
View Abstract (Full article not available) top
Mistou S.
Development of a Finite Element Analysis software for
composite materials structures based on a new exponential model in order to
incorporate the effect of transverse shear stresses
View Full Article top
Mohd
Ishak Z.A.
Microstructural
Characterisations and Mechanical Properties of
Compatibilized Polyamide 6/Polypropylene/Organoclay
Nanocomposites
View Full Article top
Monnier T.
Implementation of a multifunctional piezoelectric
embedded sensor for the health monitoring of the whole life cycle of a real
composite structure
View Full Article top
Montagnier O.
Design of high rotation frequency composite tubes
View Full Article top
Monti G.
Mechanics of shear FRP-strengthening of RC beams C136
View Full Article top
Morais J. L.
Rate-Dependent Mechanical Behavior
of CFRP Laminates Under Compression Loading
View Full Article top
Moreno H. H.
Precise Positioning of Unit Cells and Embedded
Instrumentation for Fabrication and Pressure Testing of Filament Wound Tubes
View Full Article top
Moriconi C.
AUTHOMATISATION OF DYNAMIC ELECTRONIC SPECKLE PATTERN
INTERFEROMETRY MEASUREMENTS IN APPLICATION
TO DEFECT DETECTION
View Abstract (Full article not available) top
Mosse L.
Formability Characteristics of Polymer-Metal Laminates
and Random Fibre Based Fibre-Metal Laminates
View Full Article
Effect of Process Temperature and Blank-Holder Force on
the Forming of Fibre Metal Laminate Systems
View Full Article top
Mouillet J. B.
Development of a new finite element for composite
delamination analysis
View Full Article top
Mulle M.
INSTRUMENTED TECHNOLOGICAL SPECIMEN (ITS): CURING PROCESS
AND MECHANICAL CHARACTERISATION USING EMBEDDED FIBER BRAGG GRATINGS
View Full Article top
Muller M.
Creep behaviour of reinforced concrete beams strengthened with composite plates
View Abstract (Full article not available) top
Mullins G.
Issues Related to the FRP Repair of Corroded
Prestressed Piles
View Abstract (Full article not available) top
Murakami A.
A miniaturized post-impact compression test for curved
composites
View Full Article
Adhesive properties of toughened epoxy resins with
pre-formed thermoplastic polymer particles
View Full Article
Damping properties of carbon-fiber reinforced epoxy
composites with viscoelastic interleaf films
View Full Article
The effect of gamma and electron beam radiation on the
mechanical properties of thermosetting polymer and their composites
View Full Article top
Musardo C.
Creep behavior of PP based
composites for the automotive industry
View Full Article top
N top
Nakamura M.
Effect of bending deformation on critical current in
Bi2223/Ag/Ag-alloy composite superconducting tapes
View Full Article top
Naskar A. K.
Carbon Fibers from Novel
Precursors: Melt-Processible PAN
Terpolymers and UV-Assisted Stabilization Routes
View Full Article top
Neagu R. C.
Stiffness contribution of wood fibres to composite
materials
View Full Article top
Nicoletto G.
Stiffness contribution of wood fibres to composite
materials
View Full Article
Electrical Resistance Methodology for Damage Monitoring
in Composite Materials: Applications and Results
View Full Article top
Noguchi H.
Fatigue Characteristics of Hybrid Composites with
Non-Woven Carbon Tissue
View Full Article top
Novák V.
Recovery stress generation by shape memory alloy
polycrystalline elements
View Full Article top
Nunes J. P.
Production of GF/PP Woven Fabrics from Powder Coated
Thermoplastic Matrix Towpregs
View Full Article top
Nakanishi Y.
On an estimation of the damping properties of woven
fabric composites
View Full Article top
Namiki H.
Post-tension strengthening via carbon fiber sheet for
existing steel bridge girders
View Full Article top
Natividad E.
Electroless deposition of
metal substrate
View Full Article top
Néder Z.
FE MODELLING OF WEAR MECHANISMS OF CF/PEEK COMPOSITES
View Full Article top
Neocleous K.
Probabilistic material partial safety factors for FRP
reinforcement
View Full Article top
Neser G.
REGARDING THE RESULTS OF ULTIMATE STRENGTH TESTS OF GRP
CONSISTING THE STITCHED MULTILAYER ANGLE LAMINAS USED AS A BOATBUILDING
MATERIAL
View Full Article top
Nguyen T. H.
Influence of loading rate on transverse ply crack growth
in aeronautical CFRP laminates
View Full Article top
Niakas N.
Design of dielectric sensing and measurement system for
the monitoring of the cure process in composite materials
View Full Article top
Nicolais L.
Numerical simulation and Experimental characterization of
RIFT process
View Full Article top
Nishino M.
Nonlinear Analysis for Monitoring Bonded Patch
Delamination
View Full Article top
Nishiyabu K.
Physical Properties of Carbon
Nanotube/Polypropylene Compounds
View Full Article top
Nogués F.
Mechanical behaviour in HDPE-tyre reused Rubber
Composites. Effect of chemical modification
View Full Article top
Nordlund M.
APPLICATION OF PERMEABILITY NETWORK MODELL TO NON-CRIMP
FABRICS
View Full Article top
Novais F.
Production of GF/PP Woven Fabrics from Powder Coated
Thermoplastic Matrix Towpregs
View Full Article top
Novikov V. V.
VISCOELASTIC PROPERTIES OF INHOMOGENEOUS NANOCOMPOSITES
View Full Article top
Novo C.
Smart Composite Plates for Health Monitoring of a Boat
Structure
View Full Article top
Nóvoa P.J.
THE USE OF NANOMAGNETIC FLUIDS TO ENHANCE THE PRODUCTION
OF COMPOSIT PARTS COMPONENTS MADE BY RTM
View Full Article top
Nwabuzor A.
The Development of the Resin Infusion between Double
Flexible Tooling Process: Implementation of UV
Curing
View Full Article top
Nylinder A.
Energy absorption capability of low-cost composite
materials
View Full Article top
O top
Obst A.
Failure Criteria for Non-Metallic Materials - Part I:
Fibre Reinforced Plastics
View Full Article
Failure Criteria for Non-Metallic Materials - Part
II:Ceramic Matrix
Compsites
View Full Article top
Ochi S.
Characterization of high-strength cross-ply "green"
composites
View Full Article top
Ochia S.
Effect of bending deformation on critical current in
Bi2223/Ag/Ag-alloy composite superconducting tapes
View Full Article
Modelling of the initial failure of CFRP structures by
partial discretisation: a micro/macro-mechanical
approach of first ply failure
View Full Article
Micromechanical Yielding and Failure of CF/Epoxy caused
by the Formation of Residual Stresses under Macroscopic Boundary Conditions
View Full Article top
Okabe Y.
Quantitative Measurement of Delamination Growth in
Composite Laminates with Small-Diameter Fiber Bragg Grating Sensors
View Full Article top
Okoli O.I
The Development of the Resin Infusion between Double
Flexible Tooling Process: Implementation of UV Curing
View Full Article top
Oldenbo M.
Inelastic behavior of
viscoelastic SMC composites with micro damage
View Full Article top
Olivier P.
Process-induced stresses and their
influence upon some mechanical properties of carbon / epoxy laminates.
Part 2 : Study by acoustic emission
View Full Article top
Olsen T.
Failure analysis of filament wound composite to metal
joints using Puck's failure criterion
View Full Article top
Ogale A. A.
Carbon Fibers from Novel
Precursors: Melt-Processible PAN
Terpolymers and UV-Assisted Stabilization Routes
View Full Article top
Ogihara S.
Nonlinear Mechanical Response of CFRP Laminates under
Off-Axis Tensile Loading
View Full Article top
Ogin S. L.
RESPONSE OF A FBG SENSOR
TO MATRIX CRACK DEVELOPMENT
View Full Article
SENSITIVITY OF AN EMBEDDED POLARIMETRIC SENSOR BASED ON
PANDA FIBRE
View Full Article
Determination of the the
strain-optical parameters for a polarimetric
optical sensor embedded in a composite
View Full Article top
Ohgi J.
The Effect of Alkali Treatment on the Physical and
Mechanical Properties of Curaua Fibres
View Full Article top
Oprisan G.
ANALYSIS AND BEHAVIOUR OF
SANDWICH PANNELS WITH PROFILED METAL FACINGS UNDER TRANSVERSE LOAD
View Full Article top
Osborne D. J.
Interfacial Properties of a Sapphire Fiber / Alumina
Matrix Composite at Elevated Temperature
View Full Article top
Oya
N.
Physical Properties of Carbon
Nanotube/Polypropylene Compounds
View Full Article top
Övecoglu M. L.
Microstructure and mechanical properties of ceramic
matrix composites (CMCs) from polysiloxane and
inert / active fillers
View Full Article top
Ozasa H.
Post-tension strengthening via carbon fiber sheet for
existing steel bridge girders
View Full Article top
P top
Pailler R.
Influence of PAN-based carbon fibers
surface properties on the interfacial bonding to a
phenolic matrix
View Full Article
Thermomechanical properties of CVI-processed
Si-B-C based carbides as derived from the
behavior of carbon fiber-reinforced
microcomposites
View Full Article top
Paipetis A.
Anisotropic Damage modelling of composite materials
using ultrasonic stiffness matrix
measurements
View Full Article top
Papadakis N.
Relation comparison methodologies of the primary and
secondary frequency components of acoustic events obtained from thermoplastic
composite laminates under tensile stress
View Full Article
A methodology for the identification of tensile failure
mode types in thermoplastic composite laminates by means of acoustic emission
monitoring
View Full Article top
Papadrakakis M.
A stochastic approach to the fibre micro-buckling problem
in layered composites with interfacial defects
View Full Article top
Papazoglou V.
Design Buckling Curves for Clamped Orthotropic Laminated
Plates
View Full Article
LIGHTWEIGHT COMPOSITE PRESSURE HOUSINGS FOR MID-WATER AND
BENTHIC APPLICATIONS
View Full Article top
Pappas Y. Z.
A New Approach of Anisotropic Damage Modelling by the
Application of Pattern Recognition Methodologies in NDT Data
View Full Article
Anisotropic Damage modelling of composite materials using
ultrasonic stiffness matrix measurements
View Full Article top
Pavier
M.
Impact of Thick CFRP Panels: Near Free Edge Impact
View Full Article top
Papanicolaou G. C.
Prediction of the Mechanical Properties of
FRP's by Means of the Concept of Hybrid
Interphase
View Full Article top
Pagounis E.
Magnetic Shape Memory alloys and composites: A new way to
generate motion and force
View Full Article top
Pahr
D. H.
Investigations of Perforated Laminates in the Presence of
Residual Stresses
View Full Article top
Paluch B.
EXPERIMENTAL VALIDATION OF COMPOSITE MATERIAL STUCTURE
OPTIMISATION BY GENETIC ALGORITHM
View Full Article top
Pang J.
Self Repair And Enhanced
Damage Visibility In A Hollow Fibre Reinforced Plastic
FULL PAPER top
Panopoulos P.
A nano-micro-composite sensor
for the measurement of flow shear stress
View Full Article top
Pantelides C. P.
CONTRIBUTION OF EXTERNALLY APPLIED FRP COMPOSITES TO
CONCRETE SHEAR TRANSFER
View Full Article top
Papakaliatakis G.
Study of debonding development in fibrous metal matrix
composites
View Full Article top
París F.
Micromechanical aspects of the inter-fibre failure in
fibrous composite materials under bi-axial loads
View Full Article
Evaluation of generalized stress intensity factors in
anisotropic elastic multimaterial corners
View Full Article
An analysis of transversal and delamination cracks in
0o/90o symmetric laminates by BEM
View Full Article top
Park W. H.
Mechanical and Thermal Properties of Novel Silk/Poly (butylene
succinate) Biocomposites
View Full Article top
Parsons A. J.
Phosphate Glass Fibres as Reinforcement in Degradable
Composites for Medical Implant Devices
View Full Article top
Parton
H.
LIQUID MOULDING OF TEXTILE REINFORCED THERMOPLASTICS
View Full Article top
Partridge I. K.
Monitoring cure in glass fibre/vinyl ester pultrusions
View Full Article top
Pascale G.
Interaction between shear and normal stress at concrete-FRP
interface
View Full Article top
Passaro A.
Recycling of PP-based sandwich panels with continuous
fibers composite skins
View Full Article top
Passipoularidis V. A.
RESIDUAL STRENGTH AFTER FATIGUE IN COMPOSITE MATERIALS: A
CRITICAL ASSESSMENT
View Full Article top
Pastor J.
Performances prediction for a structure with
piezoelectric composite inserts
View Full Article top
Patterson E. A.
Photoelastic Measurement of
Matrix Stress Field and Interfacial Shear Stress in Single Glass Fibre Model
Composites
View Full Article top
Pethrick R.A.
Development of novel urethane composites for
vibrational control
View Full Article top
Peijs T.
Temperature and strain rate dependant mechanical
behaviour of all-PP composites - comparison with GMT and NMT
View Full Article
Processing of Carbon Nanotube
Composites using Latex Technology
View Full Article
An Experimental Micromechanical - Finite Element Assisted
-Approach into the Compressive Failure Mechanisms of Carbon Fibre Composites
View Full Article top
Peng H. X.
Tailoring MMC
microstructures for property improvement
View Full Article top
Pereira A. B.
Mode II fracture toughness of glass/epoxy
multidirectional laminates
View Full Article top
Perera R.
STRENGTHENING OF RC COLUMNS WITH FRP JACKETS
View Full Article top
Perie J. N.
INSTRUMENTED TECHNOLOGICAL SPECIMEN (ITS): CURING PROCESS
AND MECHANICAL CHARACTERISATION USING EMBEDDED FIBER BRAGG GRATINGS
View Full Article top
Perreux
D.
A multiscale progressive
failure criterion for composite materials
View Full Article top
Perrin F.
Polypropylene-Clay Nanocomposites:
Formulation, Microstructure and Performance
View Full Article top
Peters P. W. M.
Analysis of the Thermo-mechanical Fatigue Behaviour of
SiC-fibre reinforced Titanium Alloy
(SCS-6/Ti-6242)
View Full Article top
Petit S.
Influence of a thermal shield on the damage tolerance for
composite structures of launchers
View Full Article top
Pettermann H.
Investigations of Perforated Laminates in the Presence of
Residual Stresses
View Full Article top
Pharaoh M.
Relation comparison methodologies of the primary and
secondary frequency components of acoustic events obtained from thermoplastic
composite laminates under tensile stress
View Full Article
A methodology for the identification of tensile failure
mode types in thermoplastic composite laminates by means of acoustic emission
monitoring
View Full Article top
Philippidis T. P.
RESIDUAL STRENGTH AFTER FATIGUE IN COMPOSITE MATERIALS: A
CRITICAL ASSESSMENT
View Full Article
Delamintaion Detection in
Thick Composite Laminates Using guided ultrasonic waves
View Full Article
OPTIMISATION OF A CRUCIFORM TEST SPECIMEN FOR BIAXIAL
LOADING OF FIBER REINFORCED MATERIAL SYSTEMS
View Full Article top
Pissis P.
Dielectric spectroscopy and thermally stimulated
depolarization currents on carbon nanotube -
polycarbonate composites
View Full Article
Broadband dielectric spectroscopy for studying morphology
and interfacial effects in polymer nanocomposites
View Full Article top
Pitsikalis M.
Polyolefin/Silicate Nanocomposites
View Full Article top
Portella P.
Analysis of the Thermo-mechanical Fatigue Behaviour of
SiC-fibre reinforced Titanium Alloy
(SCS-6/Ti-6242)
View Full Article top
Pötschke P.
Dielectric spectroscopy and thermally stimulated
depolarization currents on carbon nanotube -
polycarbonate composites
View Full Article top
Potter K. D.
GENERATION OF RESIDUAL STRESSES AND DISTORTION DURING THE
CURE OF POLYMER MATRIX COMPOSITES
View Full Article top
Pic
A.
Composites of SWNT or carbon black and
melamine-formaldehyde with cellulose
View Full Article top
Picchioni F.
Nano-composites via
solid-state modification for toughening semi-crystalline polymers
View Full Article top
Pierron F.
IDENTIFICATION OF ELASTIC STIFFNESS AND DAMAGE MODEL FOR
ANISOTROPIC COMPOSITE MATERIALS BY THE VIRTUAL FIELDS METHOD
View Full Article top
Pilakoutas K.
Curved non ferrous reinforcement for concrete structures
View Full Article
Probabilistic material partial safety factors for FRP
reinforcement
View Full Article top
Pippan R.
The effect of the equal channel angular pressing on the
particle distribution and fracture properties of metal matrix composites
View Full Article top
Pirondi A.
Fatigue Crack Resistance of 6061 and 7005
Aluminum Alloy - Al2O3
Particulate Composites
View Full Article top
Plagianakos T. S.
Free-Vibration of Adaptive Sandwich Composite Beams with
Piezoelectric Actuators and Sensors using Coupled Higher-Order
Layerwise Mechanics
View Full Article top
Poggi C.
Experimental and numerical determination of the
mechanical properties of multi-axial multi-ply composites
View Full Article top
Polanco J. A.
EFFECT OF VISCOSITY ON MECHANICAL BEHAVIOUR OF
SHORT-FIBRE GLASS REINFORCED PA 6.6 PARTS
View Full Article
DETERMINATION OF LIMIT LOAD FATIGUE FAILURE OF
FIBRE-GLASS REINFORCED PA 6.6 COMPONENTS USING ENERGY CONSIDERATIONS
View Full Article top
Polini W.
Influence of winding speed on winding tension in
robotized filament winding of complex-shape parts
View Full Article top
Polit O.
Using a C 1 triangular Finite element based on a refined
model for analyzing buckling and post-buckling of multilayered shell
structures
View Full Article top
Polyakov V. A.
PLANE STRESS WAVE INTERATION UNDER IMPACT ON THE SURFACE
OF A LAYERED COMPOSITE PANEL
View Full Article top
Poorazarang K.
The effect of Thermal Cycling on the stiffness and
Density of the short Fiber Al2O3/WE54 Mg Alloy Composite
View Full Article top
Primi
S.
Structural design and testing of a composite wind turbine
tower module
View Full Article top
Privalko V. P.
THERMOPLASTIC POLYMER NANOCOMPOSITES
View Full Article top
Proulx S.
Carbon Fibers from Novel
Precursors: Melt-Processible PAN
Terpolymers and UV-Assisted Stabilization Routes
View Full Article top
Psarras G. C.
Hopping Conductivity in - Polymer
Matrix - Granular Metal Composites
View Full Article top
Pugh M.
AUGMENTATION OF FRACTURE TOUGHNESS OF EPOXY USING
NANOPARTICLES
View Full Article top
Pyrz R.
Application of Stochastic Optimization to Reconstruction
of Random Microstructures
View Full Article top
Q top
Quaresimin M.
FATIGUE LIFE PREDICTION OF COMPOSITE LAMINATES
View Full Article
FINITE ELEMENT ANALYSIS OF BONDED AND CO-CURED JOINTS IN
COMPOSITE MATERIALS
View Full Article top
R top
Ramesh Kumar M.
Intricacies in the Prediction of Intra laminar Fracture
Toughness of Multilayered Composites
View Full Article
A study on CBR Behaviour of Sand - Fly ash - Sodium
hydroxide Mixture
View Full Article top
Ratel
M. P.
Fatigue Damaging of Carbon/Epoxy Composite Plates with or
without a hole
View Full Article top
Ramasetty A.
Stress Transfer in Carbon Nanotube
Reinforced Polymer Composites: An Experimental, Finite Element and Analytical
Study
View Full Article top
Ramirez-Jimenez C.
Relation comparison methodologies of the primary and
secondary frequency components of acoustic events obtained from thermoplastic
composite laminates under tensile stress
View Full Article
A methodology for the identification of tensile failure
mode types in thermoplastic composite laminates by means of acoustic emission
monitoring
View Full Article top
Rammerstorfer F. G.
Thermo-Mechanically Interacting Composite Pipes Optimised
by Genetic Algorithms
View Full Article
Investigations of Perforated Laminates in the Presence of
Residual Stresses
View Full Article top
Rao
G. V.
Intricacies in the Prediction of Intra laminar Fracture
Toughness of Multilayered Composites
View Full Article top
Ravi
J.
IR nonlinear photothermal
imaging in Carbon/Epoxy composite materials: Experimental survey
View Full Article top
Ray B. S.
INFLUENCE OF AQUEOUS SOLUTIONS ON MECHANICAL BEHAVIOUR OF
GFRP COMPOSITES AT ROOM TEMPERATURE AND AT HIGH TEMPERATURE
View Full Article top
Raz
D.
X-RAY TOMOGRAPHIC INVESTIGATION OF STOCHASTIC DAMAGE IN
POLYMER COMPOSITES
View Full Article top
Razin
A. F.
Development of Composite Anisogrid
Spacecraft Attach Fitting
View Full Article top
Reaveley L.D.
CONTRIBUTION OF EXTERNALLY APPLIED FRP COMPOSITES TO
CONCRETE SHEAR TRANSFER
View Full Article top
Reed G. T.
Optical fibre sensor for monitoring flow and resin curing
in composites manufacturing
View Full Article
RESPONSE OF A FBG SENSOR
TO MATRIX CRACK DEVELOPMENT
View Full Article
SENSITIVITY OF AN EMBEDDED POLARIMETRIC SENSOR BASED ON
PANDA FIBRE
View Full Article
Determination of the the
strain-optical parameters for a polarimetric
optical sensor embedded in a composite
View Full Article top
Regev O.
Processing of Carbon Nanotube
Composites using Latex Technology
View Full Article top
Reis
J. M. L.
Characterization of Polymer Concrete made with Recycled
Aggregate
View Full Article top
Reis
P. N. B.
Fatigue behaviour of hybrid composite laminates subjected
to bending loading
View Full Article top
Ren
Y.
Fatigue failure mechanisms of single-walled carbon
nanotube ropes
View Full Article top
Reynolds C. T
Temperature and strain rate dependant mechanical
behaviour of all-PP composites - comparison with GMT and NMT
View Full Article top
Reynolds N.
Relation comparison methodologies of the primary and
secondary frequency components of acoustic events obtained from thermoplastic
composite laminates under tensile stress
View Full Article
A methodology for the identification of tensile failure
mode types in thermoplastic composite laminates by means of acoustic emission
monitoring
View Full Article top
Ribeaux M.
Effects of Damage on the Energy Absorption of Composite
Tubes
View Full Article top
Ricotta M.
FATIGUE LIFE PREDICTION OF COMPOSITE LAMINATES
View Full Article
FINITE ELEMENT ANALYSIS OF BONDED AND CO-CURED JOINTS IN
COMPOSITE MATERIALS
View Full Article top
Robinson P.
A modified 4 ENF Test Ring for Measuring Mode II Fracture
Toughness Under Compressive Forces at the Crack
Interface
View Full Article top
Romao C.
Mechanical Characterisation of Sisal Fibres for
Reinforcing of Composite Materials with several different surface treatments
View Full Article top
Robitaille F.
Phosphate Glass Fibres as Reinforcement in Degradable
Composites for Medical Implant Devices
View Full Article
Predictive modelling of processing and performance
properties for textile composite unit cells: current status and perspectives
View Full Article
Dependence of Permeability Variations on the Textile
Structure
View Full Article
The Effects of Fabrication Methods for Energy Absorbing
Polymer Composite Structures
View Full Article top
Romeo J.
HELIPLAT: Manufacturing and Structural Design of Solar
Powered UAV Scaled Prototype
View Full Article top
Roth S.V.
THE USE OF MICROFOCUS SYNCHROTRON X-RAY RADIATION AS A
NOVEL TECHNIQUE TO STUDY THE INTERFACE IN COMPOSITES
View Full Article top
Rouxel
D.
Composites of SWNT or carbon black and
melamine-formaldehyde with cellulose
View Full Article top
Rouquie S.
Experimental evidence of coupling between matrix cracking
and oxidation during thermal ageing of C/epoxy laminates
View Full Article top
Rozenberg A. S.
Polymer Matrix Nanocomposites
Exhibiting Magnetic Properties
View Full Article top
Rich M. J.
UV-Ozone Surface Modifiaction
of Carbon Based Reinforcements for Composite Materials
View Full Article top
Riontino G.
REINFORCEMENT INFLUENCE ON PRECIPITATION PHENOMENA IN
Ti3Al INTERMETALLIC REINFORCED ALUMINIUM MATRIX COMPOSITES
View Full Article top
Riva E.
3D Finite Element Damage Analysis of a Twill-weave Lamina
subjected to In-plane Shear
View Full Article top
Rizov V. I.
EFFECT OF VOID CONTENT ON THE FRACTURE PERFORMANCE OF
LONG GLASS FIBER REINFORCED POLYPROPYLENE
View Full Article top
Rudd
C. D.
Phosphate Glass Fibres as Reinforcement in Degradable
Composites for Medical Implant Devices
View Full Article
Predictive modelling of processing and performance
properties for textile composite unit cells: current status and perspectives
View Full Article
CURE AND RESIDUAL VOLATILE CLASSIFICATION OF AUTOMOTIVE
"CLASS A" PANELS VIA RTM
View Full Article
Dependence of Permeability Variations on the Textile
Structure
View Full Article
The Effects of Fabrication Methods for Energy Absorbing
Polymer Composite Structures
View Full Article top
S top
Sahuquillo O.
Thermal Analysis of Polymer Resin Matrix Reinforced with
E-glass Fibres Degraded in Neutral Environments
View Full Article
Modelling of Long-Term Degradation of E-glass
Reinforced Composites in Organic Environments
View Full Article top
Salvador M.D.
Thermal Analysis of Polymer Resin Matrix Reinforced with
E-glass Fibres Degraded in Neutral Environments
View Full Article
Modelling of Long-Term Degradation of E-glass
Reinforced Composites in Organic Environments
View Full Article
Corrosion behaviour in NaCl
solutions of AMCs: material and test parameters
influence
View Full Article
On the precipitation-hardening behaviour of ceramic
reinforced AA6061 composites
View Full Article
REINFORCEMENT INFLUENCE ON PRECIPITATION PHENOMENA IN
Ti3Al INTERMETALLIC REINFORCED ALUMINIUM MATRIX COMPOSITES
View Full Article top
Samaras Z. I.
Monitoring cure in glass fibre/vinyl ester pultrusions
View Full Article top
Sapkás A.
Buckling of FRP beams and columns
View Full Article top
Satoru
Hirosawa
Estimation of a mechanical characterization for woven
fabric composites by FEM based on damage mechanics A067
View Full Article top
Sabirov
I.
The effect of the equal channel angular pressing on the
particle distribution and fracture properties of metal matrix composites
View Full Article top
Saenz N.
CONTRIBUTION OF EXTERNALLY APPLIED FRP COMPOSITES TO
CONCRETE SHEAR TRANSFER
View Full Article top
Sakikawa M.
Utilization of a rubber mat for the concrete caisson
structures as a friction-increasing material
View Full Article top
Sandler J. K. W.
Fine-tuning the properties of poly(ether
ether ketone)/poly(ether
imide) blends by the addition of carbon
nanofibres
View Full Article top
Sandlund E. J.
Particle distribution mechanisms in infusion
molded composites
View Full Article top
Santinelli F.
Mechanics of shear FRP-strengthening of RC beams
View Full Article top
Sarathi R.
Influence of Acid Rain on the Tracking Phenomena in
Silicone Rubber Insulation - Diagnosis through Physico-Chemical
Analysis
View Full Article top
Saravanos
D. A.
Identifying the Temperature Effect on the Damped Response
of Composite Beams using Piezoceramic Actuators
and Sensors
View Full Article
Free-Vibration of Adaptive Sandwich Composite Beams with
Piezoelectric Actuators and Sensors using Coupled
Higher-Order Layerwise Mechanics
View Full Article top
Sauder C.
Thermomechanical properties of CVI-processed
Si-B-C based carbides as derived from the
behavior of carbon fiber-reinforced
microcomposites
View Full Article top
Schledjewski R.
Thermoset Bonded Natural Fibre Prepregs -A new approach
for an eco-composite
View Full Article
Mechanical performance of in-situ consolidated
thermoplastic fiber reinforced tape materials
View Full Article top
Schneider K.
THE USE OF MICROFOCUS SYNCHROTRON X-RAY RADIATION AS A
NOVEL TECHNIQUE TO STUDY THE INTERFACE IN COMPOSITES
View Full Article
Processing and characterisation of
Polyhedral oligomeric
silsesquioxanes (POSS®) nanocomposites
View Full Article top
Schubel P. J.
CURE AND RESIDUAL VOLATILE CLASSIFICATION OF AUTOMOTIVE
"CLASS A" PANELS VIA RTM
View Full Article top
Schuecker C.
Investigations of Perforated Laminates in the Presence of
Residual Stresses
View Full Article top
Schulte K.
Modelling of the initial failure of CFRP structures by
partial discretisation: a micro/macro-mechanical
approach of first ply failure
View Full Article
Evaluation of the potential of carbon nanotubes for a
reinforcement of an epoxy matrix
View Full Article
Damage evaluation of Glare 4B under interlaminar shear
loading at elevated temperatures
View Full Article
Micromechanical Yielding and Failure of CF/Epoxy caused
by the Formation of Residual Stresses under Macroscopic Boundary Conditions
View Full Article top
Schulz W.
Embedded Sensor Based Health Monitoring System of a
Composite Bridge Deck
View Full Article top
Séguéla R.
Morphology of PA6-nanocomposite fibres by means of ESEM
study of fracture surfaces
View Full Article top
Sen
R.
Issues Related to the FRP Repair of Corroded
Prestressed Piles
View Full Article top
Segovia F.
Thermal Analysis of Polymer Resin Matrix Reinforced with
E-glass Fibres Degraded in Neutral Environments
View Full Article
Modelling of Long-Term Degradation of E-glass
Reinforced Composites in Organic Environments
View Full Article top
Segurado J.
COMPUTATIONAL MODELING OF DEFORMATION AND DAMAGE IN
PARTICLE-REINFORCED COMPOSITES
View Full Article top
Setvanovic M.
EDGE EFFECT ON CARBON/EPOXY STRENGTH AND DELAMINATION OF
CARBON/EPOXY LAMINATE WITH DIFFERENT STACKING SEQUENCE
View Full Article top
Shaffer M.S.P.
Carbon Nanotube-Conducting
Polymer Nanocomposites
View Full Article
Fine-tuning the properties of poly(ether
ether ketone)/poly(ether
imide) blends by the addition of carbon
nanofibres
View Full Article top
Sherburn M.
Predictive modelling of processing and performance
properties for textile composite unit cells: current status and perspectives
View Full Article top
Sjögren A.
Energy absorption capability of low-cost composite
materials
View Full Article
Effects of stitch pattern on the mechanical properties of
non-crimp fabric composites
View Full Article top
Smith P.A.
Damage Characterisation of Thermally-Shocked
Woven-Fibre-Reinforced Ceramic Matrix Composites
View Full Article top
Sorrentino L.
Influence of winding speed on winding tension in
robotized filament winding of complex-shape parts
View Full Article top
Sousa M.
Smart Composite Plates for Health Monitoring of a Boat
Structure
View Full Article
Characterization of Polymer Concrete made with Recycled
Aggregate
View Full Article top
Spiegl M.
Optimization of multi-composed materials: Application to
asphalt pavements
View Full Article top
Stamm M.
THE USE OF MICROFOCUS SYNCHROTRON X-RAY RADIATION AS A
NOVEL TECHNIQUE TO STUDY THE INTERFACE IN COMPOSITES
View Full Article top
Starkova O.
EFFECT OF TEMPERATURE ON NONLINEAR CREEP OF SOME
THERMOPLASTS
View Full Article
DEFORMABILITY AND DURABILITY OF CFRP REBARS AND
COMPONENTS UNDER MOISTURE AND TEMPERATURE ACTION
View Full Article top
Stengler R.
New method to determine the influence of
mico/nano-particles on surface & functional
properties
View Full Article top
Stepan
Lomov
Estimation of a mechanical characterization for woven
fabric composites by FEM based on damage mechanics
View Full Article
Micro - Macro structural analysis of textile composite
parts
View Full Article top
Stringer L.G.
Spring-in measurements in U-channel made of AS4/8552
carbon/epoxy and effects of fibre volume fraction variation
View Full Article top
Strohaecker T.R.
Properties and Fracture Analysis of Diffusion Bonded
TiC-Particulate Reinforced Ti-6Al-4V Titanium
Matrix Composite
View Full Article top
Shakeri M.
Optimal stacking sequence of laminated cylindrical panel
using generic algorithm
View Full Article
Elasticity solution of thick laminated cylindrical panel
with piezoelectric layer under dynamic loading
View Full Article top
Shapovalov L.D.
Nanostructured
nonosocyanate polyurethane composites
View Full Article top
Shyng Y. T.
Analysis of Interfacial Micromechanics of Single-Fibre
Model Composites using Synchrotron Microfocus
X-ray Diffraction
View Full Article top
Shyu C.
Rapidly deployable, portable, GFRP VEHICLE Bridge
Development Project
View Full Article top
Silva J. F.
Production of GF/PP Woven Fabrics from Powder Coated
Thermoplastic Matrix Towpregs
View Full Article top
Silvain J.-F.
Heat sink with adaptive thermal properties
View Full Article
Electroless deposition of
metal substrate
View Full Article top
Simon E.
Use of a physically-based unit cell finite element model
for the simulation of drapability of non-crimp
fabric materials
View Full Article top
Sinmazceliki T.
IMPACT-FATIGUE BEHAVIOUR OF CARBON/PEI COMPOSITE
MATERIALS
View Full Article
WEATHERING EFFECTS ON THE IMPACT, BULK AND SURFACE
PROPERTIES OF POLYPHENYLENE SULPHIDE (PPS) COMPOSITES
View Full Article top
Sittner P.
Recovery stress generation by shape memory alloy
polycrystalline elements
View Full Article top
Skoczen B.
The influence of phonon transmission impedance on the
thermal conductivity in composite material for cryogenic structure
View Full Article top
Skordos A. A.
Monitoring cure in glass fibre/vinyl ester pultrusions
View Full Article top
Skukis E.
Finite element modelling and dynamic analysis of
laser-welded sandwich panels
View Full Article top
Slawska-Waniewska A.
Polymer Matrix Nanocomposites
Exhibiting Magnetic Properties
View Full Article top
Smits A.
OPTIMISATION OF A CRUCIFORM TEST SPECIMEN FOR BIAXIAL
LOADING OF FIBER REINFORCED MATERIAL SYSTEMS
View Full Article top
Snook G. A.
Carbon Nanotube-Conducting
Polymer Nanocomposites
View Full Article top
Sørensen B. A.
Micromechanical investigation of the influence of fibre
sizings on the crack bridging behaviour of glass
fibre composites
View Full Article top
Sousa M.
Smart Composite Plates for Health Monitoring of a Boat
Structure
View Full Article top
Soutis C.
Application of a Lamp Wave Technique for the
Non-Destructive Inspection of Composite Structures
View Full Article
Predicting the Compressive Failure Load of a CFRP
Stiffened Panel Using the Seven-Point Bending Test
View Full Article
Modelling of Low Velocity Impact Damage in Laminated
Composites
View Full Article
A stochastic approach to the fibre micro-buckling problem
in layered composites with interfacial defects
View Full Article top
Spaseska
D.
CORRELATION BETWEEN PRODUCTION'S PROCESS PARAMETERS OF
GLASS-FIBER BASED COMPOSITE MATERIALS WITH ITS MECHANICAL PROPERTIES
View Full Article top
Sreejith P. S.
MACHINING OF CARBON/PHENOLIC ABLATIVE COMPOSITE USING
PCBN TOOLS
View Full Article top
Stachurski Z.
Improve design and manufacture of a high performance
composite oar blade
View Full Article top
Stanford J. L.
Carbon Nanotube-Polymer
Composites for use as Remote Strain-Sensor Coatings
View Full Article top
Stanley W. F.
Effects of Variable Clearance in Multi-Bolt Composite
Joints on Load Distribution and Quasi-Static Strength
View Full Article
Effects of Variable Clearance in Multi-Bolt Composite
Joints on Fatigue Life
View Full Article top
Stefanou G.
A stochastic approach to the fibre micro-buckling problem
in layered composites with interfacial defects
View Full Article top
Strombeck A. V.
FRICTION STIR WELDING OF AN AA7005/Al2O3/10% REINFORCED
ALLOY
View Full Article top
Stronge W. J.
Dynamic Indentation of Lightweight Sandwich Panels
View Full Article top
Sucharda Z.
Processing, properties, and performance of
polysiloxane-derived ceramic matrix in heat
resistant composites reinforced with R-glass or fine ceramic fibres
View Full Article top
Suemasu
H.
Strength Improvement and Notch Insensitivity of
Carbon/Carbon Composites using ESPI-NDE
View Full Article top
Sugihara S.
Plasma Polymerisation for Controlling the Interfacial
Response in Advanced Polymer Fibre Matrix Composites
View Full Article top
Sun C. T.
Technique for High Strain Rate SHPB Testing of Off-Axis
Carbon Fiber Composites
View Full Article top
Sun Y. P.
Optimal Design of The
Swept-Forward Wing in Composite Materials
View Full Article top
Susme L.
FATIGUE LIFE PREDICTION OF COMPOSITE LAMINATES
View Full Article top
Suzuki H.
Experimental Study on Repair of Cracked Steel Member by
CFRP Strip and Stop Hole
View Full Article top
Suzuki K.
Finite Element Analysis of Fractures in Natural Plant
Cell Structures
View Full Article top
Szutkowska M.
Fracture toughness determination of composites based on
alumina from indentation-induced Vickers cracks
View Full Article top
T top
Takeda S.
Quantitative Measurement of Delamination Growth in
Composite Laminates with Small-Diameter Fiber Bragg Grating Sensors
View Full Article top
Takeda N.
Quantitative Measurement of Delamination Growth in
Composite Laminates with Small-Diameter Fiber Bragg Grating Sensors
View Full Article top
Tanaeva S.A.
FEATURES OF THERMOPHYSICAL PROPERTIESOF MODIFIED EPOXY
COMPOSITES AT LOW TEMPERATURES
View Full Article
Epoxy composites hardened by phosphorus carbon
fibers. Influence of thermal cycling on thermal
properties
View Full Article top
Tanaka M.
Micromechanical Yielding and Failure of CF/Epoxy caused
by the Formation of Residual Stresses under Macroscopic Boundary Conditions
View Full Article
Effect of bending deformation on critical current in
Bi2223/Ag/Ag-alloy composite superconducting tapes
View Full Article
Post-tension strengthening via carbon fiber sheet for
existing steel bridge girders
View Full Article top
Taranu N.
ANALYSIS AND BEHAVIOUR OF SANDWICH
PANNELS WITH PROFILED METAL FACINGS UNDER TRANSVERSE LOAD
View Full Article
Curved non ferrous reinforcement for concrete structures
View Full Article top
Takagi H.
Characterization of high-strength cross-ply "green"
composites
View Full Article top
Tan V. B. C.
Atomistic Modelling of Composite Interfaces
View Full Article top
Tanoglu M.
Microstructure and mechanical properties of ceramic
matrix composites (CMCs) from polysiloxane and
inert / active fillers
View Full Article top
Tarsha
Kurdi K. E.
Process-induced stresses and their
influence upon some mechanical properties of carbon / epoxy laminates.
Part 2: Study by acoustic emission
View Full Article top
Taucer F.
Structural design and testing of a composite wind turbine
tower module
View Full Article top
Tay
T.E.
Atomistic Modeling of
Composite Interfaces
View Full Article top
Ten
Thije R.H.W.
Permeability Prediction of Non-Crimp Fabrics Based on a
Geometric Model
View Full Article top
Thévenet P.
Mode I Interlaminar Fracture Toughness of Carbon-Epoxy
Laminates UNDER High Speed Loading
View Full Article top
Theiler G.
Friction of Polymer Composites in Liquid Hydrogen Media
View Full Article top
Theotokoglou E. E.
Cracking of composite beams, Numerical Evaluation
View Full Article top
Thionnet A.
Micromechanical Damage and Life Prediction of Carbon
Fiber Composite Pressure Vessels
View Full Article top
Thomason J. L.
Structure-Performance Relationships
of Injection Moulded Thermoplastic Composites at High Fibre Contents
View Full Article top
Thomsen O. T.
Localised Effects in Structural Sandwich Panels:
Practical Occurrence, analysis and Design
View Full Article top
Thorne A. M.
RESPONSE OF A FBG
SENSOR TO MATRIX CRACK DEVELOPMENT
View Full Article
SENSITIVITY OF AN EMBEDDED POLARIMETRIC SENSOR BASED ON
PANDA FIBRE
View Full Article
Determination of the strain-optical parameters for a
polarimetric optical sensor embedded in a
composite
View Full Article top
Thostenson E. T.
Modeling and Characterization
of Carbon Nanotubes and their Composites
View Full Article top
Thouin M.
Design of a Carbon Fiber Bicycle Stem Using an Internal
Bladder and Resin Transfer Molding
View Full Article top
Tommasi M.
ALL OXIDE CERAMIC MATRIC COMPOSITES FOR THERMOSTRUCTURAL
APPLICATIONS
View Full Article top
Ton van
der Laan I.
Automatic generation of rib mould for rubber forming of
thermoplastic composites, using knowledge based engineering
View Full Article top
Toubal L.
Fatigue Damaging of Carbon/Epoxy Composite Plates with or
without a hole
View Full Article top
Toussaint E.
The influence of phonon transmission impedance on the
thermal conductivity in composite material for cryogenic structure
View Full Article
Creep behaviour of reinforced concrete beams strengthened
with composite plates
View Full Article top
Ton-That T.
Polypropylene-Clay Nanocomposites:
Formulation, Microstructure and Performance
View Full Article top
Toro P.
Evaluation of generalized stress intensity factors in
anisotropic elastic multimaterial corners
View Full Article top
Touratier M.
Using a C 1 triangular Finite element based on a refined
model for analyzing buckling and post-buckling of multilayered shell
structures
View Full Article top
Toy N.
A nano-micro-composite sensor
for the measurement of flow shear stress
View Full Article top
Triantafillou T.
AUTOMATED DESIGN OF FRP-STRENGTHENED MASONRY
View Full Article top
Tsamis C.
Quantification of Uncertainties in the Performances of
Smart Composite Structures
View Full Article top
Tsouvalis N. G.
Design Buckling Curves for Clamped Orthotropic Laminated
Plates
View Full Article
LIGHTWEIGHT COMPOSITE PRESSURE HOUSINGS FOR MID-WATER AND
BENTHIC APPLICATIONS
View Full Article top
Tsuda H.
Impact damage detection of CFRP using an FBG ultrasonic
sensing system
View Full Article top
Tümer F.
Micro - Macro structural analysis of textile composite
parts
View Full Article top
Turner T.A.
The Effects of Fabrication Methods for Energy Absorbing
Polymer Composite Structures
View Full Article top
Tzetzis
D.
Assessment of a Novel Bondline
Toughening Procedure for Composite Vacuum Infusion In-Field Repairs
View Full Article top
Tzoutzouli S.
Identifying the Temperature Effect on the Damped Response
of Composite Beams using Piezoceramic Actuators
and Sensors
View Full Article top
U top
Uesawa K.
Adhesive properties of toughened epoxy resins with
pre-formed thermoplastic polymer particles
View Full Article top
Uggowitzera P.J.
Thermomechanical properties of interpenetrating
graphite/aluminium composites produced by indirect squeeze casting
process
View Full Article top
Um
M.-K.
Similarity Relations of Process Variables in Resin Flow
of RTM Process
View Full Article top
Unterweger K.
Local deformation processes and damage evolution in MMCs
View Full Article top
Ussorio M.
Solution impregnation of natural fibres/ABS matrix
composites
View Full Article
RESPONSE OF A FBG SENSOR
TO MATRIX CRACK DEVELOPMENT
View Full Article top
V top
Valenza A.
Mathematical modelling of the pultrusion process of
polyester-glass fibre composites
View Full Article top
Van de
Weyenberg I.
A continuous process for UD flax fibre reinforced
composites
View Full Article top
Van den Brink A.
A ligthweight 3-D Support
Structure for Precise Tracking System
View Full Article top
Van Den
Broucke B.
Micro - Macro structural analysis of textile composite
parts
View Full Article top
Van
Hattum F.
Optimisation of the Low-Shear Compounding of Carbon
Nanofibre/Polymer Composites
View Full Article
Production of GF/PP Woven Fabrics from Powder Coated
Thermoplastic Matrix Towpregs
View Full Article top
Van
Hemelrijck D.
IR nonlinear photothermal
imaging in Carbon/Epoxy composite materials: Experimental survey
View Full Article
OPTIMISATION OF A CRUCIFORM TEST SPECIMEN FOR BIAXIAL
LOADING OF FIBER REINFORCED MATERIAL SYSTEMS
View Full Article top
Van
Paepegem W.
Simulating Damage and Permanent Strain in
Fibre-reinforced Composites under In-plane Fatigue Loading
View Full Article top
Van
Wingerde A. M.
OPTIMISATION OF A CRUCIFORM TEST SPECIMEN FOR BIAXIAL
LOADING OF FIBER REINFORCED MATERIAL SYSTEMS
View Full Article top
Vangrimde B.
A continuous process for UD flax fibre reinforced
composites
View Full Article top
Varadi K.
FE MODELLING OF WEAR MECHANISMS OF CF/PEEK COMPOSITES
View Full Article top
Varlet J.
Evolution of the exfoliation of lamellar materials during
polymerisation of polyamide-6
View Full Article top
Varna
J.
Inelastic behavior of
viscoelastic SMC composites with micro damage
View Full Article
Stiffness degradation in Non-Crimp fabric composite in
tension due to damage
View Full Article top
Valiev R.Z.
The effect of the equal channel angular pressing on the
particle distribution and fracture properties of metal matrix composites
View Full Article top
Van
Duin M.
Nano-composites via
solid-state modification for toughening semi-crystalline polymers
View Full Article top
Vandamme M.
Validation of a piezoelectric laminated plate modelling
View Full Article top
Vassilopoulos A. P.
Parametric investigation of fatigue life prediction
methodology
View Full Article top
Vasiliev V. V.
Development of Composite Anisogrid
Spacecraft Attach Fitting
View Full Article top
Vautrin A.
Internal Stresses Induced by Cyclical Environmental
Conditions in Laminated Composite Plates
View Full Article
Identification of 3D Moisture Diffusion Coefficients for
Carbon/Epoxy Laminates
View Full Article
Dimensional stability of multilayer printed circuit
boards : influence of the reinforcement
View Full Article top
Velasco J. I.
Mechanical behaviour in HDPE-tyre reused Rubber
Composites. Effect of chemical modification
View Full Article top
Verlinden C.
Interaction between shear and normal stress at concrete-FRP
interface
View Full Article top
Vekas L.
THE USE OF NANOMAGNETIC FLUIDS TO ENHANCE THE PRODUCTION
OF COMPOSIT PARTS COMPONENTS MADE BY RTM
View Full Article top
Veronesi P.
GLASS MATRIX COMPOSITE
FOAMS CONTAINING METALLIC FIBRES PRODUCED BY MICROWAVE HEATING
View Full Article top
Vieira P.
Mechanical Characterisation of Wool Fibres for
Reinforcing of Composite Materials
View Full Article
Mechanical Characterisation of Sisal Fibres for
Reinforcing of Composite Materials with several different surface treatments
View Full Article
Production of GF/PP Woven Fabrics from Powder Coated
Thermoplastic Matrix Towpregs
View Full Article
Fatigue Behaviour of Reinforced Concrete Beam
Strengthened with a CFRP Reinforced System
View Full Article top
Verpoest
I.
PROGRESSIVE DAMAGE CHARACTERIZATION OF STITCHED,
BI-AXIAL, MULTI-PLY CARBON FABRICS COMPOSITES
View Full Article
A continuous process for UD flax fibre reinforced
composites
View Full Article
Estimation of a mechanical characterization for woven
fabric composites by FEM based on damage mechanics
View Full Article
Micro - Macro structural analysis of textile composite
parts
View Full Article
LIQUID MOULDING OF TEXTILE REINFORCED THERMOPLASTICS
View Full Article
Experimental and numerical determination of the
mechanical properties of multi-axial multi-ply composites
View Full Article top
Vettori M.
PROGRESSIVE DAMAGE CHARACTERIZATION OF STITCHED,
BI-AXIAL, MULTI-PLY CARBON FABRICS COMPOSITES
View Full Article
Electrical Resistance Methodology for Damage Monitoring
in Composite Materials: Applications and Results
View Full Article top
Vigier G.
Evolution of the exfoliation of lamellar materials during
polymerisation of polyamide-6
View Full Article top
Vigier Y.
Performances prediction for a structure with
piezoelectric composite inserts
View Full Article top
Viña J.
IMPACT RESISTANCE MODIFICATION OF PEI REINFORCED WITH
CARBON FIBER TEXTILE AFTER MECHANICAL, HIGROTHERMAL, AND HIGROTHERMAL-MECHANICAL
EXPOSURE
View Full Article top
Violante M.G.
Planning and manufacturing a mould for Resin Transfer
Moulding
View Full Article top
Vitiello C.
Numerical simulation and Experimental characterization of
RIFT process
View Full Article top
Vlachos D. D.
Anisotropic Damage modelling of composite materials
using ultrasonic stiffness matrix
measurements
View Full Article top
Voigt B.
Composites of SWNT or carbon black and
melamine-formaldehyde with cellulose
View Full Article top
Viñolo A.
Structural design and testing of a composite wind turbine
tower module
View Full Article top
Volpone L.M.
FRICTION STIR WELDING OF AN AA7005/Al2O3/10% REINFORCED
ALLOY
View Full Article top
W top
Wachtel E.
The decoded model of
transcrystallinity in carbon and aramid fibers
reinforced nylon 66 composites by Synchrotron study
View Full Article top
Wada A.
Comparison of shearing test methods for pultruded
materials
View Full Article top
Wagner H. D.
RECENT ADVANCES IN THE MECHANICS OF CARBON NANOTUBES AND
THEIR COMPOSITES
View Full Article
X-RAY TOMOGRAPHIC INVESTIGATION OF STOCHASTIC DAMAGE IN
POLYMER COMPOSITES
View Full Article top
Wakeman M. D.
Hybrid thermoplastic composite beam structures
integrating UD tows, stamped fabrics, and injection/compression moulding
View Full Article top
Walker R. A.
Carbon Fibers from Novel
Precursors: Melt-Processible PAN
Terpolymers and UV-Assisted Stabilization Routes
View Full Article top
Ward I. M.
THE HOT COMPACTION OF WOVEN POLYETHYLENE TEREPHTHALATE
MULTIFILAMENTS
View Full Article top
Warren R.
Interfacial Properties of a Sapphire Fiber / Alumina
Matrix Composite at Elevated Temperature
View Full Article top
Warrior N. A.
CURE AND RESIDUAL VOLATILE CLASSIFICATION OF AUTOMOTIVE
"CLASS A" PANELS VIA RTM
View Full Article
The Effects of Fabrication Methods for Energy Absorbing
Polymer Composite Structures
View Full Article
Effects of Damage on the Energy Absorption of Composite
Tubes
View Full Article top
Weaver P. M.
Interfacial Properties of a Sapphire Fiber / Alumina
Matrix Composite at Elevated Temperature
View Full Article top
Weck
A.
Fracture Tougness of
Ti-6Al-4V/SiC Composites at Ambient and Elevated Temperature
View Full Article top
Wei
J.
Micromechanical investigation of the influence of fibre
sizings on the crack bridging behaviour of glass
fibre composites
View Full Article top
Weihs H.
Failure Criteria for Non-Metallic Materials - Part
II:Ceramic Matrix
Compsites
View Full Article top
Weinhold W. P.
New method to determine the influence of
mico/nano-particles on surface & functional
properties
View Full Article top
Weteringe B.
Automatic generation of rib mould for rubber forming of
thermoplastic composites, using knowledge based engineering
View Full Article top
Wiesel E.
RECENT ADVANCES IN THE MECHANICS OF CARBON NANOTUBES AND
THEIR COMPOSITES
View Full Article
X-RAY TOMOGRAPHIC INVESTIGATION OF STOCHASTIC DAMAGE IN
POLYMER COMPOSITES
View Full Article top
Wilkinson D. S.
Modeling Damage Evolution and
Fracture in Metal Matrix Composites
View Full Article top
Williamson C.
Investigation into the failure of open and filled holes
in CFRP laminates under biaxial loading conditions
View Full Article top
Windle A. H.
Carbon Nanotube-Conducting
Polymer Nanocomposites
View Full Article
Fine-tuning the properties of poly(ether
ether ketone)/poly(ether
imide) blends by the addition of carbon
nanofibres
View Full Article top
Wisnom M. R.
GENERATION OF RESIDUAL STRESSES AND DISTORTION DURING THE
CURE OF POLYMER MATRIX COMPOSITES
View Full Article
Tailoring MMC
microstructures for property improvement
View Full Article top
Wittke H.
Failure Criteria for Non-Metallic Materials - Part
II:Ceramic Matrix
Compsites
View Full Article top
Wu X.
INTERNAL STRUCTURE DAMAGE EVOLUTION IN COMPOSITE USING
SYNCHROTRON RADIATION
View Full Article top
Watzeels K.
Off-axis behaviour of cement matrix composites
View Full Article top
Waldron P.
Probabilistic material partial safety factors for FRP
reinforcement
View Full Article top
Wang C.
Calculation of water diffusion coefficient and dynamics
in site of adhesive/c-c composites joints
View Full Article top
Wang H.
RESPONSE OF A FBG
SENSOR TO MATRIX CRACK DEVELOPMENT
View Full Article
Determination of the the
strain-optical parameters for a polarimetric
optical sensor embedded in a composite
View Full Article
SENSITIVITY OF AN EMBEDDED POLARIMETRIC SENSOR BASED ON
PANDA FIBRE
View Full Article top
Wang H. P.
The Development of the Resin Infusion between Double
Flexible Tooling Process: Implementation of
UV Curing
View Full Article top
Wang X. F.
Monte-Carlo Simulation to Fracture of Cross-ply Laminates
at Room and Low Temperature
View Full Article top
Wastiels J.
Off-axis behaviour of cement matrix composites
View Full Article top
Watts J. F.
ORGANIC-INORGANIC HYBRID NANOPARTICLES AS MODIFIERS FOR
POLYMER COMPOSITE MATRICES
View Full Article top
Werner P.
Fine-tuning the properties of poly(ether
ether ketone)/poly(ether
imide) blends by the addition of carbon
nanofibres
View Full Article top
Wight G.
Rapidly deployable, portable, GFRP VEHICLE Bridge
Development Project
View Full Article top
Wisnom M. R.
GENERATION OF RESIDUAL STRESSES AND DISTORTION DURING THE
CURE OF POLYMER MATRIX COMPOSITES
View Full Article
Tailoring MMC
microstructures for property improvement
View Full Article top
Wojciechowski K. W.
VISCOELASTIC PROPERTIES OF INHOMOGENEOUS NANOCOMPOSITES
View Full Article top
X top
Xiao T.
Fatigue failure mechanisms of single-walled carbon
nanotube ropes C121
View Full Article top
Y top
Yanagisawa T.
Physical Properties of Carbon
Nanotube/Polypropylene Compounds
View Full Article top
Yeomans J. A.
Damage Characterisation of Thermally-Shocked
Woven-Fibre-Reinforced Ceramic Matrix Composites
View Full Article
Environmental Degradation of a Continuous Oxide
Fibre-Reinforced Oxide Matrix Composite
View Full Article top
Yilmaz T.
WEATHERING EFFECTS ON THE IMPACT, BULK AND SURFACE
PROPERTIES OF POLYPHENYLENE SULPHIDE (PPS) COMPOSITES
View Full Article
Impact-Fatigue Behaviour of Carbon/Pei
Composite materials
View Full Article top
Yoon K.
Embedded Sensor Based Health Monitoring System of a
Composite Bridge Deck
View Full Article top
Yu W. R.
Simulation of Viscous Textile Composite Sheet Forming
based on a Unit Cell Energy Model
View Full Article top
Yu Z.
Embedded Sensor Based Health Monitoring System of a
Composite Bridge Deck
View Full Article top
Young R.A.
Synthesis of Novel Lignin-based Composite Materials Using
Cold-Plasma Technique
View Full Article top
Young R.J.
Photoelastic Measurement of
Matrix Stress Field and Interfacial Shear Stress in Single Glass Fibre Model
Composites
View Full Article
Analysis of Interfacial Micromechanics of Single-Fibre
Model Composites using Synchrotron Microfocus
X-ray Diffraction
View Full Article
Carbon Nanotube-Polymer
Composites for use as Remote Strain-Sensor Coatings
View Full Article
Investigation of Hygrothermal
Ageing Phenomena in Model Composites by Raman Spectroscopy
View Full Article top
Z top
Zafeiropoulos N. E.
The use of Microfocus
Synchrotron X-ray Radiation as a novel technique to study the interface in
composites
View Full Article
Processing and characterisation of Polyhedral oligomeric
silsesquioxanes (POSS®) nanocomposites
View Full Article
The interface in Flax/Propylene composite materials
View Full Article top
Zako M.
Estimation of a mechanical characterization for woven
fabric composites by FEM based on damage mechanics
View Full Article
On an estimation of the damping properties of woven
fabric composites
View Full Article top
Zhang H.
Sliding Wear of Polyamide 6,6
Nanocomposites
View Full Article top
Zhang X.
DELAMINATION/DEBOND GROWTH IN Z-FIBRE REINFORCED
COMPOSITE T-JOINT: A FINITE ELEMENT SIMULATION
View Full Article top
Zhang Z.
Sliding Wear of Polyamide 6,6
Nanocomposites
View Full Article
Friction of Polymer Composites in Liquid Hydrogen Media
View Full Article top
Zhao F. M.
Photoelastic Measurement of
Matrix Stress Field and Interfacial Shear Stress in Single Glass Fibre Model
Composites
View Full Article top
Zhao J. H.
Monte-Carlo Simulation to Fracture of Cross-ply Laminates
at Room and Low Temperature
View Full Article
Fabrication of Carbon Nanotube-TiC Nanocomposites by Spark Plasma Sintering
View Full Article top
Zhou D.
Dynamic Indentation of Lightweight Sandwich
Panels
View Full Article top
Zhou G.
Design, Manufacture and Evaluation of Bending Control of
Carbon/Epoxy Composite Beams with Embedded SMA Wires
View Full Article
|
